linux-dev/sound/core/Kconfig, branch linus/master

ALSA: core: Fix typo in 'PCM Timer Interface' help

2022-03-18T08:19:37Z

Signed-off-by: Elijah Harding Link: https://lore.kernel.org/r/20220318015201.30871-1-eharding830@gmail.com Signed-off-by: Takashi Iwai

ALSA: control - add generic LED trigger module as the new control layer

2021-03-30T13:33:58Z

The recent laptops have usually two LEDs assigned to reflect the speaker and microphone mute state. This implementation adds a tiny layer on top of the control API which calculates the state for those LEDs using the driver callbacks. Two new access flags are introduced to describe the controls which affects the audio path settings (an easy code change for drivers). The LED resource can be shared with multiple sound cards with this code. The user space controls may be added to the state chain on demand, too. This code should replace the LED code in the HDA driver and add a possibility to easy extend the other drivers (ASoC codecs etc.). Signed-off-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz Signed-off-by: Takashi Iwai

ALSA: jack: implement software jack injection via debugfs

2021-02-02T09:37:07Z

This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │ ├── HDMI_DP_pcm_10_Jack │ │ ├── jackin_inject │ │ ├── kctl_id │ │ ├── mask_bits │ │ ├── status │ │ ├── sw_inject_enable │ │ └── type ... │ └── HDMI_DP_pcm_9_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type └── card1 ├── HDMI_DP_pcm_5_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type ... ├── Headphone_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai Reviewed-by: Jaroslav Kysela Reviewed-by: Kai Vehmanen Signed-off-by: Hui Wang Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai

ALSA: control: Add verification for kctl accesses

2020-01-04T08:37:59Z

The current implementation of ALSA control API fully relies on the callbacks of each driver, and there is no verification of the values passed via API. This patch is an attempt to improve the situation slightly by adding the validation code for the values stored via info and get callbacks. The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends on CONFIG_SND_DEBUG and off as default since the validation would require a slight overhead including the additional call of info callback at each get callback invocation. When this config is enabled, the values stored by each info callback invocation are verified, namely: - Whether the info type is valid - Whether the number of enum items is non-zero - Whether the given info count is within the allowed boundary Similarly, the values stored at each get callback are verified as well: - Whether the values are within the given range - Whether the values are aligned with the given step - Whether any further changes are seen in the data array over the given info count The last point helps identifying a possibly invalid data type access, typically a case where the info callback declares the type being SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store the values in value.integer.value[] array. When a validation fails, the ALSA core logs an error message including the device and the control ID, and the API call also returns an error. So, with the new validation turned on, the driver behavior difference may be visible on user-space, too -- it's intentional, though, so that we can catch an error more clearly. The patch also introduces a new ctl access type, SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with other access bits to indicate that the ctl element won't be verified. It's useful when a driver code is specially written to access the data greater than info->count size by some reason. For example, this flag is actually set now in HD-audio HDMI codec driver which needs to clear the data array in the case of the disconnected monitor. Also, the PCM channel-map helper code is slightly modified to avoid the false-positive hit by this validation code, too. Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de Signed-off-by: Takashi Iwai

sound: Fix Kconfig indentation

2019-10-07T01:53:03Z

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Mark Brown Link: https://lore.kernel.org/r/20191004144931.3851-1-krzk@kernel.org Signed-off-by: Takashi Iwai

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

docs: Fix some broken references

2018-06-15T21:10:01Z

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

ALSA: seq: Allow the modular sequencer registration

2017-06-12T06:43:33Z

Many drivers bind the sequencer stuff in off-load by another driver module, so that it's loaded only on demand. In the current code, this mechanism doesn't work when the driver is built-in while the sequencer is module. We check with IS_REACHABLE() and enable only when the sequencer is in the same level of build. However, this is basically a overshoot. The binder code (snd-seq-device) is an individual module from the sequencer core (snd-seq), and we just have to make the former a built-in while keeping the latter a module for allowing the scenario like the above. This patch achieves that by rewriting Kconfig slightly. Now, a driver that provides the manual sequencer device binding should select CONFIG_SND_SEQ_DEVICE in a way as select SND_SEQ_DEVICE if SND_SEQUENCER != n Note that the "!=n" is needed here to avoid the influence of the sequencer core is module while the driver is built-in. Also, since rawmidi.o may be linked with snd_seq_device.o when built-in, we have to shuffle the code to make the linker happy. (the kernel linker isn't smart enough yet to handle such a case.) That is, snd_seq_device.c is moved to sound/core from sound/core/seq, as well as Makefile. Last but not least, the patch replaces the code using IS_REACHABLE() with IS_ENABLED(), since now the condition meets always when enabled. Signed-off-by: Takashi Iwai

ALSA: seq: Reorganize kconfig and build

2017-06-09T20:10:06Z

This is a slightly intensive rewrite of Kconfig and Makefile about ALSA sequencer stuff. The first major change is that the kconfig items for the sequencer are moved to sound/core/seq/Kconfig. OK, that's easy. The substantial change is that, instead of hackish top-level module selection in Makefile, we define a Kconfig item for each sequencer module. The driver that requires such sequencer components select exclusively the kconfig items. This is more straightforward and standard way. Signed-off-by: Takashi Iwai

ALSA: seq: Allow the tristate build of OSS emulation

2017-06-09T20:09:45Z

Currently OSS sequencer emulation is tied with ALSA sequencer core, both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y, the OSS sequencer emulation is also always built-in, even though the functionality can be built as an individual module. This patch changes the rule and allows users to build snd-seq-oss module while others are built-in. Essentially, it's just a few simple changes in Kconfig and Makefile. Some driver codes like opl3 need to convert from the simple ifdef to IS_ENABLED(). But that's all. You might wonder how about the dependency: right, it can be messy, but it still works. Since we rewrote the sequencer binding with the standard bus, the driver can be bound at any time on demand. So, the synthesizer driver module can be loaded individually from the OSS emulation core before/after it. Signed-off-by: Takashi Iwai