linux-dev/drivers/watchdog, branch linus/master

watchdog: gxp: Add missing MODULE_LICENSE

2022-06-09T10:20:34Z

The build system says: ERROR: modpost: missing MODULE_LICENSE() in drivers/watchdog/gxp-wdt.o Add the missing MODULE_LICENSE. Signed-off-by: Nick Hawkins Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/all/20220603131419.2948578-1-linux@roeck-us.net/ Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:27:44Z

Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ...

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:23:54Z

Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...

watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe

2022-05-21T08:09:31Z

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() in some error paths. Fixes: bf9006399939 ("watchdog: ts4800: add driver for TS-4800 watchdog") Signed-off-by: Miaoqian Lin Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220511114203.47420-1-linmq006@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add Renesas RZ/N1 Watchdog driver

2022-05-21T08:09:31Z

This is a driver for the standard WDT on the RZ/N1 devices. This WDT has very limited timeout capabilities. However, it can reset the device. To do so, the corresponding bits in the SysCtrl RSTEN register need to be enabled. This is not done by this driver. Signed-off-by: Phil Edworthy Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tzung-Bi Shih Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: wdat_wdt: Stop watchdog when uninstalling module

2022-05-21T08:09:30Z

Test shows that wachdog still reboots machine after the module is removed. Use watchdog_stop_on_unregister to stop the watchdog on removing. Signed-off-by: Liu Xinpeng eviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/1650984810-6247-4-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: wdat_wdt: Stop watchdog when rebooting the system

2022-05-21T08:09:30Z

Executing reboot command several times on the machine "Dell PowerEdge R740", UEFI security detection stopped machine with the following prompt: UEFI0082: The system was reset due to a timeout from the watchdog timer. Check the System Event Log (SEL) or crash dumps from Operating Sysstem to identify the source that triggered the watchdog timer reset. Update the firmware or driver for the identified device. iDRAC has warning event: "The watchdog timer reset the system". This patch fixes this issue by adding the reboot notifier. Signed-off-by: Liu Xinpeng Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: wdat_wdt: Using the existing function to check parameter timeout

2022-05-21T08:09:29Z

If max_hw_heartbeat_ms is provided, the configured maximum timeout is not limited by it. The limit check in this driver therefore doesn't make much sense. Similar, the watchdog core ensures that minimum timeout limits are met if min_hw_heartbeat_ms is set. Using watchdog_timeout_invalid() makes more sense because it takes this into account. Signed-off-by: Liu Xinpeng Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/1650984810-6247-2-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: iTCO_wdt: Using existing macro define covers more scenarios

2022-05-21T08:09:28Z

For power management, SET_NOIRQ_SYSTEM_SLEEP_PM_OPS defined for CONFIG_PM_SLEEP, will point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same function. Vice versa happens for ->resume_noirq, ->thaw_noirq and ->restore_noirq. Signed-off-by: Liu Xinpeng Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/1650967905-3199-1-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking

2022-05-21T08:09:28Z

If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Miaoqian Lin Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220412070824.23708-1-linmq006@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck