<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-dev/net/bluetooth/smp.c, branch linus/master</title>
<subtitle>Linux kernel development work - see feature branches</subtitle>
<id>https://git.zx2c4.com/linux-dev/atom/net/bluetooth/smp.c?h=linus%2Fmaster</id>
<link rel='self' href='https://git.zx2c4.com/linux-dev/atom/net/bluetooth/smp.c?h=linus%2Fmaster'/>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/'/>
<updated>2021-06-26T05:12:43Z</updated>
<entry>
<title>Bluetooth: use inclusive language in HCI role comments</title>
<updated>2021-06-26T05:12:43Z</updated>
<author>
<name>Archie Pusaka</name>
<email>apusaka@chromium.org</email>
</author>
<published>2021-06-04T08:26:25Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=74be523ce6bed0531e4f31c3e1387909589e9bfe'/>
<id>urn:sha1:74be523ce6bed0531e4f31c3e1387909589e9bfe</id>
<content type='text'>
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -&gt; initiator (for smp) or central (everything else)
slave  -&gt; responder (for smp) or peripheral (everything else)

The #define preprocessor terms are unchanged for now to not disturb
dependent APIs.

Signed-off-by: Archie Pusaka &lt;apusaka@chromium.org&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: smp: Use the correct print format</title>
<updated>2021-06-26T05:12:43Z</updated>
<author>
<name>Kai Ye</name>
<email>yekai13@huawei.com</email>
</author>
<published>2021-06-03T07:41:05Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=83b4b19551411c83bbcf677718ab5d9f60d982f6'/>
<id>urn:sha1:83b4b19551411c83bbcf677718ab5d9f60d982f6</id>
<content type='text'>
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.

Signed-off-by: Kai Ye &lt;yekai13@huawei.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: use inclusive language in SMP</title>
<updated>2021-06-26T05:12:37Z</updated>
<author>
<name>Archie Pusaka</name>
<email>apusaka@chromium.org</email>
</author>
<published>2021-05-31T08:37:25Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=fad646e16d3cafd67d3cfff8e66f77401190957e'/>
<id>urn:sha1:fad646e16d3cafd67d3cfff8e66f77401190957e</id>
<content type='text'>
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -&gt; initiator
slave  -&gt; responder

Signed-off-by: Archie Pusaka &lt;apusaka@chromium.org&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net</title>
<updated>2021-06-19T02:47:02Z</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2021-06-19T02:47:02Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=adc2e56ebe6377f5c032d96aee0feac30a640453'/>
<id>urn:sha1:adc2e56ebe6377f5c032d96aee0feac30a640453</id>
<content type='text'>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh

scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.

Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: SMP: Fix crash when receiving new connection when debug is enabled</title>
<updated>2021-06-14T20:16:27Z</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2021-06-14T17:46:44Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=995fca15b73ff8f92888cc2d5d95f17ffdac74ba'/>
<id>urn:sha1:995fca15b73ff8f92888cc2d5d95f17ffdac74ba</id>
<content type='text'>
When receiving a new connection pchan-&gt;conn won't be initialized so the
code cannot use bt_dev_dbg as the pointer to hci_dev won't be
accessible.

Fixes: 2e1614f7d61e4 ("Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: Fix spelling mistakes</title>
<updated>2021-06-02T21:01:55Z</updated>
<author>
<name>Zheng Yongjun</name>
<email>zhengyongjun3@huawei.com</email>
</author>
<published>2021-06-02T06:54:58Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=91641b79e1e1538eed5dac1a00770c2b94e07a33'/>
<id>urn:sha1:91641b79e1e1538eed5dac1a00770c2b94e07a33</id>
<content type='text'>
Fix some spelling mistakes in comments:
udpate  ==&gt; update
retreive  ==&gt; retrieve
accidentially  ==&gt; accidentally
correspondig  ==&gt; corresponding
adddress  ==&gt; address
estabilish  ==&gt; establish
commplete  ==&gt; complete
Unkown  ==&gt; Unknown
triggerd  ==&gt; triggered
transtion  ==&gt; transition

Signed-off-by: Zheng Yongjun &lt;zhengyongjun3@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2021-04-29T18:57:23Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-04-29T18:57:23Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=9d31d2338950293ec19d9b095fbaa9030899dcb4'/>
<id>urn:sha1:9d31d2338950293ec19d9b095fbaa9030899dcb4</id>
<content type='text'>
Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx-&gt;xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
</content>
</entry>
<entry>
<title>Bluetooth: SMP: Fix variable dereferenced before check 'conn'</title>
<updated>2021-04-02T09:09:12Z</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2021-03-29T17:27:04Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=0ae8ef674eb391d5a832967eb03cfe06904b31d0'/>
<id>urn:sha1:0ae8ef674eb391d5a832967eb03cfe06904b31d0</id>
<content type='text'>
This fixes kbuild findings:

smatch warnings:
net/bluetooth/smp.c:1633 smp_user_confirm_reply() warn: variable
dereferenced before check 'conn' (see line 1631)

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Reported-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: Remove trailing semicolon in macros</title>
<updated>2021-03-23T15:05:35Z</updated>
<author>
<name>Meng Yu</name>
<email>yumeng18@huawei.com</email>
</author>
<published>2021-03-23T06:22:56Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=c29fb5f65072b784717ca16d6f136461d2ee04c4'/>
<id>urn:sha1:c29fb5f65072b784717ca16d6f136461d2ee04c4</id>
<content type='text'>
remove trailing semicolon in macros and coding style fix.

Signed-off-by: Meng Yu &lt;yumeng18@huawei.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
<entry>
<title>Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg</title>
<updated>2021-03-15T20:42:25Z</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2021-03-15T21:39:29Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=2e1614f7d61e407f1a8e7935a2903a6fa3cb0b11'/>
<id>urn:sha1:2e1614f7d61e407f1a8e7935a2903a6fa3cb0b11</id>
<content type='text'>
This converts instances of BT_ERR and BT_DBG to bt_dev_err and
bt_dev_dbg which can be enabled at runtime when BT_FEATURE_DEBUG is
enabled.

Note: Not all instances could be converted as some are exercised by
selftest.

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
</content>
</entry>
</feed>
