linux-dev/drivers/w1, branch linus/master

w1/ds2490: remove dump from ds_recv_status, pr_ to dev_XXX logging.

2022-04-24T15:30:22Z

Changed all remaining pr_XXX calls that write out debugging info into dev_XXX calls, changed the needlessly verbose decoding of status bits into dev_dbg(), so that it's supressed by the logging levels by default. Forthermore the ds_recv_status function has a "dump" parameter that enables extremely verbose logging, and that's used only once. This has been factored out, and called explicitly at that one place. Signed-off-by: Christian Vogel Link: https://lore.kernel.org/r/20220324193246.16814-2-vogelchr@vogel.cx Signed-off-by: Greg Kroah-Hartman

w1: w1_therm: Add support for Maxim MAX31850 thermoelement IF.

2022-03-18T13:07:09Z

MAX31850 shares family number 0x3B with DS1825. The device is generally compatible with DS1825 but needs a different temperature readout. It operates always in 14 bit mode and has all 4 higher bits of the Config register set to 1. Conversion time is 100ms. Signed-off-by: Markus Reichl Link: https://lore.kernel.org/r/20220306145817.8753-1-m.reichl@fivetechno.de Signed-off-by: Greg Kroah-Hartman

w1/ds2490: remove spurious newlines within hexdump

2022-03-18T13:07:01Z

Multiple pr_infos generate newlines, so the hexdump looks like... > 0x81: count=16, status: > 01 > 00 > 20 (...16 lines...) We switch to a single %*ph hexdump, using the built-in %ph format, which leads to this: [52769.348789] usb 2-1.3.1: Clearing ep0x83. [52769.349729] usb 2-1.3.1: ep_status=0x81, count=16,... ...status=01:00:20:40:05:04:04:00:20:53:00:00:00:00:00:00 Signed-off-by: Christian Vogel Link: https://lore.kernel.org/r/20220311192833.1792-2-vogelchr@vogel.cx Signed-off-by: Greg Kroah-Hartman

w1: w1_therm: fixes w1_seq for ds28ea00 sensors

2022-02-25T10:54:38Z

w1_seq was failing due to several devices responding to the CHAIN_DONE at the same time. Now properly selects the current device in the chain with MATCH_ROM. Also acknowledgment was read twice. Signed-off-by: Lucas Denefle Link: https://lore.kernel.org/r/20220223113558.232750-1-lucas.denefle@converge.io Signed-off-by: Greg Kroah-Hartman

w1: w1_therm: use swap() to make code cleaner

2021-12-21T09:38:13Z

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot Signed-off-by: David Yang Signed-off-by: Yang Guang Link: https://lore.kernel.org/r/cb14f9e6e86cf8494ed2ddce6eec8ebd988908d9.1640077704.git.yang.guang5@zte.com.cn Signed-off-by: Greg Kroah-Hartman

w1: Misuse of get_user()/put_user() reported by sparse

2021-12-03T13:30:05Z

sparse warnings: (new ones prefixed by >>) >> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char [noderef] __user *_pu_addr @@ got char *buf @@ drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: expected char [noderef] __user *_pu_addr drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: got char *buf >> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char const [noderef] __user *_gu_addr @@ got char const *buf @@ drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: expected char const [noderef] __user *_gu_addr drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: got char const *buf The buffer buf is a failsafe buffer in kernel space, it's not user memory hence doesn't deserve the use of get_user() or put_user(). Access 'buf' content directly. Link: https://lore.kernel.org/lkml/202111190526.K5vb7NWC-lkp@intel.com/T/ Reported-by: kernel test robot Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman

w1: ds2482: fix kernel-doc syntax in file

2021-05-26T07:11:05Z

The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The comments for drivers/w1/masters/ds2482.c follows this syntax, but the content inside does not comply with kernel-doc. Similarly, the syntax for function and arguments declaration as well. Fix all such occurrences appropriately. Tested-by: Randy Dunlap Reviewed-by: Randy Dunlap Signed-off-by: Aditya Srivastava Link: https://lore.kernel.org/r/20210523150122.21160-1-yashsri421@gmail.com Signed-off-by: Greg Kroah-Hartman

w1: ds2438: support for writing to offset register

2021-05-21T12:51:33Z

Added a sysfs entry to support writing to the offset register on page1. This register is used to calibrate the chip canceling offset errors in the current ADC. This means that, over time, reading the IAD register will not return the correct current measurement, it will have an offset. Writing to the offset register if the two's complement of the current register while passing zero current to the load will calibrate the measurements. This change was tested on real hardware and it was able to calibrate the chip correctly. Signed-off-by: Luiz Sampaio Link: https://lore.kernel.org/r/20210519223046.13798-7-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman

w1: ds2438: adding support for reading page1

2021-05-21T12:51:33Z

Added a sysfs entry to support reading the page1 registers. This registers contain Elapsed Time Meter (ETM) data, which shows for how long the chip is on, as well as an Offset Register data, which can be used to calibrate the current measurement of the chip. Signed-off-by: Luiz Sampaio Link: https://lore.kernel.org/r/20210519223046.13798-6-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman

w1: ds2438: fixing bug that would always get page0

2021-05-21T12:51:33Z

The purpose of the w1_ds2438_get_page function is to get the register values at the page passed as the pageno parameter. However, the page0 was hardcoded, such that the function always returned the page0 contents. Fixed so that the function can retrieve any page. Signed-off-by: Luiz Sampaio Link: https://lore.kernel.org/r/20210519223046.13798-5-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman