linux-dev/net/bridge, branch master

bridge: Fix flushing of dynamic FDB entries

2022-11-03T03:47:09Z

The following commands should result in all the dynamic FDB entries being flushed, but instead all the non-local (non-permanent) entries are flushed: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent This is because br_fdb_flush() works with FDB flags and not the corresponding enumerator values. Fix by passing the FDB flag instead. After the fix: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:aa:bb:cc:dd:ee master br0 static 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing") Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski

net: bridge: assign path_cost for 2.5G and 5G link speed

2022-09-30T11:35:29Z

As 2.5G, 5G ethernet ports are more common and affordable, these ports are being used in LAN bridge devices. STP port_cost() is missing path_cost assignment for these link speeds, causes highest cost 100 being used. This result in lower speed port being picked when there is loop between 5G and 1G ports. Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100 Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100 speed greater than 10G = 1 Signed-off-by: Steven Hsieh Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10Z

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski

netfilter: ebtables: fix memory leak when blob is malformed

2022-09-20T21:50:03Z

The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-08T16:38:30Z

drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni

netfilter: br_netfilter: Drop dst references before setting.

2022-08-31T10:12:32Z

The IPv6 path already drops dst in the daddr changed case, but the IPv4 path does not. This change makes the two code paths consistent. Further, it is possible that there is already a metadata_dst allocated from ingress that might already be attached to skbuff->dst while following the bridge path. If it is not released before setting a new metadata_dst, it will be leaked. This is similar to what is done in bpf_set_tunnel_key() or ip6_route_input(). It is important to note that the memory being leaked is not the dst being set in the bridge code, but rather memory allocated from some other code path that is not being freed correctly before the skb dst is overwritten. An example of the leakage fixed by this commit found using kmemleak: unreferenced object 0xffff888010112b00 (size 256): comm "softirq", pid 0, jiffies 4294762496 (age 32.012s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................ e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N.............. backtrace: [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0 [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0 [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0 [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560 [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90 [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230 [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0 [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0 [<00000000a879497d>] process_backlog+0x93/0x190 [<00000000e41ade9f>] __napi_poll+0x28/0x170 [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0 [<00000000b20dd5d4>] __do_softirq+0xf4/0x305 [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140 [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0 [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [<000000008942add0>] native_safe_halt+0x13/0x20 Florian Westphal says: "Original code was likely fine because nothing ever did set a skb->dst entry earlier than bridge in those days." Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Harsh Modi Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-08-25T23:07:42Z

drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski

netfilter: ebtables: reject blobs that don't provide all entry points

2022-08-23T16:23:15Z

Harshit Mogalapalli says: In ebt_do_table() function dereferencing 'private->hook_entry[hook]' can lead to NULL pointer dereference. [..] Kernel panic: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [..] RIP: 0010:ebt_do_table+0x1dc/0x1ce0 Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88 [..] Call Trace: nf_hook_slow+0xb1/0x170 __br_forward+0x289/0x730 maybe_deliver+0x24b/0x380 br_flood+0xc6/0x390 br_dev_xmit+0xa2e/0x12c0 For some reason ebtables rejects blobs that provide entry points that are not supported by the table, but what it should instead reject is the opposite: blobs that DO NOT provide an entry point supported by the table. t->valid_hooks is the bitmask of hooks (input, forward ...) that will see packets. Providing an entry point that is not support is harmless (never called/used), but the inverse isn't: it results in a crash because the ebtables traverser doesn't expect a NULL blob for a location its receiving packets for. Instead of fixing all the individual checks, do what iptables is doing and reject all blobs that differ from the expected hooks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Harshit Mogalapalli Reported-by: syzkaller Signed-off-by: Florian Westphal

net: bridge: move DSA master bridging restriction to DSA

2022-08-23T09:39:22Z

When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Nikolay Aleksandrov Signed-off-by: Paolo Abeni

bridge: move from strlcpy with unused retval to strscpy

2022-08-23T00:57:30Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20220818210212.8347-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski