linux-dev/drivers/tty/serial/Kconfig, branch master

Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

2022-10-14T19:10:01Z

Pull parisc updates from Helge Deller: "Fixes: - When we added basic vDSO support in kernel 5.18 we introduced a bug which prevented a mmap() of graphic card memory. This is because we used the DMB (data memory break trap bit) page flag as special-bit, but missed to clear that bit when loading the TLB. - Graphics card memory size was not correctly aligned - Spelling fixes (from Colin Ian King) Enhancements: - PDC console (which uses firmware calls) now rewritten as early console - Reduced size of alternative tables" * tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver parisc: Fix userspace graphics card breakage due to pgtable special bit parisc: fbdev/stifb: Align graphics memory size to 4MB parisc: Convert PDC console to an early console parisc: Reduce kernel size by packing alternative tables

parisc: Convert PDC console to an early console

2022-10-11T10:01:24Z

Rewrite the PDC console to become an early console. Beside the fact that now boot information is visible until another (text- or graphics) console takes over, this benefits as well machines with a yet-unsupported STI console and kgdb. Signed-off-by: Helge Deller

Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-10-07T23:36:24Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...

tty: serial: allow pxa.c to be COMPILE_TESTed

2022-09-30T12:57:51Z

There is no issue compiling pxa.c even in the SERIAL_8250=y case. So to cover it in the usual configurations, add "|| COMPILE_TEST" there. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220927110528.12815-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL

2022-09-30T12:38:40Z

Now that the driver makes use of `__clk_is_enabled()` in order to know whether a `clk_disable_unprepare()` is needed or not on the GCLK, a new dependency has been introduced: COMMON_CLK. If this `CONFIG_COMMON_CLK` is not enabled, whatever config may have this driver enabled without COMMON_CLK then an undefined reference to `__clk_is_enabled()` will be issued by the linker. Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this driver is not compiled. Fixes: 5e3ce1f26129 ("tty: serial: atmel: Make the driver aware of the existence of GCLK") Reported-by: kernel test robot Signed-off-by: Sergiu Moga Acked-by: Nicolas Ferre Link: https://lore.kernel.org/r/20220926143244.485578-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman

tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency

2022-08-30T12:14:27Z

Remove the limitation of SERIAL_FSL_LPUART=y, as we may need enable this console while SERIAL_FSL_LPUART=m. Signed-off-by: Jindong Yue Signed-off-by: Sherry Sun Link: https://lore.kernel.org/r/20220802101613.30879-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman

arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA

2022-08-15T16:55:34Z

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang Acked-by: Guenter Roeck (for watchdog) Acked-by: Bjorn Helgaas (for drivers/pci) Acked-by: Wolfram Sang (for i2c) Acked-by: Philipp Zabel (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli

Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-08-08T18:31:40Z

Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...

serial: remove VR41XX serial driver

2022-07-16T06:16:01Z

Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman

tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

2022-07-11T16:14:11Z

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA. Signed-off-by: William Zhang Acked-by: Florian Fainelli Signed-off-by: Florian Fainelli