linux-dev/drivers/tty/serial, branch linus/master

serial: 8250: Store to lsr_save_flags after lsr read

2022-06-10T11:52:19Z

Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable Acked-by: Uwe Kleine-König Signed-off-by: Uwe Kleine-König Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman

tty: serial: qcom-geni-serial: Implement start_rx callback

2022-06-10T11:30:41Z

In suspend sequence stop_rx will be performed only if implementation for start_rx callback is present. Set qcom_geni_serial_start_rx as callback for start_rx so that stop_rx is performed. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson Signed-off-by: Vijaya Krishna Nivarthi Link: https://lore.kernel.org/r/1654627965-1461-3-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman

serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.

2022-06-10T11:30:41Z

In suspend sequence there is a need to perform stop_rx during suspend sequence to prevent any asynchronous data over rx line. However this can cause problem to drivers which dont do re-start_rx during set_termios. Add new callback start_rx and perform stop_rx only when implementation of start_rx is present. Also add call to start_rx in resume sequence so that drivers who come across this problem can make use of this framework. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson Signed-off-by: Vijaya Krishna Nivarthi Link: https://lore.kernel.org/r/1654627965-1461-2-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-06-03T18:08:40Z

Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...

Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2022-05-26T17:50:30Z

Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree contains three separate changes for linux-5.19: - The h8300 architecture is retired after it has been effectively unmaintained for a number of years. This is the last architecture we supported that has no MMU implementation, but there are still a few architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with and without an MMU. - A series to add a generic ticket spinlock that can be shared by most architectures with a working cmpxchg or ll/sc type atomic, including the conversion of riscv, csky and openrisc. This series is also a prerequisite for the loongarch64 architecture port that will come as a separate pull request. - A cleanup of some exported uapi header files to ensure they can be included from user space without relying on other kernel headers" * tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: h8300: remove stale bindings and symlink sparc: add asm/stat.h to UAPI compile-test coverage powerpc: add asm/stat.h to UAPI compile-test coverage mips: add asm/stat.h to UAPI compile-test coverage riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage kbuild: prevent exported headers from including , agpgart.h: do not include from exported header csky: Move to generic ticket-spinlock RISC-V: Move to queued RW locks RISC-V: Move to generic spinlocks openrisc: Move to ticket-spinlock asm-generic: qrwlock: Document the spinlock fairness requirements asm-generic: qspinlock: Indicate the use of mixed-size atomics asm-generic: ticket-lock: New generic ticket-based spinlock remove the h8300 architecture

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-05-26T17:43:09Z

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...

Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2022-05-25T23:55:16Z

Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...

Merge tag 'asoc-v5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2022-05-23T14:03:04Z

ASoC: Updates for v5.19 This is quite a big update, partly due to the addition of some larger drivers (more of which is to follow since at least the AVS driver is still a work in progress) and partly due to Charles' work sorting out our handling of endianness. As has been the case recently it's much more about drivers than the core. - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs. - Initial stages of Intel AVS driver merge. - Introduction of v4 IPC mechanism for SOF. - TDM mode support for AK4613. - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780

serial: stm32-usart: Correct CSIZE, bits, and parity

2022-05-19T16:32:40Z

Add CSIZE sanitization for unsupported CSIZE configurations. In addition, if parity is asked for but CSx was unsupported, the sensible result is CS8+parity which requires setting USART_CR1_M0 like with 9 bits. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c8a9d043947b (serial: stm32: fix word length configuration) Cc: Erwan Le Ray Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Sanitize CSIZE and correct PARENB for CS7

2022-05-19T16:32:40Z

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman