linux-dev/net/bluetooth/rfcomm, branch linus/master

Merge tag 'for-net-next-2021-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

2021-10-05T14:41:16Z

Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for MediaTek MT7922 and MT7921 - Enable support for AOSP extention in Qualcomm WCN399x and Realtek 8822C/8852A. - Add initial support for link quality and audio/codec offload. - Rework of sockets sendmsg to avoid locking issues. - Add vhci suspend/resume emulation. ==================== Link: https://lore.kernel.org/r/20211001230850.3635543-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski

Bluetooth: Fix passing NULL to PTR_ERR

2021-09-21T08:44:52Z

Passing NULL to PTR_ERR will result in 0 (success), also since the likes of bt_skb_sendmsg does never return NULL it is safe to replace the instances of IS_ERR_OR_NULL with IS_ERR when checking its return. Reported-by: Dan Carpenter Tested-by: Tedd Ho-Jeong An Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann

Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg

2021-09-13T19:53:23Z

This makes use of bt_skb_sendmmsg instead using memcpy_from_msg which is not considered safe to be used when lock_sock is held. Also make rfcomm_dlc_send handle skb with fragments and queue them all atomically. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann

Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-09-01T16:51:16Z

Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...

Bluetooth: switch to lock_sock in RFCOMM

2021-08-10T17:40:48Z

Other than rfcomm_sk_state_change and rfcomm_connect_ind, functions in RFCOMM use lock_sock to lock the socket. Since bh_lock_sock and spin_lock_bh do not provide synchronization with lock_sock, these calls should be changed to lock_sock. This is now safe to do because packet processing is now done in a workqueue instead of a tasklet, so bh_lock_sock/spin_lock_bh are no longer necessary to synchronise between user contexts and SOFTIRQ processing. Signed-off-by: Desmond Cheong Zhi Xi Signed-off-by: Luiz Augusto von Dentz

tty: drop put_tty_driver

2021-07-27T10:17:21Z

put_tty_driver() is an alias for tty_driver_kref_put(). There is no need for two exported identical functions, therefore switch all users of old put_tty_driver() to new tty_driver_kref_put() and remove the former for good. Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Chris Zankel Cc: Max Filippov Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Jiri Slaby Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Oliver Neukum Cc: Felipe Balbi Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Acked-by: Alex Elder Acked-by: Christian Borntraeger Acked-by: Max Filippov Acked-by: David Sterba Acked-by: Samuel Iglesias Gonsálvez Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: stop using alloc_tty_driver

2021-07-27T10:17:20Z

alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson (odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Chris Zankel Cc: Max Filippov Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Oliver Neukum Cc: Felipe Balbi Cc: Johan Hovold Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Acked-by: Samuel Iglesias Gonsálvez Acked-by: Max Filippov Acked-by: David Sterba Acked-by: Christian Borntraeger Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-07-05T21:08:24Z

Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...

Bluetooth: RFCOMM: Use DEVICE_ATTR_RO macro

2021-06-26T05:12:33Z

Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing Signed-off-by: Marcel Holtmann

tty: make tty_operations::chars_in_buffer return uint

2021-05-13T16:29:11Z

tty_operations::chars_in_buffer is another hook which is expected to return values >= 0. So make it explicit by the return type too -- use unsigned int. Signed-off-by: Jiri Slaby Acked-By: Anton Ivanov Acked-by: David Sterba Cc: Jeff Dike Cc: Richard Weinberger Cc: Arnd Bergmann Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Jiri Kosina Cc: Shawn Guo Cc: Sascha Hauer Cc: Oliver Neukum Cc: Felipe Balbi Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman