linux-dev/net/dsa/Kconfig, branch master

net: dsa: tag_ksz: add tag handling for Microchip LAN937x

2022-07-02T15:34:05Z

The Microchip LAN937X switches have a tagging protocol which is very similar to KSZ tagging. So that the implementation is added to tag_ksz.c and reused common APIs Signed-off-by: Prasanna Vengateshan Signed-off-by: Arun Ramadoss Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: add Renesas RZ/N1 switch tag driver

2022-06-27T10:37:55Z

The switch that is present on the Renesas RZ/N1 SoC uses a specific VLAN value followed by 6 bytes which contains forwarding configuration. Signed-off-by: Clément Léger Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag

2021-10-18T13:02:56Z

This commit implements a basic version of the 8 byte tag protocol used in the Realtek RTL8365MB-VC unmanaged switch, which carries with it a protocol version of 0x04. The implementation itself only handles the parsing of the EtherType value and Realtek protocol version, together with the source or destination port fields. The rest is left unimplemented for now. The tag format is described in a confidential document provided to my company by Realtek Semiconductor Corp. Permission has been granted by the vendor to publish this driver based on that material, together with an extract from the document describing the tag format and its fields. It is hoped that this will help future implementors who do not have access to the material but who wish to extend the functionality of drivers for chips which use this protocol. In addition, two possible values of the REASON field are specified, based on experiments on my end. Realtek does not specify what value this field can take. Signed-off-by: Alvin Šipraga Reviewed-by: Vladimir Oltean Reviewed-by: Linus Walleij Reviewed-by: Florian Fainelli Tested-by: Arınç ÜNAL Signed-off-by: David S. Miller

net: dsa: move NET_DSA_TAG_RTL4_A to right place in Kconfig/Makefile

2021-10-18T13:02:55Z

Move things around a little so that this tag driver is alphabetically ordered. The Kconfig file is sorted based on the tristate text. Suggested-by: Andrew Lunn Signed-off-by: Alvin Šipraga Reviewed-by: Vladimir Oltean Reviewed-by: Linus Walleij Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib

2021-10-13T00:35:18Z

Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver

2021-10-13T00:35:18Z

As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driver

2021-10-13T00:33:36Z

It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: tag_sja1105: be dsa_loop-safe

2021-08-18T09:33:15Z

Add support for tag_sja1105 running on non-sja1105 DSA ports, by making sure that every time we dereference dp->priv, we check the switch's dsa_switch_ops (otherwise we access a struct sja1105_port structure that is in fact something else). This adds an unconditional build-time dependency between sja1105 being built as module => tag_sja1105 must also be built as module. This was there only for PTP before. Some sane defaults must also take place when not running on sja1105 hardware. These are: - sja1105_xmit_tpid: the sja1105 driver uses different VLAN protocols depending on VLAN awareness and switch revision (when an encapsulated VLAN must be sent). Default to 0x8100. - sja1105_rcv_meta_state_machine: this aggregates PTP frames with their metadata timestamp frames. When running on non-sja1105 hardware, don't do that and accept all frames unmodified. - sja1105_defer_xmit: calls sja1105_port_deferred_xmit in sja1105_main.c which writes a management route over SPI. When not running on sja1105 hardware, bypass the SPI write and send the frame as-is. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: tag_sja1105: optionally build as module when switch driver is module if PTP is enabled

2021-08-05T12:30:14Z

TX timestamps are sent by SJA1110 as Ethernet packets containing metadata, so they are received by the tagging driver but must be processed by the switch driver - the one that is stateful since it keeps the TX timestamp queue. This means that there is an sja1110_process_meta_tstamp() symbol exported by the switch driver which is called by the tagging driver. There is a shim definition for that function when the switch driver is not compiled, which does nothing, but that shim is not effective when the tagging protocol driver is built-in and the switch driver is a module, because built-in code cannot call symbols exported by modules. So add an optional dependency between the tagger and the switch driver, if PTP support is enabled in the switch driver. If PTP is not enabled, sja1110_process_meta_tstamp() will translate into the shim "do nothing with these meta frames" function. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Reported-by: Arnd Bergmann Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: build tag_8021q.c as part of DSA core

2021-07-20T13:36:42Z

Upcoming patches will add tag_8021q related logic to switch.c and port.c, in order to allow it to make use of cross-chip notifiers. In addition, a struct dsa_8021q_context *ctx pointer will be added to struct dsa_switch. It seems fairly low-reward to #ifdef the *ctx from struct dsa_switch and to provide shim implementations of the entire tag_8021q.c calling surface (not even clear what to do about the tag_8021q cross-chip notifiers to avoid compiling them). The runtime overhead for switches which don't use tag_8021q is fairly small because all helpers will check for ds->tag_8021q_ctx being a NULL pointer and stop there. So let's make it part of dsa_core.o. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller