AT91: add touchscreen support for at91sam9g45ekes

New at91sam9g45ekes board provides a LCD with resistive touchscreen.
This is the support of this feature by atmel_tsadcc driver. This also
sets up platform parameters to be passed to the driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 64 insertions, 1 deletions

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784050b2..a5a4eb19fbbe 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -810,6 +810,57 @@ static void __init at91_add_device_rtc(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9g45_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
+	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
+	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
+	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
+
+	tsadcc_data = *data;
+	platform_device_register(&at91sam9g45_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843f323d..3d6764b3ad7a 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 300000,
+	.pendet_debounce	= 0x0d,
+	.ts_sample_hold_time	= 0x0a,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -378,6 +388,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(0, NULL, 0);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen */
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1cd9e8c8efb3..aebea71ff02a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -309,7 +309,7 @@ config TOUCHSCREEN_TOUCHWIN
 
 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
-	depends on ARCH_AT91SAM9RL
+	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  Say Y here if you have a 4-wire touchscreen connected to the
           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).