linux-dev/fs/ocfs2/Makefile, branch master

ocfs2: improve ocfs2 Makefile

2018-12-28T20:11:45Z

Included file path was hard-wired in the ocfs2 makefile, which might causes some confusion when compiling ocfs2 as an external module. Say if we compile ocfs2 module as following. cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2 cd /other/dir/ocfs2 make -C /path/to/kernel_source M=`pwd` modules Acutally, the compiler wil try to find included file in /kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2. To fix this little bug, we introduce the var $(src) provided by kbuild. $(src) means the absolute path of the running kbuild file. Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.com Signed-off-by: Larry Chen Reviewed-by: Andrew Morton Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Joseph Qi Cc: Changwei Ge Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ocfs2: disable BUG assertions in reading blocks

2016-06-25T00:23:52Z

According to some high-load testing, these two BUG assertions were encountered, this led system panic. Actually, there were some discussions about removing these two BUG() assertions, it would not bring any side effect. Then, I did the the following changes, 1) use the existing macro CATCH_BH_JBD_RACES to wrap BUG() in the ocfs2_read_blocks_sync function like before. 2) disable the macro CATCH_BH_JBD_RACES in Makefile by default. Link: http://lkml.kernel.org/r/1466574294-26863-1-git-send-email-ghe@suse.com Signed-off-by: Gang He Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: sysfile interfaces for online file check

2016-03-22T22:36:02Z

Implement online file check sysfile interfaces, e.g. how to create the related sysfile according to device name, how to display/handle file check request from the sysfile. Signed-off-by: Gang He Reviewed-by: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: remove versioning information

2014-01-22T00:19:41Z

The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: Goldwyn Rodrigues Acked-by: Sunil Mushran Cc: Mark Fasheh Acked-by: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Ocfs2/move_extents: Add basic framework and source files for extent moving.

2011-05-25T07:17:08Z

Adding new files move_extents.[c|h] and fill it with nothing but only a context structure. Signed-off-by: Tristan Ye

fs: change to new flag variable

2011-03-17T13:02:57Z

Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y for cleaner conditional inclusion. Signed-off-by: matt mooney Acked-by: WANG Cong Signed-off-by: Michal Marek

ocfs2: allocation reservations

2010-05-06T01:17:30Z

This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh

ocfs2_dlmfs: Move to its own directory

2010-02-26T23:41:14Z

We're going to remove the tie between ocfs2_dlmfs and o2dlm. ocfs2_dlmfs doesn't belong in the fs/ocfs2/dlm directory anymore. Here we move it to fs/ocfs2/dlmfs. Signed-off-by: Joel Becker

ocfs2: Always include ACL support

2009-10-29T06:05:57Z

To become consistent with filesystems such as XFS or BTRFS, make posix ACLs always available. This also reduces possibility of misconfiguration on admin's side. Signed-off-by: Jan Kara Signed-off-by: Joel Becker