Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...

1 files changed, 0 insertions, 490 deletions

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
deleted file mode 100644
index b0198a1cf403..000000000000
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ /dev/null
@@ -1,490 +0,0 @@
-=================
-ARM CPUs bindings
-=================
-
-The device tree allows to describe the layout of CPUs in a system through
-the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-defining properties for every cpu.
-
-Bindings for CPU nodes follow the Devicetree Specification, available from:
-
-https://www.devicetree.org/specifications/
-
-with updates for 32-bit and 64-bit ARM systems provided in this document.
-
-================================
-Convention used in this document
-================================
-
-This document follows the conventions described in the Devicetree
-Specification, with the addition:
-
-- square brackets define bitfields, eg reg[7:0] value of the bitfield in
-  the reg property contained in bits 7 down to 0
-
-=====================================
-cpus and cpu node bindings definition
-=====================================
-
-The ARM architecture, in accordance with the Devicetree Specification,
-requires the cpus and cpu nodes to be present and contain the properties
-described below.
-
-- cpus node
-
-	Description: Container of cpu nodes
-
-	The node name must be "cpus".
-
-	A cpus node must define the following properties:
-
-	- #address-cells
-		Usage: required
-		Value type: <u32>
-
-		Definition depends on ARM architecture version and
-		configuration:
-
-			# On uniprocessor ARM architectures previous to v7
-			  value must be 1, to enable a simple enumeration
-			  scheme for processors that do not have a HW CPU
-			  identification register.
-			# On 32-bit ARM 11 MPcore, ARM v7 or later systems
-			  value must be 1, that corresponds to CPUID/MPIDR
-			  registers sizes.
-			# On ARM v8 64-bit systems value should be set to 2,
-			  that corresponds to the MPIDR_EL1 register size.
-			  If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
-			  in the system, #address-cells can be set to 1, since
-			  MPIDR_EL1[63:32] bits are not used for CPUs
-			  identification.
-	- #size-cells
-		Usage: required
-		Value type: <u32>
-		Definition: must be set to 0
-
-- cpu node
-
-	Description: Describes a CPU in an ARM based system
-
-	PROPERTIES
-
-	- device_type
-		Usage: required
-		Value type: <string>
-		Definition: must be "cpu"
-	- reg
-		Usage and definition depend on ARM architecture version and
-		configuration:
-
-			# On uniprocessor ARM architectures previous to v7
-			  this property is required and must be set to 0.
-
-			# On ARM 11 MPcore based systems this property is
-			  required and matches the CPUID[11:0] register bits.
-
-			  Bits [11:0] in the reg cell must be set to
-			  bits [11:0] in CPU ID register.
-
-			  All other bits in the reg cell must be set to 0.
-
-			# On 32-bit ARM v7 or later systems this property is
-			  required and matches the CPU MPIDR[23:0] register
-			  bits.
-
-			  Bits [23:0] in the reg cell must be set to
-			  bits [23:0] in MPIDR.
-
-			  All other bits in the reg cell must be set to 0.
-
-			# On ARM v8 64-bit systems this property is required
-			  and matches the MPIDR_EL1 register affinity bits.
-
-			  * If cpus node's #address-cells property is set to 2
-
-			    The first reg cell bits [7:0] must be set to
-			    bits [39:32] of MPIDR_EL1.
-
-			    The second reg cell bits [23:0] must be set to
-			    bits [23:0] of MPIDR_EL1.
-
-			  * If cpus node's #address-cells property is set to 1
-
-			    The reg cell bits [23:0] must be set to bits [23:0]
-			    of MPIDR_EL1.
-
-			  All other bits in the reg cells must be set to 0.
-
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: should be one of:
-			    "arm,arm710t"
-			    "arm,arm720t"
-			    "arm,arm740t"
-			    "arm,arm7ej-s"
-			    "arm,arm7tdmi"
-			    "arm,arm7tdmi-s"
-			    "arm,arm9es"
-			    "arm,arm9ej-s"
-			    "arm,arm920t"
-			    "arm,arm922t"
-			    "arm,arm925"
-			    "arm,arm926e-s"
-			    "arm,arm926ej-s"
-			    "arm,arm940t"
-			    "arm,arm946e-s"
-			    "arm,arm966e-s"
-			    "arm,arm968e-s"
-			    "arm,arm9tdmi"
-			    "arm,arm1020e"
-			    "arm,arm1020t"
-			    "arm,arm1022e"
-			    "arm,arm1026ej-s"
-			    "arm,arm1136j-s"
-			    "arm,arm1136jf-s"
-			    "arm,arm1156t2-s"
-			    "arm,arm1156t2f-s"
-			    "arm,arm1176jzf"
-			    "arm,arm1176jz-s"
-			    "arm,arm1176jzf-s"
-			    "arm,arm11mpcore"
-			    "arm,cortex-a5"
-			    "arm,cortex-a7"
-			    "arm,cortex-a8"
-			    "arm,cortex-a9"
-			    "arm,cortex-a12"
-			    "arm,cortex-a15"
-			    "arm,cortex-a17"
-			    "arm,cortex-a53"
-			    "arm,cortex-a57"
-			    "arm,cortex-a72"
-			    "arm,cortex-a73"
-			    "arm,cortex-m0"
-			    "arm,cortex-m0+"
-			    "arm,cortex-m1"
-			    "arm,cortex-m3"
-			    "arm,cortex-m4"
-			    "arm,cortex-r4"
-			    "arm,cortex-r5"
-			    "arm,cortex-r7"
-			    "brcm,brahma-b15"
-			    "brcm,brahma-b53"
-			    "brcm,vulcan"
-			    "cavium,thunder"
-			    "cavium,thunder2"
-			    "faraday,fa526"
-			    "intel,sa110"
-			    "intel,sa1100"
-			    "marvell,feroceon"
-			    "marvell,mohawk"
-			    "marvell,pj4a"
-			    "marvell,pj4b"
-			    "marvell,sheeva-v5"
-			    "nvidia,tegra132-denver"
-			    "nvidia,tegra186-denver"
-			    "nvidia,tegra194-carmel"
-			    "qcom,krait"
-			    "qcom,kryo"
-			    "qcom,kryo385"
-			    "qcom,scorpion"
-	- enable-method
-		Value type: <stringlist>
-		Usage and definition depend on ARM architecture version.
-			# On ARM v8 64-bit this property is required and must
-			  be one of:
-			     "psci"
-			     "spin-table"
-			# On ARM 32-bit systems this property is optional and
-			  can be one of:
-			    "actions,s500-smp"
-			    "allwinner,sun6i-a31"
-			    "allwinner,sun8i-a23"
-			    "allwinner,sun9i-a80-smp"
-			    "amlogic,meson8-smp"
-			    "amlogic,meson8b-smp"
-			    "arm,realview-smp"
-			    "brcm,bcm11351-cpu-method"
-			    "brcm,bcm23550"
-			    "brcm,bcm2836-smp"
-			    "brcm,bcm-nsp-smp"
-			    "brcm,brahma-b15"
-			    "marvell,armada-375-smp"
-			    "marvell,armada-380-smp"
-			    "marvell,armada-390-smp"
-			    "marvell,armada-xp-smp"
-			    "marvell,98dx3236-smp"
-			    "mediatek,mt6589-smp"
-			    "mediatek,mt81xx-tz-smp"
-			    "qcom,gcc-msm8660"
-			    "qcom,kpss-acc-v1"
-			    "qcom,kpss-acc-v2"
-			    "renesas,apmu"
-			    "renesas,r9a06g032-smp"
-			    "rockchip,rk3036-smp"
-			    "rockchip,rk3066-smp"
-			    "ste,dbx500-smp"
-
-	- cpu-release-addr
-		Usage: required for systems that have an "enable-method"
-		       property value of "spin-table".
-		Value type: <prop-encoded-array>
-		Definition:
-			# On ARM v8 64-bit systems must be a two cell
-			  property identifying a 64-bit zero-initialised
-			  memory location.
-
-	- qcom,saw
-		Usage: required for systems that have an "enable-method"
-		       property value of "qcom,kpss-acc-v1" or
-		       "qcom,kpss-acc-v2"
-		Value type: <phandle>
-		Definition: Specifies the SAW[1] node associated with this CPU.
-
-	- qcom,acc
-		Usage: required for systems that have an "enable-method"
-		       property value of "qcom,kpss-acc-v1" or
-		       "qcom,kpss-acc-v2"
-		Value type: <phandle>
-		Definition: Specifies the ACC[2] node associated with this CPU.
-
-	- cpu-idle-states
-		Usage: Optional
-		Value type: <prop-encoded-array>
-		Definition:
-			# List of phandles to idle state nodes supported
-			  by this cpu [3].
-
-	- capacity-dmips-mhz
-		Usage: Optional
-		Value type: <u32>
-		Definition:
-			# u32 value representing CPU capacity [4] in
-			  DMIPS/MHz, relative to highest capacity-dmips-mhz
-			  in the system.
-
-	- rockchip,pmu
-		Usage: optional for systems that have an "enable-method"
-		       property value of "rockchip,rk3066-smp"
-		       While optional, it is the preferred way to get access to
-		       the cpu-core power-domains.
-		Value type: <phandle>
-		Definition: Specifies the syscon node controlling the cpu core
-			    power domains.
-
-	- dynamic-power-coefficient
-		Usage: optional
-		Value type: <prop-encoded-array>
-		Definition: A u32 value that represents the running time dynamic
-			    power coefficient in units of uW/MHz/V^2. The
-			    coefficient can either be calculated from power
-			    measurements or derived by analysis.
-
-			    The dynamic power consumption of the CPU  is
-			    proportional to the square of the Voltage (V) and
-			    the clock frequency (f). The coefficient is used to
-			    calculate the dynamic power as below -
-
-			    Pdyn = dynamic-power-coefficient * V^2 * f
-
-			    where voltage is in V, frequency is in MHz.
-
-Example 1 (dual-cluster big.LITTLE system 32-bit):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-		};
-	};
-
-Example 2 (Cortex-A8 uniprocessor 32-bit system):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			reg = <0x0>;
-		};
-	};
-
-Example 4 (ARM Cortex-A57 64-bit system):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <2>;
-
-	cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-};
-
---
-[1] arm/msm/qcom,saw2.txt
-[2] arm/msm/qcom,kpss-acc.txt
-[3] ARM Linux kernel documentation - idle states bindings
-    Documentation/devicetree/bindings/arm/idle-states.txt
-[4] ARM Linux kernel documentation - cpu capacity bindings
-    Documentation/devicetree/bindings/arm/cpu-capacity.txt