linux-dev/drivers/usb/chipidea, branch master

usb: chipidea: make configs for glue drivers visible with EXPERT

2022-09-08T11:32:50Z

Commit 6a108a14fa35 ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT") introduces CONFIG_EXPERT to carry the previous intent of CONFIG_EMBEDDED and just gives that intent a much better name. That has been clearly a good and long overdue renaming, and it is clearly an improvement to the kernel build configuration that has shown to help managing the kernel build configuration in the last decade. However, rather than bravely and radically just deleting CONFIG_EMBEDDED, this commit gives CONFIG_EMBEDDED a new intended semantics, but keeps it open for future contributors to implement that intended semantics: A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Since then, this CONFIG_EMBEDDED implicitly had two purposes: - It can make even more options visible beyond what CONFIG_EXPERT makes visible. In other words, it may introduce another level of enabling the visibility of configuration options: always visible, visible with CONFIG_EXPERT and visible with CONFIG_EMBEDDED. - Set certain default values of some configurations differently, following the assumption that configuring a kernel build for an embedded system generally starts with a different set of default values compared to kernel builds for all other kind of systems. Considering the first purpose, at the point in time where CONFIG_EMBEDDED was renamed to CONFIG_EXPERT, CONFIG_EXPERT already made 130 more options become visible throughout all different menus for the kernel configuration. Over the last decade, this has gradually increased, so that currently, with CONFIG_EXPERT, roughly 170 more options become visible throughout all different menus for the kernel configuration. In comparison, currently with CONFIG_EMBEDDED enabled, just seven more options are visible, one in x86, one in arm, and five for the ChipIdea Highspeed Dual Role Controller. As the numbers suggest, these two levels of enabling the visibility of even more configuration options---beyond what CONFIG_EXPERT enables---never evolved to a good solution in the last decade. In other words, this additional level of visibility of configuration option with CONFIG_EMBEDDED compared to CONFIG_EXPERT has since its introduction never become really valuable. It requires quite some investigation to actually understand what is additionally visible and it does not differ significantly in complexity compared to just enabling CONFIG_EXPERT. This CONFIG_EMBEDDED---or any other config to show more detailed options beyond CONFIG_EXPERT---is unlikely to be valuable unless somebody puts significant effort in identifying how such visibility options can be properly split and creating clear criteria, when some config option is visible with CONFIG_EXPERT and when some config option is visible only with some further option enabled beyond CONFIG_EXPERT, such as CONFIG_EMBEDDED attempted to do. For now, it is much more reasonable to simply make those additional seven options that visible with CONFIG_EMBEDDED, visible with CONFIG_EXPERT, and then remove CONFIG_EMBEDDED. If anyone spends significant effort in structuring the visibility of config options, they may re-introduce suitable new config options simply as they see fit. Make the configs for usb chipidea glue drivers visible when CONFIG_EXPERT is enabled. Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20220908104337.11940-5-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Add support for VBUS control with PHY

2022-08-31T07:07:52Z

Some platforms make use of VBUS control over PHY which means controller driver has to access PHY registers to turn on/off VBUS line.This patch adds support for such platforms in chipidea. Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature. Acked-by: Peter Chen Signed-off-by: Piyush Mehta Signed-off-by: Piyush Mehta Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2022-08-05T16:41:12Z

Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...

usb/chipidea: fix repeated words in comments

2022-07-27T12:38:01Z

Delete the redundant word 'power'. Acked-by: Peter Chen Signed-off-by: Jilin Yuan Link: https://lore.kernel.org/r/20220716131630.33151-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: tracing: Use the new __vstring() helper

2022-07-15T21:44:40Z

Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220705224749.991587733@goodmis.org Cc: Peter Chen Cc: Ingo Molnar Cc: Andrew Morton Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Steven Rostedt (Google)

Merge 5.19-rc4 into usb-next

2022-06-27T08:03:28Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: check request status before setting device address

2022-06-24T11:45:23Z

The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_imx: use dev_err_probe()

2022-06-21T14:40:54Z

Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe() Acked-by: Peter Chen Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20220614120522.1469957-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: implement get_frame

2022-06-21T14:40:51Z

The chipidea udc core is capable of reading the current frame index from hardware. This patch adds the get_frame callback to the driver. Acked-by: Peter Chen Signed-off-by: Michael Grzeschik Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman

USB: chipidea: fix typo in comment

2022-06-10T09:49:15Z

Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall Link: https://lore.kernel.org/r/20220521111145.81697-85-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman