Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.21 kernel series.

  Core changes:

   - Some core changes are already in outside of this pull request as
     they came through the regulator tree, most notably
     devm_gpiod_unhinge() that removes devres refcount management from a
     GPIO descriptor. This is needed in subsystems such as regulators
     where the regulator core need to take over the reference counting
     and lifecycle management for a GPIO descriptor.

   - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as
     nothing needs it. We can bring it back if need be.

   - Add a global TODO so people see where we are going. This helps
     setting the direction now that we are two GPIO maintainers.

   - Handle the MMC CD/WP properties in the device tree core. (The bulk
     of patches activating this code is already merged through the
     MMC/SD tree.)

   - Augment gpiochip_request_own_desc() to pass a flag so we as
     gpiochips can request lines as active low or open drain etc even
     from ourselves.

  New drivers:

   - New driver for Cadence GPIO blocks.

   - New driver for Atmel SAMA5D2 PIOBU GPIO lines.

  Driver improvements:

   - A major refactoring of the PCA953x driver - this driver has been
     around for ages, and is now modernized to reduce code duplication
     that has stacked up and is using regmap to read write and cache
     registers.

   - Intel drivers are now maintained in a separate tree and start with
     a round of cleanups and unifications"

* tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits)
  gpio: sama5d2-piobu: Depend on OF_GPIO
  gpio: Add Cadence GPIO driver
  dt-bindings: gpio: Add bindings for Cadence GPIO
  gpiolib-acpi: remove unused variable 'err', cleans up build warning
  gpio: mxs: read pin level directly instead of using .get
  gpio: aspeed: remove duplicated statement
  gpio: add driver for SAMA5D2 PIOBU pins
  dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller
  gpio/mmc/of: Respect polarity in the device tree
  dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support
  memory: omap-gpmc: Get the header of the enum
  ARM: omap1: Fix new user of gpiochip_request_own_desc()
  gpio: pca953x: Add regmap dependency for PCA953x driver
  gpio: raspberrypi-exp: decrease refcount on firmware dt node
  gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
  gpio: pca953x: Restore registers after suspend/resume cycle
  gpio: pca953x: Zap single use of pca953x_read_single()
  gpio: pca953x: Zap ad-hoc reg_output cache
  gpio: pca953x: Zap ad-hoc reg_direction cache
  gpio: pca953x: Perform basic regmap conversion
  ...

1 files changed, 11 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 4b96608ad692..14f319f694b7 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -158,14 +158,24 @@ Security Module (SECUMOD)
 
 The Security Module macrocell provides all necessary secure functions to avoid
 voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
+embeds secure memories that can be scrambled.
+
+The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+Note that they maintain their voltage during Backup/Self-refresh.
 
 required properties:
 - compatible: Should be "atmel,<chip>-secumod", "syscon".
   <chip> can be "sama5d2".
 - reg: Should contain registers location and length
+- gpio-controller:	Marks the port as GPIO controller.
+- #gpio-cells:		There are 2. The pin number is the
+			first, the second represents additional
+			parameters such as GPIO_ACTIVE_HIGH/LOW.
+
 
 	secumod@fc040000 {
 		compatible = "atmel,sama5d2-secumod", "syscon";
 		reg = <0xfc040000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};