linux-dev/drivers/vme/bridges, branch master

vme: move back to staging

2022-06-10T13:38:14Z

The VME subsystem graduated from staging into a top-level subsystem in 2012, with commit db3b9e990e75 ("Staging: VME: move VME drivers out of staging") stating: The VME device drivers have not moved out yet due to some API questions they are still working through, that should happen soon, hopefully. However, this never happened: maintenance of drivers/vme effectively stopped in 2017, with all subsequent changes being treewide cleanups. No hardware driver remains in staging, only the limited user-level access, and I just removed one of the two bridge drivers and the only remaining board. drivers/staging/vme/devices/ was recently moved to drivers/staging/vme_user/, but as the vme_user driver is the only one remaining for this subsystem, it is easier to just move the remaining three source files into this directory rather than keeping the original hierarchy. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220606084109.4108188-3-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

vme: remove ca91cx42 Universe-II support

2022-06-10T13:37:59Z

This is one of four remaining drivers using the ancient virt_to_bus() interface instead of the dma-mapping interface, making it incompatible with most modern machines. As nobody has cleaned this up, there is a high chance that this driver has no actual users. The chip was introduced in 1997 and only supports 32-bit legacy PCI. It was replaced by TSI148 in 2004, but that chip has since been discontinued, while a version of the older Universe II remains in production after 25 years. The vme_vmivme7805 board uses Universe-II, so this also gets removed in the process, but PCI add-on cards based on TSI148 can still work in theory. If there are users of the Universe-II driver after all, it is of course possible to revert this patch and fix it to use the dma-mapping interface like the tsi148 driver does. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220606084109.4108188-2-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

vme: switch from 'pci_' to 'dma_' API

2020-12-09T18:44:34Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ca91cx42_alloc_consistent()' and 'tsi148_alloc_consistent()' GFP_KERNEL can be used because both functions are called only from 'vme_alloc_consistent()' (vme.c). This function is only called from the 'vme_user_probe()' probe function and no lock is taken in the between. When memory is allocated in 'ca91cx42_crcsr_init()' and 'tsi148_crcsr_init()' GFP_KERNEL can be used because both functions are called only from their corresponding probe function and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/20201206071352.21949-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

vme: remove unneeded break

2020-11-09T15:05:09Z

A break is not needed if it is preceded by a return or goto Signed-off-by: Tom Rix Link: https://lore.kernel.org/r/20201019165112.29091-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-01-29T18:35:54Z

Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...

vme: bridges: reduce stack usage

2020-01-14T20:46:47Z

With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake grows above the warning limit: drivers/vme/bridges/vme_fake.c: In function 'fake_master_read': drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] drivers/vme/bridges/vme_fake.c: In function 'fake_master_write': drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The problem is that in some configurations, each call to fake_vmereadX() puts another variable on the stack. Reduce the amount of inlining to get back to the previous state, with no function using more than 200 bytes each. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200107200610.3482901-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59Z

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

vme: ca91cx42: remove redundant variable i

2018-07-16T10:03:53Z

Variable i is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'i' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Reviewed-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman