linux-dev/tools/testing/selftests/futex/functional/Makefile, branch linus/master

selftests: futex: Add the uapi headers include variable

2022-02-24T00:20:32Z

Out of tree build of this test fails if relative path of the output directory is specified. KBUILD_OUTPUT also doesn't point to the correct directory when relative path is used. Thus out of tree builds fail. Remove the un-needed include paths and use KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum Signed-off-by: Shuah Khan

selftests: futex: set DEFAULT_INSTALL_HDR_PATH

2022-02-24T00:14:36Z

If only futex selftest is compiled, uapi header files are copied to the selftests/futex/functional directory. This copy isn't needed. Set the DEFAULT_INSTALL_HDR_PATH variable to 1 to use the default header install path only. This removes extra copy of header file. Signed-off-by: Muhammad Usama Anjum Signed-off-by: Shuah Khan

selftests: futex: Add sys_futex_waitv() test

2021-10-07T11:51:12Z

Create a new file to test the waitv mechanism. Test both private and shared futexes. Wake the last futex in the array, and check if the return value from futex_waitv() is the right index. Signed-off-by: André Almeida Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20210923171111.300673-20-andrealmeid@collabora.com

selftests: futex: Add futex compare requeue test

2021-06-22T09:20:16Z

Add testing for futex_cmp_requeue(). The first test just requeues from one waiter to another one, and wakes it. The second performs both wake and requeue, and checks the return values to see if the operation woke/requeued the expected number of waiters. Signed-off-by: André Almeida Signed-off-by: Thomas Gleixner Acked-by: Davidlohr Bueso Link: https://lore.kernel.org/r/20210531165036.41468-3-andrealmeid@collabora.com

selftests: futex: Add futex wait test

2021-06-22T09:20:15Z

There are three different strategies to uniquely identify a futex in the kernel: - Private futexes: uses the pointer to mm_struct and the page address - Shared futexes: checks if the page containing the address is a PageAnon: - If it is, uses the same data as a private futexes - If it isn't, uses an inode sequence number from struct inode and the page's index Create a selftest to check those three paths and basic wait/wake mechanism. Signed-off-by: André Almeida Signed-off-by: Thomas Gleixner Acked-by: Davidlohr Bueso Link: https://lore.kernel.org/r/20210531165036.41468-2-andrealmeid@collabora.com

selftests: futex: Correctly include headers dirs

2021-05-12T18:44:58Z

When building selftests, the build system will install uapi linux headers at usr/include in kernel source's root directory. When building with a different output folder, the headers will be installed at kselftests/usr/include. Add both paths so we can build the tests using up-to-date headers. Currently, this is uncommon to happen since it's rare to find a build system with an outdated futex header, but it happens when testing new futex operations. Signed-off-by: André Almeida Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20210427135328.11013-2-andrealmeid@collabora.com

selftests: use LDLIBS for libraries instead of LDFLAGS

2020-02-13T20:14:34Z

While building selftests, the following errors were observed: > tools/testing/selftests/timens' > gcc -Wall -Werror -pthread -lrt -ldl timens.c -o tools/testing/selftests/timens/timens > /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers': > timens.c:(.text+0x65a): undefined reference to `timer_create' > collect2: error: ld returned 1 exit status Quoting commit 870f193d48c2 ("selftests: net: use LDLIBS instead of LDFLAGS"): The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. While at here, correct other selftests, not only timens ones. Reported-by: Shuah Khan Signed-off-by: Dmitry Safonov Tested-by: Shuah Khan Signed-off-by: Shuah Khan

selftests: Fix test errors related to lib.mk khdr target

2018-12-13T23:51:30Z

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added khdr target to run headers_install target from the main Makefile. The logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize variables and include files to run headers_install from the top level Makefile. There are a few problems with this logic. 1. Exposes top_srcdir to all tests 2. Common logic impacts all tests 3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in some cases, and STATIC_LIBS in other cases. This makes this framework confusing to use. The common logic that runs for all tests even when KSFT_KHDR_INSTALL isn't defined by the test. top_srcdir is initialized to a default value when test doesn't initialize it. It works for all tests without a sub-dir structure and tests with sub-dir structure fail to build. e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make: *** No rule to make target '../../../../scripts/subarch.include'. Stop. There is no reason to require all tests to define top_srcdir and there is no need to require tests to add khdr dependency using adhoc changes to TEST_* and other variables. Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests that have the dependency on headers_install. Change common logic to include khdr target define and "all" target with dependency on khdr when KSFT_KHDR_INSTALL is defined. Only tests that have dependency on headers_install have to define just the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to specify khdr dependency in the test Makefiles. Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk") Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan

selftests: add headers_install to lib.mk

2018-09-05T14:12:09Z

If the kernel headers aren't installed we can't build all the tests. Add a new make target rule 'khdr' in the file lib.mk to generate the kernel headers and that gets include for every test-dir Makefile that includes lib.mk If the testdir in turn have its own sub-dirs the top_srcdir needs to be set to the linux-rootdir to be able to generate the kernel headers. Signed-off-by: Anders Roxell Reviewed-by: Fathi Boudra Signed-off-by: Shuah Khan (Samsung OSG)

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman