linux-dev/include/linux/mtd, branch master

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-10-08T15:56:37Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...

mtd: allow getting MTD device associated with a specific DT node

2022-09-24T12:54:37Z

MTD subsystem API allows interacting with MTD devices (e.g. reading, writing, handling bad blocks). So far a random driver could get MTD device only by its name (get_mtd_device_nm()). This change allows getting them also by a DT node. This API is required for drivers handling DT defined MTD partitions in a specific way (e.g. U-Boot (sub)partition with environment variables). Acked-by: Miquel Raynal Signed-off-by: Rafał Miłecki Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

mtd: add ECC error accounting for each read request

2022-09-21T08:38:09Z

Extend struct mtd_req_stats with two new fields holding the number of corrected bitflips and uncorrectable errors detected during a read operation. This is a prerequisite for ultimately passing those counters to user space, where they can be useful to applications for making better-informed choices about moving data around. Unlike 'max_bitflips' (which is set - in a common code path - to the return value of a function called while the MTD device's mutex is held), these counters have to be maintained in each MTD driver which defines the '_read_oob' callback because the statistics need to be calculated while the MTD device's mutex is held. Suggested-by: Boris Brezillon Signed-off-by: Michał Kępień Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-4-kernel@kempniu.pl

mtd: track maximum number of bitflips for each read request

2022-09-21T08:38:05Z

mtd_read_oob() callers are currently oblivious to the details of ECC errors detected during the read operation - they only learn (through the return value) whether any corrected bitflips or uncorrectable errors occurred. More detailed ECC information can be useful to user-space applications for making better-informed choices about moving data around. Extend struct mtd_oob_ops with a pointer to a newly-introduced struct mtd_req_stats and set its 'max_bitflips' field to the maximum number of bitflips found in a single ECC step during the read operation performed by mtd_read_oob(). This is a prerequisite for ultimately passing that value back to user space. Suggested-by: Boris Brezillon Signed-off-by: Michał Kępień Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-2-kernel@kempniu.pl

Merge tag 'spi-nor/for-5.20' into mtd/next

2022-08-01T19:31:22Z

SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups.

Merge remote-tracking branch 'korg_git/nand/next' into mtd/next

2022-08-01T19:24:54Z

mtd: spi-nor: s/addr_width/addr_nbytes

2022-07-28T02:11:56Z

Address width was an unfortunate name, as it means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR framework. Signed-off-by: Tudor Ambarus Reviewed-by: Michael Walle Acked-by: Pratyush Yadav Link: https://lore.kernel.org/r/20220725092505.446315-2-tudor.ambarus@microchip.com

mtd: hyperbus: Make hyperbus_unregister_device() return void

2022-06-09T13:06:13Z

The only thing that could theoretically fail in that function is mtd_device_unregister(). However it's not supposed to fail and when used correctly it doesn't. So wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-2-u.kleine-koenig@pengutronix.de

mtd: spinand: Add support for ATO25D1GA

2022-06-06T13:05:33Z

Add support for the ATO25D1GA SPI NAND flash. Datasheet: - https://atta.szlcsc.com/upload/public/pdf/source/20191212/C469320_04599D67B03B078044EB65FF5AEDDDE9.pdf Signed-off-by: Aidan MacDonald Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220604113250.4745-1-aidanmacdonald.0x0@gmail.com

Merge tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2022-05-24T21:31:29Z

Pull mtd updates from Miquel Raynal: "MTD core changes: - Call of_platform_populate() for MTD partitions - Check devicetree alias for index - mtdoops: - Add a timestamp to the mtdoops header. - Create a header structure for the saved mtdoops. - Fix the size of the header read buffer. - mtdblock: Warn if opened on NAND - Bindings: - reserved-memory: Support MTD/block device - jedec,spi-nor: remove unneeded properties - Extend fixed-partitions binding - Add Sercomm (Suzhou) Corporation vendor prefix MTD driver changes: - st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() - phram: - Allow cached mappings - Allow probing via reserved-memory - maps: ixp4xx: Drop driver - bcm47xxpart: Print correct offset on read error CFI driver changes: - Rename chip_ready variables - Add S29GL064N ID definition - Use chip_ready() for write on S29GL064N - Move and rename chip_check/chip_ready/chip_good_for_write NAND core changes: - Print offset instead of page number for bad blocks Raw NAND controller drivers: - Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() - CS553X: simplify the return expression of cs553x_write_ctrl_byte() - Davinci: Remove redundant unsigned comparison to zero - Denali: Use managed device resources - GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function - Intel: Fix possible null-ptr-deref in ebu_nand_probe() - MPC5121: Check before clk_disable_unprepare() not needed - Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module - OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible - Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly - Rockchip: Check before clk_disable_unprepare() not needed - TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: - Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: - Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG - XTX: Add support for XT26G0xA SPI NOR core changes: - Read back written SR value to make sure the write was done correctly. - Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. - Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. - Clarify rdsr dummy cycles documentation. - Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. - Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. - Rework Micron and Cypress Octal DTR enable methods to improve readability. - Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. - Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant" * tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits) mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() dt-bindings: mtd: partitions: Extend fixed-partitions binding dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix mtd: phram: Allow cached mappings mtd: call of_platform_populate() for MTD partitions mtd: rawnand: renesas: Use runtime PM instead of the raw clock API dt-bindings: mtd: renesas: Fix the NAND controller description mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte() mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4 mtd: spi-nor: debugfs: fix format specifier mtd: spi-nor: support eon en25qh256a variant mtd: spi-nor: winbond: add support for W25Q512NW-IM mtd: spi-nor: expose internal parameters via debugfs mtd: spi-nor: export spi_nor_hwcaps_pp2cmd() mtd: spi-nor: move spi_nor_write_ear() to winbond module mtd: spi-nor: amend the rdsr dummy cycles documentation mtd: cfi_cmdset_0002: Rename chip_ready variables ...