linux-dev/drivers/usb/host, branch linus/master

xhci: Fix null pointer dereference in resume if xhci has only one roothub

2022-06-10T11:57:20Z

In the re-init path xhci_resume() passes 'hcd->primary_hcd' to hci_init(), however this field isn't initialized by __usb_create_hcd() for a HCD without secondary controller. xhci_resume() is called once per xHC device, not per hcd, so the extra checking for primary hcd can be removed. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220610115338.863152-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-06-03T18:17:49Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:23:54Z

Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-05-26T17:43:09Z

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...

usb: Probe EHCI, OHCI controllers asynchronously

2022-05-19T16:11:25Z

initcall_debug shows that OHCI controllers take ~60ms to probe on Rockchip RK3399 systems: probe of fe3a0000.usb returned 1 after 58941 usecs A few of these can add up to waste non-trivial amounts of time at boot. These host controllers don't provide resources to other drivers, so this shouldn't contribute to exposing race conditions. Chrome OS kernels have carried this patch on some systems for a while without issues. Similar patches have been merged for a variety of (e)MMC host controllers for similar reasons. [Brian: rewrote commit message, refreshed, but retained dtor's original authorship ] Acked-by: Alan Stern Signed-off-by: Dmitry Torokhov Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20220518150150.1.Ie8ea0e945a9c15066237014be219eed60066d493@changeid Signed-off-by: Greg Kroah-Hartman

xhci: Don't defer primary roothub registration if there is only one roothub

2022-05-19T16:10:16Z

The support for xHCI controllers with only one roothub, and the code to defer primary roothub registation until second roothub got merged to usb-next for 5.19 at the same time. commit 873f323618c2 ("xhci: prepare for operation w/o shared hcd") commit b7a4f9b5d0e4 ("xhci: Set HCD flag to defer primary roothub registration") These got merged in such a way that the flag to defer primary roothub registration is set even for xHC controllers with just one roothub. Fix this by setting the defer flag in a codepath taken only if we have two roothubs Fixes: 873f323618c2 ("xhci: prepare for operation w/o shared hcd") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220516094850.19788-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()

2022-05-19T12:22:05Z

Simplify xen-hcd's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross Acked-by: Greg Kroah-Hartman Signed-off-by: Juergen Gross

xen/usb: switch xen-hcd to use INVALID_GRANT_REF

2022-05-19T12:21:43Z

Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross Acked-by: Greg Kroah-Hartman Signed-off-by: Juergen Gross

usb: xhci-mtk: remove bandwidth budget table

2022-05-12T16:35:38Z

The bandwidth budget table is introduced to trace ideal bandwidth used by each INT/ISOC endpoint, but in fact the endpoint may consume more bandwidth and cause data transfer error, so it's better to leave some margin. Obviously it's difficult to find the best margin for all cases, instead take use of the worst-case scenario. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20220512064931.31670-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix fs isoc's transfer error

2022-05-12T16:35:38Z

Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints, this may be not enough actually and causes data transfer error, so come up with an estimate that is no less than the worst case bandwidth used for any one mframe, but may be an over-estimate. Fixes: 451d3912586a ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman