linux-dev/drivers/usb/core, branch master

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2022-10-11T00:53:04Z

Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...

kmsan: handle memory sent to/from USB

2022-10-03T21:03:22Z

Depending on the value of is_out kmsan_handle_urb() KMSAN either marks the data copied to the kernel from a USB device as initialized, or checks the data sent to the device for being initialized. Link: https://lkml.kernel.org/r/20220915150417.722975-24-glider@google.com Signed-off-by: Alexander Potapenko Cc: Alexander Viro Cc: Alexei Starovoitov Cc: Andrey Konovalov Cc: Andrey Konovalov Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Christoph Hellwig Cc: Christoph Lameter Cc: David Rientjes Cc: Dmitry Vyukov Cc: Eric Biggers Cc: Eric Biggers Cc: Eric Dumazet Cc: Greg Kroah-Hartman Cc: Herbert Xu Cc: Ilya Leoshkevich Cc: Ingo Molnar Cc: Jens Axboe Cc: Joonsoo Kim Cc: Kees Cook Cc: Marco Elver Cc: Mark Rutland Cc: Matthew Wilcox Cc: Michael S. Tsirkin Cc: Pekka Enberg Cc: Peter Zijlstra Cc: Petr Mladek Cc: Stephen Rothwell Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vegard Nossum Cc: Vlastimil Babka Signed-off-by: Andrew Morton

usb: add quirks for Lenovo OneLink+ Dock

2022-09-30T11:54:23Z

The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream These hubs suffer from two separate problems: 1) After the host system was suspended and woken up, the hubs appear to be in a random state. Some downstream ports (both internal to the built-in audio and network controllers, and external to USB sockets) may no longer be functional. The exact list of disabled ports (if any) changes from wakeup to wakeup. Ports remain in that state until the dock is power-cycled, or until the laptop is rebooted. Wakeup sources connected to the hubs (keyboard, WoL on the integrated gigabit controller) will wake the system up from suspend, but they may no longer work after wakeup (and in that case will no longer work as wakeup source in a subsequent suspend-wakeup cycle). This issue appears in the logs with messages such as: usb 1-6.1-port4: cannot disable (err = -71) usb 1-6-port2: cannot disable (err = -71) usb 1-6.1: clear tt 1 (80c0) error -71 usb 1-6-port4: cannot disable (err = -71) usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71 usb 1-6.4: PM: failed to resume async: error -71 usb 1-7: reset full-speed USB device number 5 using xhci_hcd usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) 2) Some USB devices cannot be enumerated properly. So far I have only seen the issue with USB 3.0 devices. The same devices work without problem directly connected to the host system, to other systems or to other hubs (even when those hubs are connected to the OneLink+ dock). One very reliable reproducer is this USB 3.0 HDD enclosure: 152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius I have seen it happen sporadically with other USB 3.0 enclosures, with controllers from different manufacturers, all self-powered. Typical messages in the logs: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 6, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 7, error -62 usb 2-1-port4: attempt power cycle xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 8, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 9, error -62 usb 2-1-port4: unable to enumerate USB device Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved the second issue. Further testing then uncovered the first issue. Test results are summarized in this table: ======================================================================================= Settings USB2 hotplug USB3 hotplug State after waking up --------------------------------------------------------------------------------------- power/control=auto works fails broken usbcore.autosuspend=-1 works works broken OR power/control=on power/control=auto works (1) works (1) works and USB_QUIRK_RESET_RESUME power/control=on works works works and USB_QUIRK_RESET_RESUME HUB_QUIRK_DISABLE_AUTOSUSPEND works works works and USB_QUIRK_RESET_RESUME ======================================================================================= In those results, the power/control settings are applied to both hubs, both on the USB2 and USB3 side, before each test. From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs properly after a suspend-wakeup cycle, and the hubs must not autosuspend to work around the USB3 issue. A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs' upstream links from suspending (the downstream ports can still suspend). This secondary effect is used in results (1). It is enough to solve the USB3 problem. Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that solves both issues. Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via the kernel command line for over a year without noticing any side effect. Thanks to Oliver Neukum @Suse for explanations of the operations of USB_QUIRK_RESET_RESUME, and requesting more testing. Signed-off-by: Jean-Francois Le Fillatre Cc: stable Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman

Merge 6.0-rc7 into usb-next

2022-09-26T08:38:21Z

We need the USB fixes in here for other follow-on changes to be able to be applied successfully. Signed-off-by: Greg Kroah-Hartman

USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM

2022-09-22T13:52:30Z

NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen Cc: stable # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman

USB: core: Fix RST error in hub.c

2022-09-05T11:06:34Z

A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: Reported-by: Stephen Rothwell Reviewed-by: Bagas Sanjaya Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

Merge 6.0-rc4 into usb-next

2022-09-05T06:03:23Z

We need the USB fixes in here and this resolves the merge issue in: drivers/usb/dwc3/gadget.c Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

USB: hcd-pci: Drop the unused id parameter from usb_hcd_pci_probe()

2022-09-01T14:08:35Z

Since the HC driver is now passed to the function with its own parameter (it used to be picked from id->driver_data), the id parameter serves no purpose. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: add quirks for Lenovo OneLink+ Dock"

2022-08-31T08:34:25Z

This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum Cc: Jean-Francois Le Fillatre Cc: stable Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman

usb: host: Initiate urb ep with udev ep0

2022-08-31T07:07:53Z

Currently we look up for endpoint in a table and initate urb endpoint with it. This is unnecessary because the lookup will always result in endpoint 0. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Khalid Masum Link: https://lore.kernel.org/r/20220824203107.14908-1-khalid.masum.92@gmail.com Signed-off-by: Greg Kroah-Hartman