linux-dev/drivers/usb/dwc2, branch master

usb: dwc2: Remove redundant license text

2022-09-22T13:52:29Z

SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

usb: dwc2: fix wrong order of phy_power_on and phy_init

2022-08-30T13:31:16Z

Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan Acked-by: Marek Szyprowski Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: drop unexpected word "the" in the comments

2022-06-24T11:37:34Z

there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/usb/dwc2/hcd.c line: 1002 * even and the current frame number is even the the transfer changed to: * even and the current frame number is even the transfer Signed-off-by: Jiang Jian Link: https://lore.kernel.org/r/20220622103558.6647-1-jiangjian@cdjrlc.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch

2022-06-24T11:37:27Z

When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is cleared, whatever the vbus valid signal state is. The pull-up should not be set when vbus isn't present (this is determined by the drd controller). This patch ensures that B-Session (so Peripheral role + vbus valid signal) is valid before clearing the DCTL_SFTDISCON bit when role switch is used. Keep original behavior when usb-role-switch isn't used. Acked-by: Minas Harutyunyan Signed-off-by: Amelie Delaunay Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: host: add TPL support

2022-06-22T05:38:22Z

The Target Peripheral List (TPL) is used to identify targeted devices during Embedded Host compliance testing. The user can add "tpl-support" in the device tree to enable it. Signed-off-by: Amelie Delaunay Signed-off-by: Fabrice Gasnier Acked-by: Minas Harutyunyan Link: https://lore.kernel.org/r/20220621152350.145745-5-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix memory leak in dwc2_hcd_init

2022-06-10T09:12:20Z

usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable Acked-by: Minas Harutyunyan Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: don't reset gadget's driver->bus

2022-05-05T19:52:16Z

UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman

USB: dwc2: Add OTG support for Ingenic SoCs.

2022-04-21T17:22:00Z

Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Acked-by: Minas Harutyunyan Signed-off-by: Dragan Čečavac Signed-off-by: 周琰杰 (Zhou Yanjie) Link: https://lore.kernel.org/r/1649964337-114337-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman

Merge 5.17-rc6 into usb-next

2022-02-28T20:42:36Z

We need the USB fixes in here, and it resolves a merge conflict in: drivers/usb/dwc3/dwc3-pci.c Signed-off-by: Greg Kroah-Hartman

usb: dwc2: drd: fix soft connect when gadget is unconfigured

2022-02-17T15:10:21Z

When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman