linux-dev/include/trace/events/btrfs.h, branch linus/master

Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2022-05-26T19:32:41Z

Pull MM updates from Andrew Morton: "Almost all of MM here. A few things are still getting finished off, reviewed, etc. - Yang Shi has improved the behaviour of khugepaged collapsing of readonly file-backed transparent hugepages. - Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. - Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. - Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. - Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. - David Vernet has done some fixup work on the memcg selftests. - Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. - More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. - Nadav Amit has done some optimization of TLB flushing during mprotect(). - Neil Brown continues to labor away at improving our swap-over-NFS support. - David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). - Peng Liu fixed some errors in the core hugetlb code. - Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. - Some cleanups of the arch-specific pagemap code from Anshuman Khandual. - Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. - Roman Gushchin has done more work on the memcg selftests. ... and, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin" * tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits) mm: kfence: use PAGE_ALIGNED helper selftests: vm: add the "settings" file with timeout variable selftests: vm: add "test_hmm.sh" to TEST_FILES selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests selftests: vm: add migration to the .gitignore selftests/vm/pkeys: fix typo in comment ksm: fix typo in comment selftests: vm: add process_mrelease tests Revert "mm/vmscan: never demote for memcg reclaim" mm/kfence: print disabling or re-enabling message include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace" include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion" mm: fix a potential infinite loop in start_isolate_page_range() MAINTAINERS: add Muchun as co-maintainer for HugeTLB zram: fix Kconfig dependency warning mm/shmem: fix shmem folio swapoff hang cgroup: fix an error handling path in alloc_pagecache_max_30M() mm: damon: use HPAGE_PMD_SIZE tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate nodemask.h: fix compilation error with GCC12 ...

btrfs: simplify WQ_HIGHPRI handling in struct btrfs_workqueue

2022-05-16T15:03:15Z

Just let the one caller that wants optional WQ_HIGHPRI handling allocate a separate btrfs_workqueue for that. This allows to rename struct __btrfs_workqueue to btrfs_workqueue, remove a pointer indirection and separate allocation for all btrfs_workqueue users and generally simplify the code. Reviewed-by: Qu Wenruo Signed-off-by: Christoph Hellwig Reviewed-by: David Sterba Signed-off-by: David Sterba

tracing: incorrect gfp_t conversion

2022-05-13T14:20:18Z

Fixes the following sparse warnings: include/trace/events/*: sparse: cast to restricted gfp_t include/trace/events/*: sparse: restricted gfp_t degrades to integer gfp_t type is bitwise and requires __force attributes for any casts. Link: https://lkml.kernel.org/r/331d88fe-f4f7-657c-02a2-d977f15fbff6@openvz.org Signed-off-by: Vasily Averin Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Andrew Morton

btrfs: add code to support the block group root

2022-03-14T12:13:48Z

This code adds the on disk structures for the block group root, which will hold the block group items for extent tree v2. Signed-off-by: Josef Bacik Signed-off-by: David Sterba

btrfs: pass fs_info to trace_btrfs_transaction_commit

2022-01-03T14:09:47Z

The root on the trans->root can be anything, and generally we're committing from the transaction kthread so it's usually the tree_root. Change this to just take an fs_info, and to maintain compatibility simply put the ROOT_TREE_OBJECTID as the root objectid for the tracepoint. This will allow use to remove trans->root. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba

btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc

2021-08-23T11:19:07Z

We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov Signed-off-by: Josef Bacik Signed-off-by: David Sterba

btrfs: enable a tracepoint when we fail tickets

2021-08-23T11:19:06Z

When debugging early enospc problems it was useful to have a tracepoint where we failed all tickets so I could check the state of the enospc counters at failure time to validate my fixes. This adds the tracpoint so you can easily get that information. Reviewed-by: Nikolay Borisov Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba

btrfs: include delalloc related info in dump space info tracepoint

2021-08-23T11:19:06Z

In order to debug delalloc flushing issues I added delalloc_bytes and ordered_bytes to this tracepoint to see if they were non-zero when we were going ENOSPC. This was valuable for me and showed me cases where we weren't waiting on ordered extents properly. In order to add this to the tracepoint we need to take away the const modifier for fs_info, as percpu_sum_counter_positive() will change the counter when it adds up the percpu buckets. This is needed to make sure we're getting accurate information at these tracepoints, as the wrong information could send us down the wrong path when debugging problems. Reviewed-by: Nikolay Borisov Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba

Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2021-07-03T18:13:22Z

Pull tracing updates from Steven Rostedt: - Added option for per CPU threads to the hwlat tracer - Have hwlat tracer handle hotplug CPUs - New tracer: osnoise, that detects latency caused by interrupts, softirqs and scheduling of other tasks. - Added timerlat tracer that creates a thread and measures in detail what sources of latency it has for wake ups. - Removed the "success" field of the sched_wakeup trace event. This has been hardcoded as "1" since 2015, no tooling should be looking at it now. If one exists, we can revert this commit, fix that tool and try to remove it again in the future. - tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids. - New boot command line option "tp_printk_stop", as tp_printk causes trace events to write to console. When user space starts, this can easily live lock the system. Having a boot option to stop just after boot up is useful to prevent that from happening. - Have ftrace_dump_on_oops boot command line option take numbers that match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops. - Bootconfig clean ups, fixes and enhancements. - New ktest script that tests bootconfig options. - Add tracepoint_probe_register_may_exist() to register a tracepoint without triggering a WARN*() if it already exists. BPF has a path from user space that can do this. All other paths are considered a bug. - Small clean ups and fixes * tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits) tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT tracing: Simplify & fix saved_tgids logic treewide: Add missing semicolons to __assign_str uses tracing: Change variable type as bool for clean-up trace/timerlat: Fix indentation on timerlat_main() trace/osnoise: Make 'noise' variable s64 in run_osnoise() tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing tracing: Fix spelling in osnoise tracer "interferences" -> "interference" Documentation: Fix a typo on trace/osnoise-tracer trace/osnoise: Fix return value on osnoise_init_hotplug_support trace/osnoise: Make interval u64 on osnoise_main trace/osnoise: Fix 'no previous prototype' warnings tracing: Have osnoise_main() add a quiescent state for task rcu seq_buf: Make trace_seq_putmem_hex() support data longer than 8 seq_buf: Fix overflow in seq_buf_putmem_hex() trace/osnoise: Support hotplug operations trace/hwlat: Support hotplug operations trace/hwlat: Protect kdata->kthread with get/put_online_cpus trace: Add timerlat tracer trace: Add osnoise tracer ...

treewide: Add missing semicolons to __assign_str uses

2021-06-30T13:19:14Z

The __assign_str macro has an unusual ending semicolon but the vast majority of uses of the macro already have semicolon termination. $ git grep -P '\b__assign_str\b' | wc -l 551 $ git grep -P '\b__assign_str\b.*;' | wc -l 480 Add semicolons to the __assign_str() uses without semicolon termination and all the other uses without semicolon termination via additional defines that are equivalent to __assign_str() with the eventual goal of removing the semicolon from the __assign_str() macro definition. Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/ Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com Signed-off-by: Joe Perches Signed-off-by: Steven Rostedt (VMware)