linux-dev/drivers/usb/renesas_usbhs/common.h, branch linus/master

usb: renesas_usbhs: Use platform_get_irq() to get the interrupt

2021-12-21T07:51:57Z

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Drop irqflags member from struct usbhs_priv as this driver is used by two non DT users sh7757lcr and ecovec24 which do not pass IORESOURCE_IRQ_SHAREABLE as part of their pdata. Along this drop the IRQF_SHARED flag handling in the code. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20211220010411.12075-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: Use the correct style for SPDX License Identifier

2020-04-23T13:28:14Z

This patch corrects the SPDX License Identifier style in header files related to Renesas USBHS Controller Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20200419125705.GA5172@nishad Signed-off-by: Greg Kroah-Hartman

Merge 5.4-rc3 into usb-next

2019-10-14T05:09:59Z

we want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior

2019-10-04T12:36:22Z

According to usb_ep_set_halt()'s description, __usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint has any queue or data. Otherwise, this driver is possible to cause just STALL without sending a short packet data on g_mass_storage driver, and then a few resetting a device happens on a host side during a usb enumaration. Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: # v3.0+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1569924633-322-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: add suspend event support in gadget mode

2019-10-04T12:16:54Z

When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt will be generated and Suspended state bit is set in interrupt status register. Interrupt handler will call driver->suspend(composite_suspend) if suspended state bit is set. composite_suspend will call ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed by user space application via /dev/ep0. To be able to detect host detach, extend the DVSQ_MASK to cover the Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status Register 0 (INTSTS0) register and perform appropriate action in the DVST interrupt handler (usbhsg_irq_dev_state). Without this commit, disconnection of the phone from R-Car-H3 ES2.0 Salvator-X CN9 port is not recognized and reverse role switch does not happen. If phone is connected again it does not enumerate. With this commit, disconnection will be recognized and reverse role switch will happen by a user space application. If phone is connected again it will enumerate properly and will become visible in the output of 'lsusb'. Signed-off-by: Veeraiyan Chidambaram Signed-off-by: Eugeniu Rosca Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiyan.c@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: Use struct platform_callback pointer

2019-06-26T02:33:09Z

Now the driver fixes the issue of the commit 482982062f1b ("usb: gadget: renesas_usbhs: bugfix: don't modify platform data") by using usbhs_mod_info.get_vbus, this patches uses the pointer instead of copied value to avoid redundancy. Note that struct renesas_usbhs_driver_param has to use copied value because the driver has to set some members (e.g. buswait_bwait). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: Use renesas_usbhs_platform_info on of_device_id.data

2019-06-26T02:33:09Z

In device tree environment, the previous code allocates renesas_usbhs_platform_info by using devm_kzalloc() and then copies usbhs_of_data to the allocated memory. This reason is some values (e.g. .platform_callback.get_vbus) are overwritten by the driver, but the of_device_id.data is "const". Now the driver doesn't have such a code, so this patch uses renesas_usbhs_platform_info on of_device_id.data. Note that the previous code set the pdev->dev.platform_data pointer even if device tree environment, but the value is not used. So, this patch also remove such a code. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: Add a common function for the .get_id

2019-06-26T02:33:09Z

All platform related codes (rcar[23].c and rza{2}.c) has its own .get_id function as "USBHS_GADGET". So, we can use a common function for it. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: remove notify_hotplug callback

2019-06-26T02:33:08Z

The notify_hotplug callback was supported in v3.10, but the last user (armadillo800eva) was removed by the commit 1fa59bda21c7 ("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA"). So, this patch removes it. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

usb: renesas_usbhs: add support for CNEN bit

2019-05-21T08:25:59Z

For some SoC, CNEN must be set for USB Device mode operation. Signed-off-by: Chris Brandt Reviewed-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Greg Kroah-Hartman