linux-dev/tools/perf/arch/arm64, branch linus/master

perf mem: Trace physical address for Arm SPE events

2022-06-03T19:39:27Z

Currently, Arm SPE events don't trace physical address, therefore, the field 'phys_addr' is always zero in synthesized memory samples. This leads to perf c2c tool cannot locate the memory node for samples. This patch enables configuration 'pa_enable' for Arm SPE events, so the physical address packet can be traced, finally this can allow perf c2c tool to locate properly for memory node. Signed-off-by: Leo Yan Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: German Gomez Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: John Garry Cc: Mark Rutland Cc: Mike Leach Cc: Peter Zijlstra Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220530083645.253432-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools arm64: Add support for VG register

2022-05-27T16:21:33Z

Add the name of the VG register so it can be used in --user-regs The event will fail to open if the register is requested but not available so only add it to the mask if the kernel supports sve and also if it supports that specific register. Committer notes: Add conditional definition of HWCAP_SVE, as suggested by Leo Yan, to build on older systems where this is not available in the system headers. Reviewed-by: Leo Yan Signed-off-by: James Clark Cc: Alexander Shishkin Cc: German Gomez Cc: Ingo Molnar Cc: Jiri Olsa Cc: John Garry Cc: Mark Brown Cc: Mark Rutland Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220525154114.718321-6-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf unwind arm64: Decouple Libunwind register names from Perf

2022-05-26T15:43:05Z

DWARF register numbers and real register numbers on aarch64 are equivalent. Remove the references to the register names from Libunwind so that new registers are supported without having to add build time feature checks for each new register. The unwinder won't ask for a register that it doesn't know about and Perf will already report an error for an unknown or unrecorded register in the perf_reg_value() function so extra validation isn't needed. After this change the new VG register can be read by libunwind. Reviewed-by: Leo Yan Signed-off-by: James Clark Cc: Alexander Shishkin Cc: German Gomez Cc: Ingo Molnar Cc: Jiri Olsa Cc: John Garry Cc: Mark Brown Cc: Mark Rutland Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220525154114.718321-5-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf auxtrace: Record whether an auxtrace mmap is needed

2022-05-10T17:27:19Z

Add a flag needs_auxtrace_mmap to record whether an auxtrace mmap is needed, in preparation for correctly determining whether or not an auxtrace mmap is needed. Signed-off-by: Adrian Hunter Acked-by: Ian Rogers Cc: Alexey Bayduraev Cc: Jiri Olsa Cc: Leo Yan Cc: Namhyung Kim Link: http://lore.kernel.org/lkml/20220506122601.367589-10-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf symbol: Remove archsymbolsfixup_end()

2022-04-28T13:51:40Z

Now the generic code can handle kallsyms fixup properly so no need to keep the arch-functions anymore. Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim Acked-by: Ian Rogers Cc: Heiko Carstens Cc: Ingo Molnar Cc: Jiri Olsa Cc: John Garry Cc: Leo Yan Cc: Mark Rutland Cc: Masami Hiramatsu Cc: Mathieu Poirier Cc: Michael Ellerman Cc: Michael Petlan Cc: Peter Zijlstra Cc: Song Liu Cc: Will Deacon Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf arm-spe: Fix SPE events with phys addresses

2022-04-28T13:39:28Z

This patch corrects a bug whereby SPE collection is invoked with pa_enable=1 but synthesized events fail to show physical addresses. Reviewed-by: Leo Yan Signed-off-by: Timothy Hayes Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Fastabend Cc: John Garry Cc: KP Singh Cc: Mark Rutland Cc: Martin KaFai Lau Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Song Liu Cc: Will Deacon Cc: Yonghong Song Cc: bpf@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220421165205.117662-3-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf: arm-spe: Fix perf report --mem-mode

2022-04-09T15:34:29Z

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't allow opening the file unless one of the events has PERF_SAMPLE_DATA_SRC set. SPE doesn't have this set even though synthetic memory data is generated after it is decoded. Fix this issue by setting DATA_SRC on SPE events. This has no effect on the data collected because the SPE driver doesn't do anything with that flag and doesn't generate samples. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Signed-off-by: James Clark Tested-by: Leo Yan Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: German Gomez Cc: Jiri Olsa Cc: John Garry Cc: Leo Yan Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland Cc: Mathieu Poirier Cc: Ravi Bangoria Cc: Will Deacon Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Rename cpus to user_requested_cpus

2022-04-01T19:19:35Z

evlist contains cpus and all_cpus. all_cpus is the union of the cpu maps of all evsels. For non-task targets, cpus is set to be cpus requested from the command line, defaulting to all online cpus if no cpus are specified. For an uncore event, all_cpus may be just CPU 0 or every online CPU. This causes all_cpus to have fewer values than the cpus variable which is confusing given the 'all' in the name. To try to make the behavior clearer, rename cpus to user_requested_cpus and add comments on the two struct variables. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Alexei Starovoitov Cc: Alexey Bayduraev Cc: Andi Kleen Cc: Andrii Nakryiko Cc: Daniel Borkmann Cc: German Gomez Cc: James Clark Cc: Jiri Olsa Cc: John Fastabend Cc: John Garry Cc: KP Singh Cc: Kajol Jain Cc: Leo Yan Cc: Mark Rutland Cc: Martin KaFai Lau Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Riccardo Mancini Cc: Song Liu Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Will Deacon Cc: Yonghong Song Cc: bpf@vger.kernel.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220328232648.2127340-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf arm-spe: Use advertised caps/min_interval as default sample_period

2022-02-23T10:02:23Z

When recording SPE traces, the default sample_period is currently being set to 1 in the perf_event_attr fields, instead of the value advertised in '/sys/devices/arm_spe_0/caps/min_interval': Before: $ perf record -e arm_spe// -vv -- sleep 1 [...] { sample_period, sample_freq } 1 [...] Use the value from the above sysfs location as a more sensible default (it was already being read, but the value not being used) After: $ perf record -e arm_spe// -vv -- sleep 1 [...] { sample_period, sample_freq } 1024 [...] Reviewed-by: Leo Yan Signed-off-by: German Gomez Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Garry Cc: Mark Rutland Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220221171042.58460-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf cpumap: Give CPUs their own type

2022-01-12T17:28:23Z

A common problem is confusing CPU map indices with the CPU, by wrapping the CPU with a struct then this is avoided. This approach is similar to atomic_t. Committer notes: To make it build with BUILD_BPF_SKEL=1 these files needed the conversions to 'struct perf_cpu' usage: tools/perf/util/bpf_counter.c tools/perf/util/bpf_counter_cgroup.c tools/perf/util/bpf_ftrace.c Also perf_env__get_cpu() was removed back in "perf cpumap: Switch cpu_map__build_map to cpu function". Additionally these needed to be fixed for the ARM builds to complete: tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/pmu.c Suggested-by: John Garry Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Andi Kleen Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Paul Clarke Cc: Peter Zijlstra Cc: Riccardo Mancini Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Vineet Singh Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo