linux-dev/drivers/watchdog/Makefile, branch linus/master

Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:27:44Z

Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ...

watchdog: Add Renesas RZ/N1 Watchdog driver

2022-05-21T08:09:31Z

This is a driver for the standard WDT on the RZ/N1 devices. This WDT has very limited timeout capabilities. However, it can reset the device. To do so, the corresponding bits in the SysCtrl RSTEN register need to be enabled. This is not done by this driver. Signed-off-by: Phil Edworthy Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tzung-Bi Shih Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: hpe-wdt: Introduce HPE GXP Watchdog

2022-05-18T12:05:53Z

Add support for the HPE GXP Watchdog. The GXP asic contains a full complement of timers one of which is the watchdog timer. The watchdog timer is 16 bit and has 10ms resolution. The watchdog is created as a child device of timer since the same register range is used. Signed-off-by: Nick Hawkins Signed-off-by: Arnd Bergmann Acked-by: Guenter Roeck

watchdog: Add watchdog driver for Sunplus SP7021

2022-05-08T08:34:05Z

Sunplus SP7021 requires watchdog timer support. Add watchdog driver to enable this. Signed-off-by: Xiantao Hu Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220324031805.61316-3-xt.hu@cqplus1.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

Merge tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog

2022-01-17T06:07:57Z

Pull watchdog updates from Wim Van Sebroeck: - New device support: - Watchdog Timer driver for RZ/G2L - Realtek Otto watchdog timer - Apple SoC watchdog driver - Fintek F81966 - Remove BCM63XX_WDT after support for this SoC was added to BCM7038_WDT - Improvements of the BCM7038_WDT and s3c2410_wdt code - Several other fixes and improvements * tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: msc313e: Check if the WDT was running at boot watchdog: Add Apple SoC watchdog driver dt-bindings: watchdog: Add SM6350 and SM8250 compatible watchdog: s3c2410: Fix getting the optional clock watchdog: s3c2410: Use platform_get_irq() to get the interrupt dt-bindings: watchdog: atmel: Add missing 'interrupts' property watchdog: mtk_wdt: use platform_get_irq_optional watchdog: Add Watchdog Timer driver for RZ/G2L dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L watchdog: da9063: Add hard dependency on I2C watchdog: Add Realtek Otto watchdog timer dt-bindings: watchdog: Realtek Otto WDT binding watchdog: s3c2410: Add Exynos850 support watchdog: da9063: use atomic safe i2c transfer in reset handler watchdog: davinci: Use div64_ul instead of do_div watchdog: Remove BCM63XX_WDT MIPS: BCM63XX: Provide platform data to watchdog device watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt watchdog: Allow building BCM7038_WDT for BCM63XX watchdog: bcm7038_wdt: Support platform data configuration ...

watchdog: Add Apple SoC watchdog driver

2022-01-05T09:38:37Z

Add support for the watchdog timer found in Apple SoCs. This driver is also required to reboot these machines. Signed-off-by: Sven Peter Tested-by: Janne Grunau Reviewed-by: Hector Martin Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20211211123633.4392-2-sven@svenpeter.dev Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add Watchdog Timer driver for RZ/G2L

2022-01-05T09:33:15Z

Add Watchdog Timer driver for RZ/G2L SoC. WDT IP block supports normal watchdog timer function and reset request function due to CPU parity error. This driver currently supports normal watchdog timer function and later will add support for reset request function due to CPU parity error. Signed-off-by: Biju Das Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add Realtek Otto watchdog timer

2022-01-05T09:33:14Z

Realtek MIPS SoCs (platform name Otto) have a watchdog timer with pretimeout notifitication support. The WDT can (partially) hard reset, or soft reset the SoC. This driver implements all features as described in the devicetree binding, except the phase2 interrupt, and also functions as a restart handler. The cpu reset mode is considered to be a "warm" restart, since this mode does not reset all peripherals. Being an embedded system though, the "cpu" and "software" modes will still cause the bootloader to run on restart. It is not known how a forced system reset can be disabled on the supported platforms. This means that the phase2 interrupt will only fire at the same time as reset, so implementing phase2 is of little use. Signed-off-by: Sander Vanheule Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Remove BCM63XX_WDT

2021-12-28T13:03:03Z

Now that we can utilize the BCM7038_WDT driver, remove that one which was not converted to the watchdog APIs. There are a couple of notable differences with how the bcm7038_wdt driver proceeds: - bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API, but this would only be used in order to catch the interrupt *before* a SoC reset and make the kernel "die" - bcm6xx_wdt would register a software timer and kick it every second in order to pet the watchdog, thus offering a two step watchdog process. This is not something that is brought over to the bcm7038_wdt as it is deemed unnecessary. If user-space cannot pet the watchdog, but a kernel timer can, the system is still in a bad shape anyway. bcm7038_wdt is simpler in its behavior and behaves as a standard watchdog driver and is not making use of any specific platform APIs, therefore making it more maintainable and extensible. Signed-off-by: Florian Fainelli Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs

2021-12-23T17:09:28Z

This driver adds initial support for several devices from Siemens. It is based on a platform driver introduced in an earlier commit. One of the supported machines does access a GPIO pin to enable the watchdog. Here we poke GPIO memory because pinctrl does not come up. Signed-off-by: Henning Schild Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com Signed-off-by: Hans de Goede