linux-dev/drivers/usb/dwc3, branch master

usb: dwc3: gadget: Don't set IMI for no_interrupt

2022-10-26T16:31:56Z

The gadget driver may have a certain expectation of how the request completion flow should be from to its configuration. Make sure the controller driver respect that. That is, don't set IMI (Interrupt on Missed Isoc) when usb_request->no_interrupt is set. Also, the driver should only set IMI to the last TRB of a chain. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Reviewed-by: Jeff Vanhoof Tested-by: Jeff Vanhoof Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Stop processing more requests on IMI

2022-10-26T16:31:55Z

When servicing a transfer completion event, the dwc3 driver will reclaim TRBs of started requests up to the request associated with the interrupt event. Currently we don't check for interrupt due to missed isoc, and the driver may attempt to reclaim TRBs beyond the associated event. This causes invalid memory access when the hardware still owns the TRB. If there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure to stop servicing further. Note that only the last TRB of chained TRBs has its status updated with missed isoc. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Reported-by: Jeff Vanhoof Reported-by: Dan Vacura Signed-off-by: Thinh Nguyen Reviewed-by: Jeff Vanhoof Tested-by: Jeff Vanhoof Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: st: Rely on child's compatible instead of name

2022-10-25T17:06:13Z

To ensure that child node is found, don't rely on child's node name which can take different value, but on child's compatible name. Fixes: f5c5936d6b4d ("usb: dwc3: st: Fix node's child name") Cc: stable Cc: Jerome Audu Reported-by: Felipe Balbi Signed-off-by: Patrice Chotard Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Don't delay End Transfer on delayed_status

2022-10-22T10:30:00Z

The gadget driver may wait on the request completion when it sets the USB_GADGET_DELAYED_STATUS. Make sure that the End Transfer command can go through if the dwc->delayed_status is set so that the request can complete. When the delayed_status is set, the Setup packet is already processed, and the next phase should be either Data or Status. It's unlikely that the host would cancel the control transfer and send a new Setup packet during End Transfer command. But if that's the case, we can try again when ep0state returns to EP0_SETUP_PHASE. Fixes: e1ee843488d5 ("usb: dwc3: gadget: Force sending delayed status during soft disconnect") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/3f9f59e5d74efcbaee444cf4b30ef639cc7b124e.1666146954.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Don't switch OTG -> peripheral if extcon is present

2022-10-22T10:29:43Z

If the extcon device exists, get the mode from the extcon device. If the controller is DRD and the driver is unable to determine the mode, only then default the dr_mode to USB_DR_MODE_PERIPHERAL. Reported-by: Steev Klimaszewski Fixes: 7a84e7353e23 ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") Cc: stable Reviewed-by: Thinh Nguyen Signed-off-by: Andrey Smirnov Signed-off-by: Andy Shevchenko Tested-by: Steev Klimaszewski Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20221017233510.53336-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-10-07T23:48:26Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...

Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"

2022-09-30T11:56:38Z

This reverts commit 0f01017191384e3962fa31520a9fd9846c3d352f. As pointed out by Ferry this breaks Dual Role support on Intel Merrifield platforms. Fixes: 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Reported-by: Ferry Toth Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Tested-by: Ferry Toth # for Merrifield Reviewed-by: Sven Peter Link: https://lore.kernel.org/r/20220927155332.10762-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""

2022-09-30T11:56:38Z

This reverts commit 8bd6b8c4b1009d7d2662138d6bdc6fe58a9274c5. Prerequisite revert for the reverting of the original commit 0f0101719138. Fixes: 8bd6b8c4b100 ("USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") Fixes: 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Reported-by: Ferry Toth Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Tested-by: Ferry Toth # for Merrifield Link: https://lore.kernel.org/r/20220927155332.10762-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: st: Fix node's child name

2022-09-27T08:50:01Z

Update node's child name from "dwc3" to "usb", this fixes the following issue: [3.773852] usb-st-dwc3 8f94000.dwc3: failed to find dwc3 core node Fixes: 3120910a099b ("ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name") Reported-by: Jerome Audu Signed-off-by: Patrice Chotard Link: https://lore.kernel.org/r/20220926124359.304770-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman

Merge 6.0-rc7 into usb-next

2022-09-26T08:38:21Z

We need the USB fixes in here for other follow-on changes to be able to be applied successfully. Signed-off-by: Greg Kroah-Hartman