linux-dev/net/sched/Kconfig, branch master

net: sched: incorrect Kconfig dependencies on Netfilter modules

2020-12-09T23:49:29Z

- NET_ACT_CONNMARK and NET_ACT_CTINFO only require conntrack support. - NET_ACT_IPT only requires NETFILTER_XTABLES symbols, not IP_NF_IPTABLES. After this patch, NET_ACT_IPT becomes consistent with NET_EMATCH_IPT. NET_ACT_IPT dependency on IP_NF_IPTABLES predates Linux-2.6.12-rc2 (initial git repository build). Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action") Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Pablo Neira Ayuso Link: https://lore.kernel.org/r/20201208204707.11268-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski

net: sched: fix spelling mistake in Kconfig "trys" -> "tries"

2020-12-09T00:01:56Z

There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

net: sched: Allow changing default qdisc to FQ-PIE

2020-07-02T00:43:27Z

Similar to fq_codel and the other qdiscs that can set as default, fq_pie is also suitable for general use without explicit configuration, which makes it a valid choice for this. This is useful in situations where a painless out-of-the-box solution for reducing bufferbloat is desired but fq_codel is not necessarily the best choice. For example, fq_pie can be better for DASH streaming, but there could be more cases where it's the better choice of the two simple AQMs available in the kernel. Signed-off-by: Danny Lin Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

net: qos: introduce a gate control flow action

2020-05-01T23:08:19Z

Introduce a ingress frame gate control flow action. Tc gate action does the work like this: Assume there is a gate allow specified ingress frames can be passed at specific time slot, and be dropped at specific time slot. Tc filter chooses the ingress frames, and tc gate action would specify what slot does these frames can be passed to device and what time slot would be dropped. Tc gate action would provide an entry list to tell how much time gate keep open and how much time gate keep state close. Gate action also assign a start time to tell when the entry list start. Then driver would repeat the gate entry list cyclically. For the software simulation, gate action requires the user assign a time clock type. Below is the setting example in user space. Tc filter a stream source ip address is 192.168.0.20 and gate action own two time slots. One is last 200ms gate open let frame pass another is last 100ms gate close let frames dropped. When the ingress frames have reach total frames over 8000000 bytes, the excessive frames will be dropped in that 200000000ns time slot. > tc qdisc add dev eth0 ingress > tc filter add dev eth0 parent ffff: protocol ip \ flower src_ip 192.168.0.20 \ action gate index 2 clockid CLOCK_TAI \ sched-entry open 200000000 -1 8000000 \ sched-entry close 100000000 -1 -1 > tc chain del dev eth0 ingress chain 0 "sched-entry" follow the name taprio style. Gate state is "open"/"close". Follow with period nanosecond. Then next item is internal priority value means which ingress queue should put. "-1" means wildcard. The last value optional specifies the maximum number of MSDU octets that are permitted to pass the gate during the specified time interval. Base-time is not set will be 0 as default, as result start time would be ((N + 1) * cycletime) which is the minimal of future time. Below example shows filtering a stream with destination mac address is 10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate action would run with one close time slot which means always keep close. The time cycle is total 200000000ns. The base-time would calculate by: 1357000000000 + (N + 1) * cycletime When the total value is the future time, it will be the start time. The cycletime here would be 200000000ns for this case. > tc filter add dev eth0 parent ffff: protocol ip \ flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \ action gate index 12 base-time 1357000000000 \ sched-entry close 200000000 -1 -1 \ clockid CLOCK_TAI Signed-off-by: Po Liu Signed-off-by: David S. Miller

net/sched: act_ct: Create nf flow table per zone

2020-03-03T23:09:12Z

Use the NF flow tables infrastructure for CT offload. Create a nf flow table per zone. Next patches will add FT entries to this table, and do the software offload. Signed-off-by: Paul Blakey Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

net: sched: add Flow Queue PIE packet scheduler

2020-01-23T10:38:31Z

Principles: - Packets are classified on flows. - This is a Stochastic model (as we use a hash, several flows might be hashed to the same slot) - Each flow has a PIE managed queue. - Flows are linked onto two (Round Robin) lists, so that new flows have priority on old ones. - For a given flow, packets are not reordered. - Drops during enqueue only. - ECN capability is off by default. - ECN threshold (if ECN is enabled) is at 10% by default. - Uses timestamps to calculate queue delay by default. Usage: tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ] [ target TIME ] [ tupdate TIME ] [ alpha NUMBER ] [ beta NUMBER ] [ quantum BYTES ] [ memory_limit BYTES ] [ ecnprob PERCENTAGE ] [ [no]ecn ] [ [no]bytemode ] [ [no_]dq_rate_estimator ] defaults: limit: 10240 packets, flows: 1024 target: 15 ms, tupdate: 15 ms (in jiffies) alpha: 1/8, beta : 5/4 quantum: device MTU, memory_limit: 32 Mb ecnprob: 10%, ecn: off bytemode: off, dq_rate_estimator: off Signed-off-by: Mohit P. Tahiliani Signed-off-by: Sachin D. Patil Signed-off-by: V. Saicharan Signed-off-by: Mohit Bhasi Signed-off-by: Leslie Monis Signed-off-by: Gautam Ramakrishnan Signed-off-by: David S. Miller

net: sch_ets: Add a new Qdisc

2019-12-18T21:32:29Z

Introduces a new Qdisc, which is based on 802.1Q-2014 wording. It is PRIO-like in how it is configured, meaning one needs to specify how many bands there are, how many are strict and how many are dwrr, quanta for the latter, and priomap. The new Qdisc operates like the PRIO / DRR combo would when configured as per the standard. The strict classes, if any, are tried for traffic first. When there's no traffic in any of the strict queues, the ETS ones (if any) are treated in the same way as in DRR. Signed-off-by: Petr Machata Acked-by: Jiri Pirko Signed-off-by: David S. Miller

net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N

2019-09-27T18:08:28Z

This a new feature, it is preferred that it defaults to N. We will probe the feature support from userspace before actually using it. Fixes: 95a7233c452a ('net: openvswitch: Set OvS recirc_id from tc chain index') Signed-off-by: Paul Blakey Signed-off-by: David S. Miller

net: Fix Kconfig indentation

2019-09-26T06:56:17Z

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Sven Eckelmann Signed-off-by: David S. Miller