linux-dev/net/mac80211, branch master

wifi: mac80211: Set TWT Information Frame Disabled bit as 1

2022-11-02T08:50:40Z

The TWT Information Frame Disabled bit of control field of TWT Setup frame shall be set to 1 since handling TWT Information frame is not supported by current mac80211 implementation. Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode") Signed-off-by: Howard Hsu Link: https://lore.kernel.org/r/20221027015653.1448-1-howard-yh.hsu@mediatek.com Signed-off-by: Johannes Berg

wifi: mac80211: Fix ack frame idr leak when mesh has no route

2022-11-02T08:48:11Z

When trying to transmit an data frame with tx_status to a destination that have no route in the mesh, then it is dropped without recrediting the ack_status_frames idr. Once it is exhausted, wpa_supplicant starts failing to do SAE with NL80211_CMD_FRAME and logs "nl80211: Frame command failed". Use ieee80211_free_txskb() instead of kfree_skb() to fix it. Signed-off-by: Nicolas Cavallari Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr Signed-off-by: Johannes Berg

wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()

2022-11-02T08:46:11Z

When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg

wifi: mac80211: fix memory free error when registering wiphy fail

2022-10-21T10:34:59Z

ieee80211_register_hw free the allocated cipher suites when registering wiphy fail, and ieee80211_free_hw will re-free it. set wiphy_ciphers_allocated to false after freeing allocated cipher suites. Signed-off-by: taozhang Signed-off-by: Johannes Berg

Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

2022-10-16T22:27:07Z

Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1

Merge branch 'cve-fixes-2022-10-13'

2022-10-13T09:59:56Z

Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.

treewide: use get_random_bytes() when possible

2022-10-11T23:42:58Z

The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Reviewed-by: Christophe Leroy # powerpc Acked-by: Jakub Kicinski Signed-off-by: Jason A. Donenfeld

treewide: use get_random_{u8,u16}() when possible, part 1

2022-10-11T23:42:58Z

Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Acked-by: Jakub Kicinski Acked-by: Toke Høiland-Jørgensen # for sch_cake Signed-off-by: Jason A. Donenfeld

wifi: mac80211: fix crash in beacon protection for P2P-device

2022-10-10T07:51:25Z

If beacon protection is active but the beacon cannot be decrypted or is otherwise malformed, we call the cfg80211 API to report this to userspace, but that uses a netdev pointer, which isn't present for P2P-Device. Fix this to call it only conditionally to ensure cfg80211 won't crash in the case of P2P-Device. This fixes CVE-2022-42722. Reported-by: Sönke Huster Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space") Signed-off-by: Johannes Berg

wifi: mac80211: fix MBSSID parsing use-after-free

2022-10-10T07:50:23Z

When we parse a multi-BSSID element, we might point some element pointers into the allocated nontransmitted_profile. However, we free this before returning, causing UAF when the relevant pointers in the parsed elements are accessed. Fix this by not allocating the scratch buffer separately but as part of the returned structure instead, that way, there are no lifetime issues with it. The scratch buffer introduction as part of the returned data here is taken from MLO feature work done by Ilan. This fixes CVE-2022-42719. Fixes: 5023b14cf4df ("mac80211: support profile split between elements") Co-developed-by: Ilan Peer Signed-off-by: Ilan Peer Reviewed-by: Kees Cook Signed-off-by: Johannes Berg