linux-dev/net/wireless/util.c, branch linus/master

Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2022-03-11T21:00:17Z

Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

wireless: Use netif_rx().

2022-03-06T11:05:31Z

Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller

nl80211: add EHT MCS support

2022-02-16T14:42:52Z

Add support for reporting and calculating EHT bitrates. Signed-off-by: Veerendranath Jakkam Link: https://lore.kernel.org/r/1640163883-12696-7-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg

cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAP

2022-02-04T15:23:19Z

There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg

cfg80211: call cfg80211_stop_ap when switch from P2P_GO type

2021-11-15T09:51:13Z

If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by: Nguyen Dinh Phi Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com Cc: stable@vger.kernel.org Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down") Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-10-28T17:43:58Z

include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski

cfg80211: correct bridge/4addr mode check

2021-10-25T13:23:20Z

Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by: Janusz Dziedzic Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by: Johannes Berg

nl80211: Add LC placeholder band definition to nl80211_band

2021-10-21T15:25:17Z

Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg

cfg80211: call cfg80211_leave_ocb when switching away from OCB

2021-05-31T19:27:15Z

If the userland switches back-and-forth between NL80211_IFTYPE_OCB and NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a chance where the cleanup cfg80211_leave_ocb() is not called. This leads to initialization of in-use memory (e.g. init u.ibss while in-use by u.ocb) due to a shared struct/union within ieee80211_sub_if_data: struct ieee80211_sub_if_data { ... union { struct ieee80211_if_ap ap; struct ieee80211_if_vlan vlan; struct ieee80211_if_managed mgd; struct ieee80211_if_ibss ibss; // <- shares address struct ieee80211_if_mesh mesh; struct ieee80211_if_ocb ocb; // <- shares address struct ieee80211_if_mntr mntr; struct ieee80211_if_nan nan; } u; ... } Therefore add handling of otype == NL80211_IFTYPE_OCB, during cfg80211_change_iface() to perform cleanup when leaving OCB mode. link to syzkaller bug: https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5 Reported-by: syzbot+105896fac213f26056f9@syzkaller.appspotmail.com Signed-off-by: Du Cheng Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com Signed-off-by: Johannes Berg

cfg80211: mitigate A-MSDU aggregation attacks

2021-05-11T18:13:13Z

Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP) header, and if so dropping the complete A-MSDU frame. This mitigates known attacks, although new (unknown) aggregation-based attacks may remain possible. This defense works because in A-MSDU aggregation injection attacks, a normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042 header. In other words, the destination MAC address of the first A-MSDU subframe contains the start of an RFC1042 header during an aggregation attack. We can detect this and thereby prevent this specific attack. For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation". Note that for kernel 4.9 and above this patch depends on "mac80211: properly handle A-MSDUs that start with a rfc1042 header". Otherwise this patch has no impact and attacks will remain possible. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid Signed-off-by: Johannes Berg