linux-dev/include/dt-bindings/iio, branch linus/master

dt-bindings: iio: add AD74413R

2021-12-12T17:09:11Z

The AD74412R and AD74413R are quad-channel, software configurable, input/output solutions for building and process control applications. They contain functionality for analog output, analog input, digital input, resistance temperature detector, and thermocouple measurements integrated into a single chip solution with an SPI interface. The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide four configurable input/output channels and a suite of diagnostic functions. The AD74413R differentiates itself from the AD74412R by being HART-compatible. Signed-off-by: Cosmin Tanislav Reviewed-by: Rob Herring Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20211205114045.173612-3-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry

2021-07-31T17:14:53Z

The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver. Leaving the rest untouched as it's ABI. Signed-off-by: Christophe Branchereau Reviewed-by: Paul Cercueil Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210726082033.351533-3-cbranchereau@gmail.com Signed-off-by: Jonathan Cameron

Merge branch 'ib-5.8-jz47xx-ts' into HEAD

2020-07-22T13:36:31Z

Immutable branch may be needed in input for a joystick set that is dependent on it.

dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC

2020-07-20T09:27:46Z

Introduce support for touchscreen channels found in JZ47xx SoCs. Signed-off-by: Artur Rojek Tested-by: Paul Cercueil Acked-by: Rob Herring Signed-off-by: Jonathan Cameron

iio: adc: Add PMIC7 ADC bindings

2020-06-14T10:49:18Z

Add documentation for PMIC7 ADC peripheral. For the PMIC7-type PMICs, ADC peripheral is present in HW for the following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. If SW needs to communicate with ADCs on other PMICs, it specifies the PMIC to PMK8350 through the newly added SID register and communication between PMK8350 ADC and other PMIC ADCs is carried out through PBS(Programmable Boot Sequence) at the firmware level. In addition, add definitions for ADC channels and virtual channel definitions (combination of ADC channel number and PMIC SID number) per PMIC, to be used by ADC clients for PMIC7. Signed-off-by: Jishnu Prakash Reviewed-by: Amit Kucheria Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron

dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC

2019-09-08T12:23:44Z

Introduce support for AUX2 channel found in ADC hardware present on Ingenic JZ4770 SoC. Signed-off-by: Artur Rojek Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron

dt-bindings: iio/temperature: Add thermocouple types (and doc)

2019-04-04T19:21:01Z

This patch introduces common thermocouple types used by various temperature sensors. Also a brief documentation explaining this "thermocouple-type" property. Signed-off-by: Patrick Havelange Signed-off-by: Jonathan Cameron

dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.

2019-02-09T15:39:24Z

Add device tree bindings for the ADC controller on JZ47xx SoCs, used by the ingenic-adc driver. Signed-off-by: Artur Rojek Signed-off-by: Jonathan Cameron

iio: adc: Update QCOM ADC license to SPDX format

2018-08-18T17:11:46Z

Update QCOM ADC header file to SPDX format. Signed-off-by: Siddartha Mohanadoss Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron

dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC

2018-08-03T21:37:03Z

PMIC5 ADC has support for clients to measure voltage and current on inputs connected to the PMIC. Clients include reading voltage phone power and on board system thermistors for thermal management. ADC5 on certain PMIC has support to read battery current. This change adds documentation. Signed-off-by: Siddartha Mohanadoss Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron