linux-dev/tools/testing/selftests/bpf/progs, branch master

selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1

2022-10-13T15:27:38Z

In commit 1bfe26fb0827 ("bpf: Add verifier support for custom callback return range"), the verifier was updated to require callbacks to BPF helpers to explicitly specify the range of values that can be returned. bpf_user_ringbuf_drain() was merged after this in commit 205715673844 ("bpf: Add bpf_user_ringbuf_drain() helper"), and this change in default behavior was missed. This patch updates the BPF_MAP_TYPE_USER_RINGBUF selftests to also return 1 from a bpf_user_ringbuf_drain() callback so as to properly test this going forward. Signed-off-by: David Vernet Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20221012232015.1510043-3-void@manifault.com

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-10-04T20:38:03Z

Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...

selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)

2022-09-29T16:25:47Z

This patch changes the bpf_dctcp test to ensure the recurred bpf_setsockopt(TCP_CONGESTION) returns -EBUSY. Signed-off-by: Martin KaFai Lau Link: https://lore.kernel.org/r/20220929070407.965581-6-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov

selftests/bpf: Test parameterized task BPF iterators.

2022-09-28T23:30:03Z

Test iterators of vma, files and tasks. Ensure the API works appropriately to visit all tasks, tasks in a process, or a particular task. Signed-off-by: Kui-Feng Lee Signed-off-by: Andrii Nakryiko Acked-by: Yonghong Song Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20220926184957.208194-5-kuifeng@fb.com

selftests/bpf: Fix get_func_ip offset test for CONFIG_X86_KERNEL_IBT

2022-09-27T03:30:40Z

With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset won't work because of the extra endbr instruction. As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection and using appropriate offset value based on that. Also removing test7 program, because it does the same as test6. Suggested-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20220926153340.1621984-7-jolsa@kernel.org Signed-off-by: Alexei Starovoitov

bpf: Return value in kprobe get_func_ip only for entry address

2022-09-27T03:30:40Z

Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Acked-by: Martynas Pumputis Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov

bpf: Adjust kprobe_multi entry_ip for CONFIG_X86_KERNEL_IBT

2022-09-27T03:30:39Z

Martynas reported bpf_get_func_ip returning +4 address when CONFIG_X86_KERNEL_IBT option is enabled. When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction at the function entry, which screws return value of bpf_get_func_ip() helper that should return the function address. There's short term workaround for kprobe_multi bpf program made by Alexei [1], but we need this fixup also for bpf_get_attach_cookie, that returns cookie based on the entry_ip value. Moving the fixup in the fprobe handler, so both bpf_get_func_ip and bpf_get_attach_cookie get expected function address when CONFIG_X86_KERNEL_IBT option is enabled. Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip so it's clearer this is an ftrace __fentry__ ip. [1] commit 7f0059b58f02 ("selftests/bpf: Fix kprobe_multi test.") Cc: Peter Zijlstra Reported-by: Martynas Pumputis Acked-by: Andrii Nakryiko Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20220926153340.1621984-5-jolsa@kernel.org Signed-off-by: Alexei Starovoitov

selftests/bpf: Simplify cgroup_hierarchical_stats selftest

2022-09-23T20:59:08Z

The cgroup_hierarchical_stats selftest is complicated. It has to be, because it tests an entire workflow of recording, aggregating, and dumping cgroup stats. However, some of the complexity is unnecessary. The test now enables the memory controller in a cgroup hierarchy, invokes reclaim, measure reclaim time, THEN uses that reclaim time to test the stats collection and aggregation. We don't need to use such a complicated stat, as the context in which the stat is collected is orthogonal. Simplify the test by using a simple stat instead of reclaim time, the total number of times a process has ever entered a cgroup. This makes the test simpler and removes the dependency on the memory controller and the memory reclaim interface. Signed-off-by: Yosry Ahmed Signed-off-by: Andrii Nakryiko Acked-by: KP Singh Link: https://lore.kernel.org/bpf/20220919175330.890793-1-yosryahmed@google.com

selftests/bpf: add tests for bpf_ct_set_nat_info kfunc

2022-09-22T02:25:26Z

Introduce self-tests for bpf_ct_set_nat_info kfunc used to set the source or destination nat addresses/ports. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/803e33294e247744d466943105879414344d3235.1663778601.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov

selftests/bpf: Add tests for dynamic pointers parameters in kfuncs

2022-09-22T00:33:43Z

Add tests to ensure that only supported dynamic pointer types are accepted, that the passed argument is actually a dynamic pointer, that the passed argument is a pointer to the stack, and that bpf_verify_pkcs7_signature() correctly handles dynamic pointers with data set to NULL. The tests are currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu Acked-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20220920075951.929132-14-roberto.sassu@huaweicloud.com Signed-off-by: Alexei Starovoitov