linux-dev/net/wireless/core.c, branch linus/master

cfg80211: fix race in netlink owner interface destruction

2022-02-04T15:31:44Z

My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once. Reported-by: Toke Høiland-Jørgensen Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction") Tested-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg

cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface

2021-12-20T10:18:30Z

Currently cfg80211 checks for invalid channels whenever there is a regulatory update and stops the active interfaces if it is operating on an unsupported channel in the new regulatory domain. This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF set during wiphy registration which disables this enforcement when unsupported interface modes are supported by driver. Add support to enable this enforcement when Mesh Point interface type is advertised by drivers. Signed-off-by: Sriram R Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg

cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard

2021-12-20T09:37:36Z

ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg

cfg80211: move offchan_cac_event to a dedicated work

2021-11-19T08:38:50Z

In order to make cfg80211_offchan_cac_abort() (renamed from cfg80211_offchan_cac_event) callable in other contexts and without so much locking restrictions, make it trigger a new work instead of operating directly. Do some other renames while at it to clarify. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org [rewrite commit log] Signed-off-by: Johannes Berg

cfg80211: implement APIs for dedicated radar detection HW

2021-11-19T08:38:49Z

If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-10-28T17:43:58Z

include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski

cfg80211: fix management registrations locking

2021-10-25T13:20:22Z

The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by: Johannes Berg

cfg80211: always free wiphy specific regdomain

2021-09-27T11:30:33Z

In the (somewhat unlikely) event that we allocate a wiphy, then add a regdomain to it, and then fail registration, we leak the regdomain. Fix this by just always freeing it at the end, in the normal cases we'll free (and NULL) it during wiphy_unregister(). This happened when the wiphy settings were bad, and since they can be controlled by userspace with hwsim, syzbot was able to find this issue. Reported-by: syzbot+1638e7c770eef6b6c0d0@syzkaller.appspotmail.com Fixes: 3e0c3ff36c4c ("cfg80211: allow multiple driver regulatory_hints()") Signed-off-by: Johannes Berg Link: https://lore.kernel.org/r/20210927131105.68b70cef4674.I4b9f0aa08c2af28555963b9fe3d34395bb72e0cc@changeid Signed-off-by: Johannes Berg

cfg80211: set custom regdomain after wiphy registration

2021-06-23T11:05:09Z

We used to set regulatory info before the registration of the device and then the regulatory info didn't get set, because the device isn't registered so there isn't a device to set the regulatory info for. So set the regulatory info after the device registration. Call reg_process_self_managed_hints() once again after the device registration because it does nothing before it. Signed-off-by: Miri Korenblit Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c96eadcffe80.I86799c2c866b5610b4cf91115c21d8ceb525c5aa@changeid Signed-off-by: Johannes Berg

cfg80211: expose the rfkill device to the low level driver

2021-06-23T09:29:13Z

This will allow the low level driver to query the rfkill state. Signed-off-by: Emmanuel Grumbach Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg