linux-dev/net/mac80211/rx.c, branch linus/master

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-05-12T23:15:30Z

No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

mac80211: fix rx reordering with non explicit / psmp ack policy

2022-05-04T09:33:23Z

When the QoS ack policy was set to non explicit / psmp ack, frames are treated as not being part of a BA session, which causes extra latency on reordering. Fix this by only bypassing reordering for packets with no-ack policy Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name Signed-off-by: Johannes Berg

mac80211: prepare sta handling for MLO support

2022-04-11T14:42:03Z

Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg

mac80211: introduce BSS color collision detection

2022-04-11T13:24:15Z

Add ieee80211_rx_check_bss_color_collision routine in order to introduce BSS color collision detection in mac80211 if it is not supported in HW/FW (e.g. for mt7915 chipset). Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify BSS color collision detection is supported in HW/FW. Set this for ath11k which apparently didn't need this code. Tested-by: Peter Chiu Co-developed-by: Ryder Lee Signed-off-by: Ryder Lee Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org [clarify commit message a bit, move flag to mac80211] Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-03-03T19:55:12Z

net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

mac80211: fix forwarded mesh frames AC & queue selection

2022-02-16T14:27:33Z

There are two problems with the current code that have been highlighted with the AQL feature that is now enbaled by default. First problem is in ieee80211_rx_h_mesh_fwding(), ieee80211_select_queue_80211() is used on received packets to choose the sending AC queue of the forwarding packet although this function should only be called on TX packet (it uses ieee80211_tx_info). This ends with forwarded mesh packets been sent on unrelated random AC queue. To fix that, AC queue can directly be infered from skb->priority which has been extracted from QOS info (see ieee80211_parse_qos()). Second problem is the value of queue_mapping set on forwarded mesh frames via skb_set_queue_mapping() is not the AC of the packet but a hardware queue index. This may or may not work depending on AC to HW queue mapping which is driver specific. Both of these issues lead to improper AC selection while forwarding mesh packets but more importantly due to improper airtime accounting (which is done on a per STA, per AC basis) caused traffic stall with the introduction of AQL. Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding") Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Co-developed-by: Remi Pommarel Signed-off-by: Remi Pommarel Signed-off-by: Nicolas Escande Link: https://lore.kernel.org/r/20220214173214.368862-1-nico.escande@gmail.com Signed-off-by: Johannes Berg

mac80211: fix EAPoL rekey fail in 802.3 rx path

2022-02-16T14:25:02Z

mac80211 set capability NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211 to upper layer by default. That means we should pass EAPoL packets through nl80211 path only, and should not send the EAPoL skb to netdevice diretly. At the meanwhile, wpa_supplicant would not register sock to listen EAPoL skb on the netdevice. However, there is no control_port_protocol handler in mac80211 for 802.3 RX packets, mac80211 driver would pass up the EAPoL rekey frame to netdevice and wpa_supplicant would be never interactive with this kind of packets, if SUPPORTS_RX_DECAP_OFFLOAD is enabled. This causes STA always rekey fail if EAPoL frame go through 802.3 path. To avoid this problem, align the same process as 802.11 type to handle this frame before put it into network stack. This also addresses a potential security issue in 802.3 RX mode that was previously fixed in commit a8c4d76a8dd4 ("mac80211: do not accept/forward invalid EAPOL frames"). Cc: stable@vger.kernel.org # 5.12+ Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support") Signed-off-by: Deren Wu Link: https://lore.kernel.org/r/6889c9fced5859ebb088564035f84fd0fa792a49.1644680751.git.deren.wu@mediatek.com [fix typos, update comment and add note about security issue] Signed-off-by: Johannes Berg

cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAP

2022-02-04T15:23:19Z

There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg

mac80211: allow non-standard VHT MCS-10/11

2022-01-04T14:45:17Z

Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by: Goldwyn Rodrigues Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by: Johannes Berg

Merge tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

2021-12-21T15:41:52Z

Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski