linux-dev/tools/perf/arch/s390/annotate, branch master

perf map_symbol: Rename ms->mg to ms->maps

2019-11-26T14:07:46Z

One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf maps: Merge 'struct maps' with 'struct map_groups'

2019-11-26T14:07:46Z

And pick the shortest name: 'struct maps'. The split existed because we used to have two groups of maps, one for functions and one for variables, but that only complicated things, sometimes we needed to figure out what was at some address and then had to first try it on the functions group and if that failed, fall back to the variables one. That split is long gone, so for quite a while we had only one struct maps per struct map_groups, simplify things by combining those structs. First patch is the minimum needed to merge both, follow up patches will rename 'thread->mg' to 'thread->maps', etc. Cc: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Stop using map->groups, use map_symbol->mg instead

2019-11-12T11:20:53Z

These were the last uses of map->groups, next cset will nuke it. Cc: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-n3g0foos7l7uxq9nar0zo0vj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'

2019-11-12T11:20:53Z

So that we pass that substructure around and with it consolidate lots of functions that receive a (map, symbol) pair and now can receive just a 'struct map_symbol' pointer. This further paves the way to add 'struct map_groups' to 'struct map_symbol' so that we can have all we need for annotation so that we can ditch 'struct map'->groups, i.e. have the map_groups pointer in a more central place, avoiding the pointer in the 'struct map' that have tons of instances. Cc: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf map_groups: Pass the object to map_groups__find_ams()

2019-11-12T11:20:53Z

We were just passing a map to look for and reuse its map->groups member, but the idea is that this is going away, as a map can be in multiple rb_trees when being reused via a map_node, so do as all the other map_groups methods and pass as its first arg the object being operated on. Cc: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-nmi2pbggqloogwl6vxrvex5a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Fix arch specific ->init() failure errors

2019-09-30T20:30:03Z

They are called from symbol__annotate() and to propagate errors that can help understand the problem make them return what symbol__strerror_disassemble() known, i.e. errno codes and other annotation specific errors in a special, out of errnos, range. Reported-by: Russell King - ARM Linux admin Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra , Cc: Will Deacon Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Calculate the max instruction name, align column to that

2019-03-06T19:40:15Z

We were hardcoding '6' as the max instruction name, and we have lots that are longer than that, see the diff from two 'P' printed TUI annotations for a libc function that uses instructions with long names, such as 'vpmovmskb' with its 9 chars: --- __strcmp_avx2.annotation.before 2019-03-06 16:31:39.368020425 -0300 +++ __strcmp_avx2.annotation 2019-03-06 16:32:12.079450508 -0300 @@ -2,284 +2,284 @@ Event: cycles:ppp Percent endbr64 - 0.10 mov %edi,%eax + 0.10 mov %edi,%eax - xor %edx,%edx + xor %edx,%edx - 3.54 vpxor %ymm7,%ymm7,%ymm7 + 3.54 vpxor %ymm7,%ymm7,%ymm7 - or %esi,%eax + or %esi,%eax - and $0xfff,%eax + and $0xfff,%eax - cmp $0xf80,%eax + cmp $0xf80,%eax - ↓ jg 370 + ↓ jg 370 - 27.07 vmovdqu (%rdi),%ymm1 + 27.07 vmovdqu (%rdi),%ymm1 - 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 + 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 - 2.15 vpminub %ymm1,%ymm0,%ymm0 + 2.15 vpminub %ymm1,%ymm0,%ymm0 - 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 + 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 - 0.43 vpmovmskb %ymm0,%ecx + 0.43 vpmovmskb %ymm0,%ecx - 1.53 test %ecx,%ecx + 1.53 test %ecx,%ecx - ↓ je b0 + ↓ je b0 - 5.26 tzcnt %ecx,%edx + 5.26 tzcnt %ecx,%edx - 18.40 movzbl (%rdi,%rdx,1),%eax + 18.40 movzbl (%rdi,%rdx,1),%eax - 7.09 movzbl (%rsi,%rdx,1),%edx + 7.09 movzbl (%rsi,%rdx,1),%edx - 3.34 sub %edx,%eax + 3.34 sub %edx,%eax 2.37 vzeroupper ← retq nop - 50: tzcnt %ecx,%edx + 50: tzcnt %ecx,%edx - movzbl 0x20(%rdi,%rdx,1),%eax + movzbl 0x20(%rdi,%rdx,1),%eax - movzbl 0x20(%rsi,%rdx,1),%edx + movzbl 0x20(%rsi,%rdx,1),%edx - sub %edx,%eax + sub %edx,%eax vzeroupper ← retq - data16 nopw %cs:0x0(%rax,%rax,1) + data16 nopw %cs:0x0(%rax,%rax,1) Reported-by: Travis Downs LPU-Reference: CAOBGo4z1KfmWeOm6Et0cnX5Z6DWsG2PQbAvRn1MhVPJmXHrc5g@mail.gmail.com Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-89wsdd9h9g6bvq52sgp6d0u4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Handle arm64 move instructions

2018-08-30T18:52:25Z

Add default handler for non-jump instructions. This really only has an effect on instructions that compute a PC-relative address, such as 'adrp,' as seen in these couple of examples: BEFORE: adrp x0, ffff20000aa11000 AFTER: adrp x0, kallsyms_token_index+0xce000 BEFORE: adrp x23, ffff20000ae94000 <__per_cpu_load> AFTER: adrp x23, __per_cpu_load The implementation is identical to that of s390, but with a slight adjustment for objdump whitespace propagation (arm64 objdump puts spaces after commas, whereas s390's presumably doesn't). The mov__scnprintf() declaration is moved from s390's to arm64's instructions.c because arm64's gets included before s390's. Committer testing: Ran 'perf annotate --stdio2 > /tmp/{before,after}' no diff. Signed-off-by: Kim Phillips Tested-by: Arnaldo Carvalho de Melo Tested-by: Thomas Richter Cc: Alexander Shishkin Cc: Greg Kroah-Hartman Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20180827150807.304110d2e9919a17c832ca48@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Pass function descriptor to its instruction parsing routines

2018-03-21T19:19:41Z

We need that to figure out if jumps have targets in a different function. E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1 has a line like this: jne c469be Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Handle s390 PC relative load and store instruction.

2018-03-08T14:30:53Z

S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by: Thomas Richter Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo