[Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel boots.

Reprogram DDR EBIU register properly for bf548.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

4 files changed, 153 insertions, 5 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 5ebcfd226ed8..1364dcaccc18 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -317,7 +317,7 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if BFIN537_BLUETECHNIX_CM
 	default "20" if BFIN561_BLUETECHNIX_CM
@@ -354,7 +354,7 @@ config SCLK_DIV
 	range 1 15
 	default 5 if BFIN533_EZKIT
 	default 5 if BFIN533_STAMP
-	default 4 if (BFIN537_STAMP || BFIN527_EZKIT)
+	default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
 	default 5 if BFIN533_BLUETECHNIX_CM
 	default 4 if BFIN537_BLUETECHNIX_CM
 	default 4 if BFIN561_BLUETECHNIX_CM
@@ -409,6 +409,7 @@ config MEM_SIZE
 	default  32 if BFIN533_EZKIT
 	default  64 if BFIN527_EZKIT
 	default  64 if BFIN537_STAMP
+	default  64 if BFIN548_EZKIT
 	default  64 if BFIN561_EZKIT
 	default 128 if BFIN533_STAMP
 	default  64 if PNAV10
@@ -416,6 +417,7 @@ config MEM_SIZE
 
 config MEM_ADD_WIDTH
 	int "SDRAM Memory Address Width"
+	depends on (!BF54x)
 	default  9 if BFIN533_EZKIT
 	default  9 if BFIN561_EZKIT
 	default  9 if H8606_HVSISTEMAS
@@ -424,6 +426,19 @@ config MEM_ADD_WIDTH
 	default 11 if BFIN533_STAMP
 	default 10 if PNAV10
 
+
+choice
+	prompt "DDR SDRAM Chip Type"
+	depends on BFIN548_EZKIT
+	default MEM_MT46V32M16_5B
+
+config MEM_MT46V32M16_6T
+        bool "MT46V32M16_6T"
+
+config MEM_MT46V32M16_5B
+        bool "MT46V32M16_5B"
+endchoice
+
 config ENET_FLASH_PIN
 	int "PF port/pin used for flash and ethernet sharing"
 	depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 745662e88759..74fe258421a5 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -324,12 +324,25 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
+#if defined(CONFIG_BF54x)
+	P2.H = hi(EBIU_RSTCTL);
+	P2.L = lo(EBIU_RSTCTL);
+	R0 = [P2];
+	BITSET (R0, 3);
+#else
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
 	BITSET (R0, 24);
+#endif
 	[P2] = R0;
 	SSYNC;
+#if defined(CONFIG_BF54x)
+.LSRR_MODE:
+	R0 = [P2];
+	CC = BITTST(R0, 4);
+	if !CC JUMP .LSRR_MODE;
+#endif
 
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
@@ -361,6 +374,39 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
+#if defined(CONFIG_BF54x)
+	P2.H = hi(EBIU_RSTCTL);
+	P2.L = lo(EBIU_RSTCTL);
+	R0 = [P2];
+	CC = BITTST(R0, 0);
+	if CC jump .Lskipddrrst;
+	BITSET (R0, 0);
+.Lskipddrrst:
+	BITCLR (R0, 3);
+	[P2] = R0;
+	SSYNC;
+
+	p0.l = lo(EBIU_DDRCTL0);
+	p0.h = hi(EBIU_DDRCTL0);
+	r0.l = lo(mem_DDRCTL0);
+	r0.h = hi(mem_DDRCTL0);
+	[p0] = r0;
+	ssync;
+
+	p0.l = lo(EBIU_DDRCTL1);
+	p0.h = hi(EBIU_DDRCTL1);
+	r0.l = lo(mem_DDRCTL1);
+	r0.h = hi(mem_DDRCTL1);
+	[p0] = r0;
+	ssync;
+
+	p0.l = lo(EBIU_DDRCTL2);
+	p0.h = hi(EBIU_DDRCTL2);
+	r0.l = lo(mem_DDRCTL2);
+	r0.h = hi(mem_DDRCTL2);
+	[p0] = r0;
+	ssync;
+#else
 	p0.l = lo(EBIU_SDRRC);
 	p0.h = hi(EBIU_SDRRC);
 	r0 = mem_SDRRC;
@@ -394,6 +440,7 @@ ENTRY(_start_dma_code)
 	R1 = R1 | R0;
 	[P2] = R1;
 	SSYNC;
+#endif
 
 	p0.h = hi(SIC_IWR0);
 	p0.l = lo(SIC_IWR0);
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 319a48590c9c..08f90c21fe8a 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -1772,17 +1772,36 @@
 #define                       TRP  0x3c0000   /* Pre charge-to-active command period */
 #define                      TRAS  0x3c00000  /* Min Active-to-pre charge time */
 #define                       TRC  0x3c000000 /* Active-to-active time */
+#define DDR_TRAS(x)		((x<<22)&TRAS)	/* DDR tRAS = (1~15) cycles */
+#define DDR_TRP(x)		((x<<18)&TRP)	/* DDR tRP = (1~15) cycles */
+#define DDR_TRC(x)		((x<<26)&TRC)	/* DDR tRC = (1~15) cycles */
+#define DDR_TRFC(x)		((x<<14)&TRFC)	/* DDR tRFC = (1~15) cycles */
+#define DDR_TREFI(x)		(x&TREFI)	/* DDR tRFC = (1~15) cycles */
 
 /* Bit masks for EBIU_DDRCTL1 */
 
 #define                      TRCD  0xf        /* Active-to-Read/write delay */
-#define                       MRD  0xf0       /* Mode register set to active */
+#define                      TMRD  0xf0       /* Mode register set to active */
 #define                       TWR  0x300      /* Write Recovery time */
 #define               DDRDATWIDTH  0x3000     /* DDR data width */
 #define                  EXTBANKS  0xc000     /* External banks */
 #define               DDRDEVWIDTH  0x30000    /* DDR device width */
 #define                DDRDEVSIZE  0xc0000    /* DDR device size */
-#define                     TWWTR  0xf0000000 /* Write-to-read delay */
+#define                      TWTR  0xf0000000 /* Write-to-read delay */
+#define DDR_TWTR(x)		((x<<28)&TWTR)	/* DDR tWTR = (1~15) cycles */
+#define DDR_TMRD(x)		((x<<4)&TMRD)	/* DDR tMRD = (1~15) cycles */
+#define DDR_TWR(x)		((x<<8)&TWR)	/* DDR tWR = (1~15) cycles */
+#define DDR_TRCD(x)		(x&TRCD)	/* DDR tRCD = (1~15) cycles */
+#define DDR_DATWIDTH		0x2000		/* DDR data width */
+#define EXTBANK_1		0		/* 1 external bank */
+#define EXTBANK_2		0x4000		/* 2 external banks */
+#define DEVSZ_64		0x40000		/* DDR External Bank Size = 64MB */
+#define DEVSZ_128		0x80000		/* DDR External Bank Size = 128MB */
+#define DEVSZ_256		0xc0000		/* DDR External Bank Size = 256MB */
+#define DEVSZ_512		0		/* DDR External Bank Size = 512MB */
+#define DEVWD_4			0		/* DDR Device Width = 4 Bits    */
+#define DEVWD_8			0x10000		/* DDR Device Width = 8 Bits    */
+#define DEVWD_16		0x20000		/* DDR Device Width = 16 Bits    */
 
 /* Bit masks for EBIU_DDRCTL2 */
 
@@ -1790,6 +1809,10 @@
 #define                CASLATENCY  0x70       /* CAS latency */
 #define                  DLLRESET  0x100      /* DLL Reset */
 #define                      REGE  0x1000     /* Register mode enable */
+#define CL_1_5			0x50		/* DDR CAS Latency = 1.5 cycles */
+#define CL_2			0x20		/* DDR CAS Latency = 2 cycles */
+#define CL_2_5			0x60		/* DDR CAS Latency = 2.5 cycles */
+#define CL_3			0x30		/* DDR CAS Latency = 3 cycles */
 
 /* Bit masks for EBIU_DDRCTL3 */
 
@@ -2257,6 +2280,10 @@
 
 #define                      CSEL  0x30       /* Core Select */
 #define                      SSEL  0xf        /* System Select */
+#define			CSEL_DIV1	0x0000	/* CCLK = VCO / 1 */
+#define			CSEL_DIV2	0x0010	/* CCLK = VCO / 2 */
+#define			CSEL_DIV4	0x0020	/* CCLK = VCO / 4 */
+#define			CSEL_DIV8	0x0030	/* CCLK = VCO / 8 */
 
 /* Bit masks for PLL_CTL */
 
diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h
index e792eb7ae6a0..befc2903d5a5 100644
--- a/include/asm-blackfin/mach-bf548/mem_init.h
+++ b/include/asm-blackfin/mach-bf548/mem_init.h
@@ -28,10 +28,69 @@
  * If not, write to the Free Software Foundation,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#define MIN_DDR_SCLK(x)	(x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
 
-#if (CONFIG_MEM_MT46V32M16)
+#if (CONFIG_MEM_MT46V32M16_6T)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(60))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(42))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(72))
+#define DDR_tREFI	DDR_TREFI(MIN_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(1)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(12))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_MT46V32M16_5B)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(55))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(40))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(70))
+#define DDR_tREFI	DDR_TREFI(MIN_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(2)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(10))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+
+#define DDR_tRCD	DDR_TRCD(3)
+#define DDR_tWTR	DDR_TWTR(2)
+#define DDR_tWR		DDR_TWR(2)
+#define DDR_tMRD	DDR_TMRD(2)
+#define DDR_tRP		DDR_TRP(3)
+#define DDR_tRAS	DDR_TRAS(7)
+#define DDR_tRC		DDR_TRC(10)
+#define DDR_tRFC	DDR_TRFC(12)
+#define DDR_tREFI	DDR_TREFI(1288)
 #endif
 
+#if (CONFIG_SCLK_HZ <= 133333333)
+#define	DDR_CL		CL_2
+#elif (CONFIG_SCLK_HZ <= 166666666)
+#define	DDR_CL		CL_2_5
+#else
+#define	DDR_CL		CL_3
+#endif
+
+#define mem_DDRCTL0	(DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
+#define mem_DDRCTL1	(DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
+			| DDR_tMRD | DDR_tWR | DDR_tRCD)
+#define mem_DDRCTL2	DDR_CL
+
+
 #if defined CONFIG_CLKIN_HALF
 #define CLKIN_HALF       1
 #else