linux-dev/net/can/raw.c, branch linus/master

can: raw: add support for SO_TXTIME/SCM_TXTIME

2022-05-16T20:03:45Z

This patch calls into sock_cmsg_send() to parse the user supplied control information into a struct sockcm_cookie. Then assign the requested transmit time to the skb. This makes it possible to use the Earliest TXTIME First (ETF) packet scheduler with the CAN_RAW protocol. The user can send a CAN_RAW frame with a TXTIME and the kernel (with the ETF scheduler) will take care of sending it to the network interface. Link: https://lore.kernel.org/all/20220502091946.1916211-3-mkl@pengutronix.de Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: raw: raw_sendmsg(): remove not needed setting of skb->sk

2022-05-16T20:03:45Z

The skb in raw_sendmsg() is allocated with sock_alloc_send_skb(), which subsequently calls sock_alloc_send_pskb() -> skb_set_owner_w(), which assigns "skb->sk = sk". This patch removes the not needed setting of skb->sk. Link: https://lore.kernel.org/all/20220502091946.1916211-2-mkl@pengutronix.de Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

net: SO_RCVMARK socket option for SO_MARK with recvmsg()

2022-04-28T20:08:15Z

Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK should be included in the ancillary data returned by recvmsg(). Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs(). Signed-off-by: Erin MacNeil Reviewed-by: Eric Dumazet Reviewed-by: David Ahern Acked-by: Marc Kleine-Budde Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com Signed-off-by: Jakub Kicinski

net: remove noblock parameter from skb_recv_datagram()

2022-04-06T12:45:26Z

skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller

net: Remove redundant if statements

2021-08-05T12:27:50Z

The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Yajun Deng Signed-off-by: David S. Miller

can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF

2021-07-24T17:00:14Z

We get a bug during ltp can_filter test as following. =========================================== [60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0 [60919.265443] Oops: 0000 [#1] SMP PTI [60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1 [60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200 [60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246 [60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007 [60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30 [60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001 [60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30 [60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000 [60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000 [60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000 [60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0 [60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [60919.451608] PKRU: 55555554 [60919.463622] Call Trace: [60919.475617] [60919.487122] ? update_load_avg+0x89/0x5d0 [60919.498478] ? update_load_avg+0x89/0x5d0 [60919.509822] ? account_entity_enqueue+0xc5/0xf0 [60919.520709] security_sock_rcv_skb+0x2a/0x40 [60919.531413] sk_filter_trim_cap+0x47/0x1b0 [60919.542178] ? kmem_cache_alloc+0x38/0x1b0 [60919.552444] sock_queue_rcv_skb+0x17/0x30 [60919.562477] raw_rcv+0x110/0x190 [can_raw] [60919.572539] can_rcv_filter+0xbc/0x1b0 [can] [60919.582173] can_receive+0x6b/0xb0 [can] [60919.591595] can_rcv+0x31/0x70 [can] [60919.600783] __netif_receive_skb_one_core+0x5a/0x80 [60919.609864] process_backlog+0x9b/0x150 [60919.618691] net_rx_action+0x156/0x400 [60919.627310] ? sched_clock_cpu+0xc/0xa0 [60919.635714] __do_softirq+0xe8/0x2e9 [60919.644161] do_softirq_own_stack+0x2a/0x40 [60919.652154] [60919.659899] do_softirq.part.17+0x4f/0x60 [60919.667475] __local_bh_enable_ip+0x60/0x70 [60919.675089] __dev_queue_xmit+0x539/0x920 [60919.682267] ? finish_wait+0x80/0x80 [60919.689218] ? finish_wait+0x80/0x80 [60919.695886] ? sock_alloc_send_pskb+0x211/0x230 [60919.702395] ? can_send+0xe5/0x1f0 [can] [60919.708882] can_send+0xe5/0x1f0 [can] [60919.715037] raw_sendmsg+0x16d/0x268 [can_raw] It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following. cpu0 cpu1 raw_bind raw_setsockopt unregister_netdevice_many unlist_netdevice dev_get_by_index raw_notifier raw_enable_filters ...... can_rx_register can_rcv_list_find(..., net->can.rx_alldev_list) ...... sock_close raw_release(sock_a) ...... can_receive can_rcv_filter(net->can.rx_alldev_list, ...) raw_rcv(skb, sock_a) BUG After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered. We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt(). Fixes: c18ce101f2e4 ("[CAN]: Add raw protocol") Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com Cc: linux-stable Signed-off-by: Ziyang Xuan Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

net: sock: introduce sk_error_report

2021-06-29T18:28:21Z

This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller

can: bcm/raw/isotp: use per module netdevice notifier

2021-06-16T10:52:18Z

syzbot is reporting hung task at register_netdevice_notifier() [1] and unregister_netdevice_notifier() [2], for cleanup_net() might perform time consuming operations while CAN driver's raw/bcm/isotp modules are calling {register,unregister}_netdevice_notifier() on each socket. Change raw/bcm/isotp modules to call register_netdevice_notifier() from module's __init function and call unregister_netdevice_notifier() from module's __exit function, as with gw/j1939 modules are doing. Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1] Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2] Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp Cc: linux-stable Reported-by: syzbot Reported-by: syzbot Reviewed-by: Kirill Tkhai Tested-by: syzbot Tested-by: Oliver Hartkopp Signed-off-by: Tetsuo Handa Signed-off-by: Marc Kleine-Budde

can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZE

2021-03-29T07:51:20Z

Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") Reported-by: Richard Weinberger Tested-by: Richard Weinberger Acked-by: Kurt Van Dijck Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: raw: return -ERANGE when filterset does not fit into user space buffer

2021-01-06T14:15:41Z

Multiple filters (struct can_filter) can be set with the setsockopt() function, which was originally intended as a write-only operation. As getsockopt() also provides a CAN_RAW_FILTER option to read back the given filters, the caller has to provide an appropriate user space buffer. In the case this buffer is too small the getsockopt() silently truncates the filter information and gives no information about the needed space. This is safe but not convenient for the programmer. In net/core/sock.c the SO_PEERGROUPS sockopt had a similar requirement and solved it by returning -ERANGE in the case that the provided data does not fit into the given user space buffer and fills the required size into optlen, so that the caller can retry with a matching buffer length. This patch adopts this approach for CAN_RAW_FILTER getsockopt(). Reported-by: Phillip Schichtel Signed-off-by: Oliver Hartkopp Tested-By: Phillip Schichtel Link: https://lore.kernel.org/r/20201216174928.21663-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde