aboutsummaryrefslogblamecommitdiffstats
path: root/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h
blob: b7fc26c4f73892fe177ab4f6527d349ca0afc06d (plain) (tree)
1
2
3
4
5
6
7
8
9
10







                                 

                    

  
             
                 

                         



                

                                                                           
               

                                                                            







                                          

                      

  
  
                                       
  

                                                                   
  
                                              
  

                                                                   
  


























                                                            



                                 







                                                                    

                         



              









                                        

                                        


                                                                                




                                                             
                             


                                                           
                                   




                                                                    
                                     




                                                           

                                                                          
 
                                                                   

                                                             


                                           

                                                              

                                                



                                                             

                                                              


                                                               
                                                             

                                              
                                                      
                                                                      



                                                                    
                                    





                                                                       
                                      






                                                                  



                                                                                  
 


                                    
 

                                         





                                                                      
                             
 

                                     



                                                        
                                         



                                                        

                                               
 
                                         

                                                                                





                                                                           
 
                                       


                                                                               
                                         

                                                                                 
                                                 








                                                                                 

                                           
                                                                


                                                                    

                                                                      


                                                                           
           


                                                  
 

                                                             
                                                 
                                             
                                                     
                                           
                                                   
                                           
                                              
                                        
                                                         
                                       



                                                                        



                                               
                                            
           


                                          

                                             
 
                                              







                                                                                  
                                     



                                               

                                
 
                                  
                                                                          
                                   

                                                                      

                                                                                 
                                                             





                                                                                  
                                                                                                 
                                                                                         

                                             
                                 
                                                                             
                                                                     



                                                                             
                                         
                                                                        
                                    
                                    
 
                                              






                                             
                                            














                                                                                        
                                 
                                                                                          
                                      

                                 
                                       
                                             
 
                                      

                                                   


                                                         
                                        
                               









                                                                         



                              













                                           

  

                                  
                     
                                               




                                        
                                          
                      

                               



                             







                                              






                         





                                            
                                                        
#ifndef __MYRI10GE_MCP_H__
#define __MYRI10GE_MCP_H__

#define MXGEFW_VERSION_MAJOR	1
#define MXGEFW_VERSION_MINOR	4

/* 8 Bytes */
struct mcp_dma_addr {
	__be32 high;
	__be32 low;
};

/* 4 Bytes */
struct mcp_slot {
	__sum16 checksum;
	__be16 length;
};

/* 64 Bytes */
struct mcp_cmd {
	__be32 cmd;
	__be32 data0;		/* will be low portion if data > 32 bits */
	/* 8 */
	__be32 data1;		/* will be high portion if data > 32 bits */
	__be32 data2;		/* currently unused.. */
	/* 16 */
	struct mcp_dma_addr response_addr;
	/* 24 */
	u8 pad[40];
};

/* 8 Bytes */
struct mcp_cmd_response {
	__be32 data;
	__be32 result;
};

/*
 * flags used in mcp_kreq_ether_send_t:
 *
 * The SMALL flag is only needed in the first segment. It is raised
 * for packets that are total less or equal 512 bytes.
 *
 * The CKSUM flag must be set in all segments.
 *
 * The PADDED flags is set if the packet needs to be padded, and it
 * must be set for all segments.
 *
 * The  MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative
 * length of all previous segments was odd.
 */

#define MXGEFW_FLAGS_SMALL      0x1
#define MXGEFW_FLAGS_TSO_HDR    0x1
#define MXGEFW_FLAGS_FIRST      0x2
#define MXGEFW_FLAGS_ALIGN_ODD  0x4
#define MXGEFW_FLAGS_CKSUM      0x8
#define MXGEFW_FLAGS_TSO_LAST   0x8
#define MXGEFW_FLAGS_NO_TSO     0x10
#define MXGEFW_FLAGS_TSO_CHOP   0x10
#define MXGEFW_FLAGS_TSO_PLD    0x20

#define MXGEFW_SEND_SMALL_SIZE  1520
#define MXGEFW_MAX_MTU          9400

union mcp_pso_or_cumlen {
	u16 pseudo_hdr_offset;
	u16 cum_len;
};

#define	MXGEFW_MAX_SEND_DESC 12
#define MXGEFW_PAD	    2

/* 16 Bytes */
struct mcp_kreq_ether_send {
	__be32 addr_high;
	__be32 addr_low;
	__be16 pseudo_hdr_offset;
	__be16 length;
	u8 pad;
	u8 rdma_count;
	u8 cksum_offset;	/* where to start computing cksum */
	u8 flags;		/* as defined above */
};

/* 8 Bytes */
struct mcp_kreq_ether_recv {
	__be32 addr_high;
	__be32 addr_low;
};

/* Commands */

#define	MXGEFW_BOOT_HANDOFF	0xfc0000
#define	MXGEFW_BOOT_DUMMY_RDMA	0xfc01c0

#define	MXGEFW_ETH_CMD		0xf80000
#define	MXGEFW_ETH_SEND_4	0x200000
#define	MXGEFW_ETH_SEND_1	0x240000
#define	MXGEFW_ETH_SEND_2	0x280000
#define	MXGEFW_ETH_SEND_3	0x2c0000
#define	MXGEFW_ETH_RECV_SMALL	0x300000
#define	MXGEFW_ETH_RECV_BIG	0x340000
#define	MXGEFW_ETH_SEND_GO	0x380000
#define	MXGEFW_ETH_SEND_STOP	0x3C0000

#define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
#define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)

enum myri10ge_mcp_cmd_type {
	MXGEFW_CMD_NONE = 0,
	/* Reset the mcp, it is left in a safe state, waiting
	 * for the driver to set all its parameters */
	MXGEFW_CMD_RESET = 1,

	/* get the version number of the current firmware..
	 * (may be available in the eeprom strings..? */
	MXGEFW_GET_MCP_VERSION = 2,

	/* Parameters which must be set by the driver before it can
	 * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
	 * MXGEFW_CMD_RESET is issued */

	MXGEFW_CMD_SET_INTRQ_DMA = 3,
	/* data0 = LSW of the host address
	 * data1 = MSW of the host address
	 * data2 = slice number if multiple slices are used
	 */

	MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4,	/* in bytes, power of 2 */
	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5,	/* in bytes */

	/* Parameters which refer to lanai SRAM addresses where the
	 * driver must issue PIO writes for various things */

	MXGEFW_CMD_GET_SEND_OFFSET = 6,
	MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7,
	MXGEFW_CMD_GET_BIG_RX_OFFSET = 8,
	/* data0 = slice number if multiple slices are used */

	MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9,
	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10,

	/* Parameters which refer to rings stored on the MCP,
	 * and whose size is controlled by the mcp */

	MXGEFW_CMD_GET_SEND_RING_SIZE = 11,	/* in bytes */
	MXGEFW_CMD_GET_RX_RING_SIZE = 12,	/* in bytes */

	/* Parameters which refer to rings stored in the host,
	 * and whose size is controlled by the host.  Note that
	 * all must be physically contiguous and must contain
	 * a power of 2 number of entries.  */

	MXGEFW_CMD_SET_INTRQ_SIZE = 13,	/* in bytes */
#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK  (1 << 31)

	/* command to bring ethernet interface up.  Above parameters
	 * (plus mtu & mac address) must have been exchanged prior
	 * to issuing this command  */
	MXGEFW_CMD_ETHERNET_UP = 14,

	/* command to bring ethernet interface down.  No further sends
	 * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
	 * is issued, and all interrupt queues must be flushed prior
	 * to ack'ing this command */

	MXGEFW_CMD_ETHERNET_DOWN = 15,

	/* commands the driver may issue live, without resetting
	 * the nic.  Note that increasing the mtu "live" should
	 * only be done if the driver has already supplied buffers
	 * sufficiently large to handle the new mtu.  Decreasing
	 * the mtu live is safe */

	MXGEFW_CMD_SET_MTU = 16,
	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17,	/* in microseconds */
	MXGEFW_CMD_SET_STATS_INTERVAL = 18,	/* in microseconds */
	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19,	/* replaced by SET_STATS_DMA_V2 */

	MXGEFW_ENABLE_PROMISC = 20,
	MXGEFW_DISABLE_PROMISC = 21,
	MXGEFW_SET_MAC_ADDRESS = 22,

	MXGEFW_ENABLE_FLOW_CONTROL = 23,
	MXGEFW_DISABLE_FLOW_CONTROL = 24,

	/* do a DMA test
	 * data0,data1 = DMA address
	 * data2       = RDMA length (MSH), WDMA length (LSH)
	 * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
	 */
	MXGEFW_DMA_TEST = 25,

	MXGEFW_ENABLE_ALLMULTI = 26,
	MXGEFW_DISABLE_ALLMULTI = 27,

	/* returns MXGEFW_CMD_ERROR_MULTICAST
	 * if there is no room in the cache
	 * data0,MSH(data1) = multicast group address */
	MXGEFW_JOIN_MULTICAST_GROUP = 28,
	/* returns MXGEFW_CMD_ERROR_MULTICAST
	 * if the address is not in the cache,
	 * or is equal to FF-FF-FF-FF-FF-FF
	 * data0,MSH(data1) = multicast group address */
	MXGEFW_LEAVE_MULTICAST_GROUP = 29,
	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30,

	MXGEFW_CMD_SET_STATS_DMA_V2 = 31,
	/* data0, data1 = bus addr,
	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
	 * adding new stuff to mcp_irq_data without changing the ABI
	 *
	 * If multiple slices are used, data2 contains both the size of the
	 * structure (in the lower 16 bits) and the slice number
	 * (in the upper 16 bits).
	 */

	MXGEFW_CMD_UNALIGNED_TEST = 32,
	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
	 * chipset */

	MXGEFW_CMD_UNALIGNED_STATUS = 33,
	/* return data = boolean, true if the chipset is known to be unaligned */

	MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34,
	/* data0 = number of big buffers to use.  It must be 0 or a power of 2.
	 * 0 indicates that the NIC consumes as many buffers as they are required
	 * for packet. This is the default behavior.
	 * A power of 2 number indicates that the NIC always uses the specified
	 * number of buffers for each big receive packet.
	 * It is up to the driver to ensure that this value is big enough for
	 * the NIC to be able to receive maximum-sized packets.
	 */

	MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35,
	MXGEFW_CMD_ENABLE_RSS_QUEUES = 36,
	/* data0 = number of slices n (0, 1, ..., n-1) to enable
	 * data1 = interrupt mode | use of multiple transmit queues.
	 * 0=share one INTx/MSI.
	 * 1=use one MSI-X per queue.
	 * If all queues share one interrupt, the driver must have set
	 * RSS_SHARED_INTERRUPT_DMA before enabling queues.
	 * 2=enable both receive and send queues.
	 * Without this bit set, only one send queue (slice 0's send queue)
	 * is enabled.  The receive queues are always enabled.
	 */
#define MXGEFW_SLICE_INTR_MODE_SHARED          0x0
#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE   0x1
#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2

	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37,
	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38,
	/* data0, data1 = bus address lsw, msw */
	MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39,
	/* get the offset of the indirection table */
	MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40,
	/* set the size of the indirection table */
	MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41,
	/* get the offset of the secret key */
	MXGEFW_CMD_RSS_KEY_UPDATED = 42,
	/* tell nic that the secret key's been updated */
	MXGEFW_CMD_SET_RSS_ENABLE = 43,
	/* data0 = enable/disable rss
	 * 0: disable rss.  nic does not distribute receive packets.
	 * 1: enable rss.  nic distributes receive packets among queues.
	 * data1 = hash type
	 * 1: IPV4            (required by RSS)
	 * 2: TCP_IPV4        (required by RSS)
	 * 3: IPV4 | TCP_IPV4 (required by RSS)
	 * 4: source port
	 * 5: source port + destination port
	 */
#define MXGEFW_RSS_HASH_TYPE_IPV4      0x1
#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4  0x2
#define MXGEFW_RSS_HASH_TYPE_SRC_PORT  0x4
#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
#define MXGEFW_RSS_HASH_TYPE_MAX 0x5

	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44,
	/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
	 * If the header size of a IPv6 TSO packet is larger than the specified
	 * value, then the driver must not use TSO.
	 * This size restriction only applies to IPv6 TSO.
	 * For IPv4 TSO, the maximum size of the headers is fixed, and the NIC
	 * always has enough header buffer to store maximum-sized headers.
	 */

	MXGEFW_CMD_SET_TSO_MODE = 45,
	/* data0 = TSO mode.
	 * 0: Linux/FreeBSD style (NIC default)
	 * 1: NDIS/NetBSD style
	 */
#define MXGEFW_TSO_MODE_LINUX  0
#define MXGEFW_TSO_MODE_NDIS   1

	MXGEFW_CMD_MDIO_READ = 46,
	/* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
	MXGEFW_CMD_MDIO_WRITE = 47,
	/* data0 = dev_addr,  data1 = register/addr, data2 = value  */

	MXGEFW_CMD_I2C_READ = 48,
	/* Starts to get a fresh copy of one byte or of the module i2c table, the
	 * obtained data is cached inside the xaui-xfi chip :
	 *   data0 :  0 => get one byte, 1=> get 256 bytes
	 *   data1 :  If data0 == 0: location to refresh
	 *               bit 7:0  register location
	 *               bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1)
	 *               bit 23:16 is the i2c bus number (for multi-port NICs)
	 *            If data0 == 1: unused
	 * The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes
	 * During the i2c operation,  MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts
	 *  will return MXGEFW_CMD_ERROR_BUSY
	 */
	MXGEFW_CMD_I2C_BYTE = 49,
	/* Return the last obtained copy of a given byte in the xfp i2c table
	 * (copy cached during the last relevant MXGEFW_CMD_I2C_READ)
	 *   data0 : index of the desired table entry
	 *  Return data = the byte stored at the requested index in the table
	 */

	MXGEFW_CMD_GET_VPUMP_OFFSET = 50,
	/* Return data = NIC memory offset of mcp_vpump_public_global */
	MXGEFW_CMD_RESET_VPUMP = 51,
	/* Resets the VPUMP state */

	MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52,
	/* data0 = mcp_slot type to use.
	 * 0 = the default 4B mcp_slot
	 * 1 = 8B mcp_slot_8
	 */
#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN        0
#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH  1

	MXGEFW_CMD_SET_THROTTLE_FACTOR = 53,
	/* set the throttle factor for ethp_z8e
	 * data0 = throttle_factor
	 * throttle_factor = 256 * pcie-raw-speed / tx_speed
	 * tx_speed = 256 * pcie-raw-speed / throttle_factor
	 *
	 * For PCI-E x8: pcie-raw-speed == 16Gb/s
	 * For PCI-E x4: pcie-raw-speed == 8Gb/s
	 *
	 * ex1: throttle_factor == 0x1a0 (416), tx_speed == 1.23GB/s == 9.846 Gb/s
	 * ex2: throttle_factor == 0x200 (512), tx_speed == 1.0GB/s == 8 Gb/s
	 *
	 * with tx_boundary == 2048, max-throttle-factor == 8191 => min-speed == 500Mb/s
	 * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
	 */

	MXGEFW_CMD_VPUMP_UP = 54,
	/* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
	MXGEFW_CMD_GET_VPUMP_CLK = 55,
	/* Get the lanai clock */

	MXGEFW_CMD_GET_DCA_OFFSET = 56,
	/* offset of dca control for WDMAs */

	/* VMware NetQueue commands */
	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57,
	MXGEFW_CMD_NETQ_ADD_FILTER = 58,
	/* data0 = filter_id << 16 | queue << 8 | type */
	/* data1 = MS4 of MAC Addr */
	/* data2 = LS2_MAC << 16 | VLAN_tag */
	MXGEFW_CMD_NETQ_DEL_FILTER = 59,
	/* data0 = filter_id */
	MXGEFW_CMD_NETQ_QUERY1 = 60,
	MXGEFW_CMD_NETQ_QUERY2 = 61,
	MXGEFW_CMD_NETQ_QUERY3 = 62,
	MXGEFW_CMD_NETQ_QUERY4 = 63,

	MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64,
	/* When set, small receive buffers can cross page boundaries.
	 * Both small and big receive buffers may start at any address.
	 * This option has performance implications, so use with caution.
	 */
};

enum myri10ge_mcp_cmd_status {
	MXGEFW_CMD_OK = 0,
	MXGEFW_CMD_UNKNOWN = 1,
	MXGEFW_CMD_ERROR_RANGE = 2,
	MXGEFW_CMD_ERROR_BUSY = 3,
	MXGEFW_CMD_ERROR_EMPTY = 4,
	MXGEFW_CMD_ERROR_CLOSED = 5,
	MXGEFW_CMD_ERROR_HASH_ERROR = 6,
	MXGEFW_CMD_ERROR_BAD_PORT = 7,
	MXGEFW_CMD_ERROR_RESOURCES = 8,
	MXGEFW_CMD_ERROR_MULTICAST = 9,
	MXGEFW_CMD_ERROR_UNALIGNED = 10,
	MXGEFW_CMD_ERROR_NO_MDIO = 11,
	MXGEFW_CMD_ERROR_I2C_FAILURE = 12,
	MXGEFW_CMD_ERROR_I2C_ABSENT = 13,
	MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14
};

#define MXGEFW_OLD_IRQ_DATA_LEN 40

struct mcp_irq_data {
	/* add new counters at the beginning */
	__be32 future_use[1];
	__be32 dropped_pause;
	__be32 dropped_unicast_filtered;
	__be32 dropped_bad_crc32;
	__be32 dropped_bad_phy;
	__be32 dropped_multicast_filtered;
	/* 40 Bytes */
	__be32 send_done_count;

#define MXGEFW_LINK_DOWN 0
#define MXGEFW_LINK_UP 1
#define MXGEFW_LINK_MYRINET 2
#define MXGEFW_LINK_UNKNOWN 3
	__be32 link_up;
	__be32 dropped_link_overflow;
	__be32 dropped_link_error_or_filtered;
	__be32 dropped_runt;
	__be32 dropped_overrun;
	__be32 dropped_no_small_buffer;
	__be32 dropped_no_big_buffer;
	__be32 rdma_tags_available;

	u8 tx_stopped;
	u8 link_down;
	u8 stats_updated;
	u8 valid;
};

/* definitions for NETQ filter type */
#define MXGEFW_NETQ_FILTERTYPE_NONE 0
#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3

#endif				/* __MYRI10GE_MCP_H__ */