linux-dev/sound/soc/pxa, branch master

ASoC: pxa: Migrate to new style legacy DAI naming flag

2022-06-27T12:16:40Z

Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). These drivers appear to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220623125250.2355471-29-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown

ASoC: pxa: Rename set_fmt_new back to set_fmt

2022-06-06T11:34:08Z

Now the core has been migrated across to the new direct clock specification we can move the drivers back to the normal set_fmt callback. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220519154318.2153729-44-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown

ASoC: pxa: Update to use set_fmt_new callback

2022-06-06T11:33:41Z

As part of updating the core to directly tell drivers if they are clock provider or consumer update these CPU side drivers to use the new direct callback. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220519154318.2153729-17-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:23:54Z

Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...

ASoC: pxa: i2s: use normal MMIO accessors

2022-05-07T20:55:49Z

To avoid dereferencing hardwired constant pointers from a global header file, change the driver to use devm_platform_ioremap_resource for getting an __iomem pointer, and then using readl/writel on that. Each pointer dereference gets changed by a search&replace, which leads to a few overlong lines, but seems less risky than trying to clean up the code at the same time. Acked-by: Mark Brown Acked-by: Robert Jarzmik Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann

ASoC: pxa: use pdev resource for FIFO regs

2022-05-07T20:55:49Z

The driver currently takes the hardwired FIFO address from a header file that we want to eliminate. Change it to use the mmio resource instead and stop including the here. Acked-by: Mark Brown Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik Signed-off-by: Arnd Bergmann

ARM: pxa: magician: use platform driver for audio

2022-05-07T20:55:48Z

The magician audio driver creates a codec device and gets data from a board specific header file, both of which is a bit suspicious. Move these into the board file itself, using a gpio lookup table. Acked-by: Mark Brown Acked-by: Robert Jarzmik Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann

ARM: pxa: z2: use gpio lookup for audio device

2022-05-07T20:55:48Z

The audio device is allocated by the audio driver, and it uses a gpio number from the mach/z2.h header file. Change it to use a gpio lookup table for the device allocated by the driver to keep the header file local to the machine. Acked-by: Mark Brown Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij Acked-by: Robert Jarzmik Signed-off-by: Arnd Bergmann

ARM: pxa: eseries: use gpio lookup for audio

2022-05-07T20:55:48Z

The three eseries machines have very similar drivers for audio, all using the mach/eseries-gpio.h header for finding the gpio numbers. Change these to use gpio descriptors to avoid the header file dependency. I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for consistency here. Acked-by: Mark Brown Acked-by: Robert Jarzmik Reviewed-by: Linus Walleij Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann

ARM: pxa: spitz: use gpio descriptors for audio

2022-05-07T20:55:47Z

The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Acked-by: Mark Brown Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann