linux-dev/include/linux/spi/dw_spi.h, branch linus/master

spi/dw_spi: move dw_spi.h into drivers/spi

2011-03-18T16:26:52Z

include/linux/dw_spi.h only includes driver internal data. It doesn't expose a platform_data configuration structure or similar (at least nothing in-tree). This patch moves the header into drivers/spi so that the scope is limited to only the dw_spi_*.c driver files Signed-off-by: Grant Likely Cc: Feng Tang Cc: spi-devel-general@lists.sourceforge.net

spi/dw_spi: Fix missing header

2011-03-18T15:50:50Z

Currently, build on PPC dies with: In file included from drivers/spi/dw_spi_mmio.c:16: include/linux/spi/dw_spi.h:147: error: field ‘tx_sgl’ has incomplete type include/linux/spi/dw_spi.h:149: error: field ‘rx_sgl’ has incomplete type Add linux/scatterlist.h include to dw_spi.h, because we need to know the contents of the structure. Signed-off-by: Jiri Slaby Signed-off-by: Grant Likely

spi/dw_spi: add DMA support

2010-12-24T08:23:25Z

dw_spi driver in upstream only supports PIO mode, and this patch will support it to cowork with the Designware dma controller used on Intel Moorestown platform, at the same time it provides a general framework to support dw_spi core to cowork with dma controllers on other platforms It has been tested with a Option GTM501L 3G modem and Infenion 60x60 modem. To use DMA mode, DMA controller 2 of Moorestown has to be enabled Also change the dma interface suggested by Linus Walleij. Acked-by: Linus Walleij Signed-off-by: Feng Tang [Typo fix and renames to match intel_mid_dma renaming] Signed-off-by: Vinod Koul Signed-off-by: Alan Cox Signed-off-by: Grant Likely

spi/dw_spi: clean the cs_control code

2010-09-08T16:50:00Z

commit 052dc7c45i "spi/dw_spi: conditional transfer mode change" introduced cs_control code, which has a bug by using bit offset for spi mode to set transfer mode in control register. Also it forces devices who don't need cs_control to re-configure the control registers for each spi transfer. This patch will fix them Signed-off-by: Feng Tang Signed-off-by: Grant Likely

spi/dw_spi: enable platform specific chipselect.

2010-01-21T14:24:29Z

The driver core allows for a platform-specific chipselect assert/deassert function, however the chipselect function in the core doesn't take advantage of this fact. This enables the use of a custom function, should it be defined. Signed-off-by: George Shore Signed-off-by: Grant Likely

spi/dw_spi: refine the IRQ mode working flow

2010-01-20T20:49:45Z

Now dw_spi core fully supports 3 transfer modes: pure polling, DMA and IRQ mode. IRQ mode will use the FIFO half empty as the IRQ trigger, so each interface driver need set the fifo_len, so that core driver can handle it properly Signed-off-by: Feng Tang Signed-off-by: Grant Likely

spi: controller driver for Designware SPI core

2009-12-17T15:39:13Z

Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang Cc: David Brownell Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Grant Likely