linux-dev/include/soc/mscc, branch master

net: dsa: felix: add support for changing DSA master

2022-09-20T08:32:36Z

Changing the DSA master means different things depending on the tagging protocol in use. For NPI mode ("ocelot" and "seville"), there is a single port which can be configured as NPI, but DSA only permits changing the CPU port affinity of user ports one by one. So changing a user port to a different NPI port globally changes what the NPI port is, and breaks the user ports still using the old one. To address this while still permitting the change of the NPI port, require that the user ports which are still affine to the old NPI port are down, and cannot be brought up until they are all affine to the same NPI port. The tag_8021q mode ("ocelot-8021q") is more flexible, in that each user port can be freely assigned to one CPU port or to the other. This works by filtering host addresses towards both tag_8021q CPU ports, and then restricting the forwarding from a certain user port only to one of the two tag_8021q CPU ports. Additionally, the 2 tag_8021q CPU ports can be placed in a LAG. This works by enabling forwarding via PGID_SRC from a certain user port towards the logical port ID containing both tag_8021q CPU ports, but then restricting forwarding per packet, via the LAG hash codes in PGID_AGGR, to either one or the other. When we change the DSA master to a LAG device, DSA guarantees us that the LAG has at least one lower interface as a physical DSA master. But DSA masters can come and go as lowers of that LAG, and ds->ops->port_change_master() will not get called, because the DSA master is still the same (the LAG). So we need to hook into the ds->ops->port_lag_{join,leave} calls on the CPU ports and update the logical port ID of the LAG that user ports are assigned to. Signed-off-by: Vladimir Oltean Signed-off-by: Paolo Abeni

net: dsa: propagate extack to port_lag_join

2022-09-20T08:32:36Z

Drivers could refuse to offload a LAG configuration for a variety of reasons, mainly having to do with its TX type. Additionally, since DSA masters may now also be LAG interfaces, and this will translate into a call to port_lag_join on the CPU ports, there may be extra restrictions there. Propagate the netlink extack to this DSA method in order for drivers to give a meaningful error message back to the user. Signed-off-by: Vladimir Oltean Signed-off-by: Paolo Abeni

net: mscc: ocelot: share the common stat definitions between all drivers

2022-09-09T09:59:12Z

All switch families supported by the ocelot lib (ocelot, felix, seville) export the same registers so far. But for example felix also has TSN counters, while the others don't. To reduce the bloat even further, create an OCELOT_COMMON_STATS() macro which just lists all stats that are common between switches. The array elements are still replicated among all of vsc9959_stats_layout, vsc9953_stats_layout and ocelot_stats_layout. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: minimize definitions for stats

2022-09-09T09:59:12Z

The current definition of struct ocelot_stat_layout is long-winded (4 lines per entry, and we have hundreds of entries), so we could make an effort to use the C preprocessor and reduce the line count. Create an implicit correspondence between enum ocelot_reg, which tells us the register address (SYS_COUNT_RX_OCTETS etc) and enum ocelot_stat which allows us to index the ocelot->stats array (OCELOT_STAT_RX_OCTETS etc), and don't require us to specify both when we define what stats each switch family has. Create an OCELOT_STAT() macro that pairs only an enum ocelot_stat to an enum ocelot_reg, and an OCELOT_STAT_ETHTOOL() macro which also contains a name exported to the unstructured ethtool -S stringset API. For now, we define all counters as having the OCELOT_STAT_ETHTOOL() kind, but we will add more counters in the future which are not exported to the unstructured ethtool -S. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: harmonize names of SYS_COUNT_TX_AGING and OCELOT_STAT_TX_AGED

2022-09-09T09:59:12Z

The hardware counter is called C_TX_AGED, so rename SYS_COUNT_TX_AGING to SYS_COUNT_TX_AGED. This will become important since we want to minimize the way in which we declare struct ocelot_stat_layout elements, using the C preprocessor. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: add support for all sorts of standardized counters present in DSA

2022-09-09T09:59:12Z

DSA is integrated with the new standardized ethtool -S --groups option, but the felix driver only exports unstructured statistics. Reuse the array of 64-bit statistics collected by ocelot_check_stats_work(), but just export select values from it. Since ocelot_check_stats_work() runs periodically to avoid 32-bit overflow, and the ethtool calling context is sleepable, we update the 64-bit stats one more time, to provide up-to-date values. The locking scheme with a mutex followed by a spinlock is a bit hard to digest, so we create and use a ocelot_port_stats_run() helper with a callback that populates the ethool stats group the caller is interested in. The exported stats are: ethtool -S swp0 --groups eth-phy ethtool -S swp0 --groups eth-mac ethtool -S swp0 --groups eth-ctrl ethtool -S swp0 --groups rmon ethtool --include-statistics --show-pause swp0 Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: felix: use ocelot's ndo_get_stats64 method

2022-09-09T09:59:12Z

Move the logic from the ocelot switchdev driver's ocelot_get_stats64() method to the common switch lib and reuse it for the DSA driver. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: felix: check the 32-bit PSFP stats against overflow

2022-09-09T09:59:12Z

The Felix PSFP counters suffer from the same problem as the ocelot ndo_get_stats64 ones - they are 32-bit, so they can easily overflow and this can easily go undetected. Add a custom hook in ocelot_check_stats_work() through which driver specific actions can be taken, and update the stats for the existing PSFP filters from that hook. Previously, vsc9959_psfp_filter_add() and vsc9959_psfp_filter_del() were serialized with respect to each other via rtnl_lock(). However, with the new entry point into &psfp->sfi_list coming from the periodic worker, we now need an explicit mutex to serialize access to these lists. We used to keep a struct felix_stream_filter_counters on stack, through which vsc9959_psfp_stats_get() - a FLOW_CLS_STATS callback - would retrieve data from vsc9959_psfp_counters_get(). We need to become smarter about that in 3 ways: - we need to keep a persistent set of counters for each stream instead of keeping them on stack - we need to promote those counters from u32 to u64, and create a procedure that properly keeps 64-bit counters. Since we clear the hardware counters anyway, and we poll every 2 seconds, a simple increment of a u64 counter with a u32 value will perfectly do the job. - FLOW_CLS_STATS also expect incremental counters, so we also need to zeroize our u64 counters every time sch_flower calls us Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: make access to STAT_VIEW sleepable again

2022-09-09T09:59:12Z

To support SPI-controlled switches in the future, access to SYS_STAT_CFG_STAT_VIEW needs to be done outside of any spinlock protected region, but it still needs to be serialized (by a mutex). Split the ocelot->stats_lock spinlock into a mutex that serializes indirect access to hardware registers (ocelot->stat_view_lock) and a spinlock that serializes access to the u64 ocelot->stats array. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: felix: add definitions for the stream filter counters

2022-09-09T09:59:11Z

TSN stream (802.1Qci, 802.1CB) filters are also accessed through STAT_VIEW, just like the port registers, but these counters are per stream, rather than per port. So we don't keep them in ocelot_port_update_stats(). What we can do, however, is we can create register definitions for them just like we have for the port counters, and delete the last remaining user of the SYS_CNT register + a group index (read_gix). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller