linux-dev/drivers/usb/typec/tcpm, branch linus/master

Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-06-03T18:36:34Z

Pull char / misc / other smaller driver subsystem updates from Greg KH: "Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems" * tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits) habanalabs: use separate structure info for each error collect data habanalabs: fix missing handle shift during mmap habanalabs: remove hdev from hl_ctx_get args habanalabs: do MMU prefetch as deferred work habanalabs: order memory manager messages habanalabs: return -EFAULT on copy_to_user error habanalabs: use NULL for eventfd habanalabs: update firmware header habanalabs: add support for notification via eventfd habanalabs: add topic to memory manager buffer habanalabs: handle race in driver fini habanalabs: add device memory scrub ability through debugfs habanalabs: use unified memory manager for CB flow habanalabs: unified memory manager new code for CB flow habanalabs/gaudi: set arbitration timeout to a high value habanalabs: add put by handle method to memory manager habanalabs: hide memory manager page shift habanalabs: Add separate poll interval value for protocol habanalabs: use get_task_pid() to take PID habanalabs: add prefetch flag to the MAP operation ...

extcon: Fix extcon_get_extcon_dev() error handling

2022-05-13T08:03:40Z

The extcon_get_extcon_dev() function returns error pointers on error, NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV) when the CONFIG_EXTCON option is disabled. This is very complicated for the callers to handle and a number of them had bugs that would lead to an Oops. In real life, there are two things which prevented crashes. First, error pointers would only be returned if there was bug in the caller where they passed a NULL "extcon_name" and none of them do that. Second, only two out of the eight drivers will build when CONFIG_EXTCON is disabled. The normal way to write this would be to return -EPROBE_DEFER directly when appropriate and return NULL when CONFIG_EXTCON is disabled. Then the error handling is simple and just looks like: dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev)); if (IS_ERR(dev->edev)) return PTR_ERR(dev->edev); For the two drivers which can build with CONFIG_EXTCON disabled, then extcon_get_extcon_dev() will now return NULL which is not treated as an error and the probe will continue successfully. Those two drivers are "typec_fusb302" and "max8997-battery". In the original code, the typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but now that function is a no-op. For the max8997-battery driver everything should continue working as is. Signed-off-by: Dan Carpenter Reviewed-by: Hans de Goede Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Acked-by: Sebastian Reichel Signed-off-by: Chanwoo Choi

usb: typec: tcpci_mt6360: Update for BMC PHY setting

2022-05-12T16:33:17Z

Update MT6360 BMC PHY Tx/Rx setting for the compatibility. Macpaul reported this CtoDP cable attention message cannot be received from MT6360 TCPC. But actually, attention message really sent from UFP_D device. After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue. Below's the detailed TCPM log and DP attention message didn't received from 6360 TCPCI. [ 1206.367775] Identity: 0000:0000.0000 [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start [ 1206.447383] PD TX, header: 0x1d6f [ 1206.449393] PD TX complete, status: 0 [ 1206.454110] PD RX, header: 0x184f [1] [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished [ 1206.456873] cc:=4 [ 1206.473100] AMS STRUCTURED_VDMS start [ 1206.473103] PD TX, header: 0x2f6f [ 1206.475397] PD TX complete, status: 0 [ 1206.480442] PD RX, header: 0x2a4f [1] [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 [ 1206.483150] AMS STRUCTURED_VDMS finished [ 1206.483151] cc:=4 [ 1206.505643] AMS STRUCTURED_VDMS start [ 1206.505646] PD TX, header: 0x216f [ 1206.507933] PD TX complete, status: 0 [ 1206.512664] PD RX, header: 0x1c4f [1] [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 [ 1206.515460] AMS STRUCTURED_VDMS finished [ 1206.515461] cc:=4 Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver") Cc: stable Reported-by: Macpaul Lin Tested-by: Macpaul Lin Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: ChiYuan Huang Signed-off-by: Fabien Parent Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: Don't skip cleanup in .remove() on error

2022-05-05T20:17:43Z

Returning an error value in an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. In this case the remove callback even returns early without stopping the tcpm worker thread and various timers. A work scheduled on the work queue, or a firing timer after tcpci_remove() returned probably results in a use-after-free situation because the regmap and driver data were freed. So better make sure that tcpci_unregister_port() is called even if disabling the irq failed. Also emit a more specific error message instead of the i2c core's "remove failed (EIO), will be ignored" and return 0 to suppress the core's warning. This patch is (also) a preparation for making i2c remove callbacks return void. Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver") Signed-off-by: Uwe Kleine-König Cc: stable Acked-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: typec: Factor out non-PD fwnode properties

2022-02-17T15:21:57Z

Basic programmable non-PD Type-C port controllers do not need the full TCPM library, but they share the same devicetree binding and the same typec_capability structure. Factor out a helper for parsing those properties which map to fields in struct typec_capability, so the code can be shared between TCPM and basic non-TCPM drivers. Reviewed-by: Heikki Krogerus Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Do not disconnect when receiving VSAFE0V

2022-01-25T17:41:18Z

With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V causing VSAFE0V to be triggered. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: 28b43d3d746b8 ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20220122015520.332507-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Do not disconnect while receiving VBUS off

2022-01-25T17:41:18Z

With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: don't touch CC line if it's Vconn source

2022-01-25T17:36:51Z

With the AMS and Collision Avoidance, tcpm often needs to change the CC's termination. When one CC line is sourcing Vconn, if we still change its termination, the voltage of the another CC line is likely to be fluctuant and unstable. Therefore, we should verify whether a CC line is sourcing Vconn before changing its termination and only change the termination that is not a Vconn line. This can be done by reading the Vconn Present bit of POWER_ STATUS register. To determine the polarity, we can read the Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be sourced if Plug Orientation is set. Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: fix tcpm unregister port but leave a pending timer

2021-12-15T22:45:30Z

In current design, when the tcpm port is unregisterd, the kthread_worker will be destroyed in the last step. Inside the kthread_destroy_worker(), the worker will flush all the works and wait for them to end. However, if one of the works calls hrtimer_start(), this hrtimer will be pending until timeout even though tcpm port is removed. Once the hrtimer timeout, many strange kernel dumps appear. Thus, we can first complete kthread_destroy_worker(), then cancel all the hrtimers. This will guarantee that no hrtimer is pending at the end. Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20211209101507.499096-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect

2021-12-03T12:57:10Z

Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman