Merge tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no intensive changes in both ALSA and ASoC core parts while
  rather most of changes are a bunch of driver fixes and updates. A
  large diff pattern appears in ASoC TI part which now merges both OMAP
  and DaVinci stuff, but the rest spreads allover the places.

  Note that this pull request includes also some updates for LED trigger
  and platform drivers for mute LEDs, appearing in the diffstat as well.

  Some highlights:

  ASoC:
   - Preparatory work for merging the audio-graph and audio-graph-scu
     cards
   - A merge of TI OMAP and DaVinci directories, as both product lines
     get merged together. Also including a few architecture changes as
     well.
   - Major cleanups of the Maxim MAX9867 driver
   - Small fixes for tablets & co with Intel BYT/CHT chips
   - Lots of rsnd updates as usual
   - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
     RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
     I2S controllers

  HD-audio:
   - Introduce audio-mute LED trigger for replacing the former hackish
     dynamic binding
   - Huawei WMI hotkey and mute LED support
   - Refactoring of PM code and display power controls
   - Headset button support in the generic jack code
   - A few updates for Tegra
   - Fixups for HP EliteBook and ASUS UX391UA
   - Lots of updates for Intel ASoC HD-audio, including the improved DSP
     detection and the fallback binding from ASoC SST to legacy HD-audio
     controller drivers

  Others:
   - Updates for FireWire TASCAM and Fireface devices, some other fixes
   - A few potential Spectre v1 fixes that are all trivial"

* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
  ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
  ALSA: HDA: export process_unsol_events()
  ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
  ALSA: bebob: fix model-id of unit for Apogee Ensemble
  ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
  ALSA: rme9652: Fix potential Spectre v1 vulnerability
  ASoC: ti: Kconfig: Remove the deprecated options
  ARM: davinci_all_defconfig: Update the audio options
  ARM: omap1_defconfig: Do not select ASoC by default
  ARM: omap2plus_defconfig: Update the audio options
  ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
  ARM: OMAP2: Update for new MCBSP Kconfig option
  ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
  MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
  ASoC: ti: Merge davinci and omap directories
  ALSA: hda: add mute LED support for HP EliteBook 840 G4
  ALSA: fireface: code refactoring to handle model-specific registers
  ALSA: fireface: add support for packet streaming on Fireface 800
  ALSA: fireface: allocate isochronous resources in mode-specific implementation
  ...

1 files changed, 237 insertions, 158 deletions

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index d92b705e7917..648d43e1b1e9 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -39,15 +39,7 @@ This is example of
 Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
 Capture:  [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
 
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&ssi0 &src2 &dvc0>;
-				capture  = <&ssi1 &src3 &dvc1>;
-			};
-		};
-	};
+see "Example: simple sound card"
 
 You can use below.
 ${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
@@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
 **     Asynchronous mode
 ------------------
 
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
-	sound {
-		compatible = "simple-scu-audio-card";
-		...
-		/*
-		 * SRC Asynchronous mode setting
-		 * Playback:
-		 * All input data will be converted to 48kHz
-		 * Capture:
-		 * Inputed 48kHz data will be converted to
-		 * system specified Hz
-		 */
-		simple-audio-card,convert-rate = <48000>;
-		...
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for Asynchronous mode"
 
 ------------------
 **     Synchronous mode
@@ -141,26 +112,8 @@ For more detail information, see below
 	${LINUX}/sound/soc/sh/rcar/ctu.c
 	 - comment of header
 
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
-	sound {
-		compatible = "simple-scu-audio-card";
-		...
-		/*
-		 * CTU setting
-		 * All input data will be converted to 2ch
-		 * as output data
-		 */
-		simple-audio-card,convert-channels = <2>;
-		...
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for channel convert"
 
 Ex) Exchange output channel
  Input -> Output
@@ -190,42 +143,13 @@ and these sounds will be merged by MIX.
 	aplay -D plughw:0,0 xxxx.wav &
 	aplay -D plughw:0,1 yyyy.wav
 
-You need to use "simple-scu-audio-card" sound card for it.
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
 Ex)
 	[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
 	                            |
 	[MEM] -> [SRC2] -> [CTU03] -+
 
-	sound {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "simple-scu-audio-card";
-		...
-		simple-audio-card,cpu@0 {
-			reg = <0>;
-			sound-dai = <&rcar_sound 0>;
-		};
-		simple-audio-card,cpu@1 {
-			reg = <1>;
-			sound-dai = <&rcar_sound 1>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
-
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
-			};
-			dai1 {
-				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
-			};
-		};
-	};
+see "Example: simple sound card for MIXer"
 
 =============================================
 * DVC (Digital Volume and Mute Function)
@@ -257,15 +181,31 @@ Volume Ramp
 * SSIU (Serial Sound Interface Unit)
 =============================================
 
-There is no DT settings for SSIU, because SSIU will be automatically
-selected via SSI.
 SSIU can avoid some under/over run error, because it has some buffer.
 But you can't use it if SSI was PIO mode.
-In DMA mode, you can select not to use SSIU by using "no-busif" on DT.
+In DMA mode, you can select not to use SSIU by using "no-busif" via SSI.
 
-	&ssi0 {
-		no-busif;
-	};
+SSIU handles BUSIF which will be used for TDM Split mode.
+This driver is assuming that audio-graph card will be used.
+
+TDM Split mode merges 4 sounds. You can see 4 sound interface on system,
+and these sounds will be merged SSIU/SSI.
+
+	aplay -D plughw:0,0 xxxx.wav &
+	aplay -D plughw:0,1 xxxx.wav &
+	aplay -D plughw:0,2 xxxx.wav &
+	aplay -D plughw:0,3 xxxx.wav
+
+	          2ch                     8ch
+	[MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec]
+	          2ch       |
+	[MEM] -> [SSIU 31] -+
+	          2ch       |
+	[MEM] -> [SSIU 32] -+
+	          2ch       |
+	[MEM] -> [SSIU 33] -+
+
+see "Example: simple sound card for TDM Split"
 
 =============================================
 * SSI (Serial Sound Interface)
@@ -304,14 +244,7 @@ This is example if SSI1 want to share WS pin with SSI0
 You can use Multi-SSI.
 This is example of SSI0/SSI1/SSI2 (= for 6ch)
 
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
-			};
-		};
-	};
+see "Example: simple sound card for Multi channel"
 
 ** TDM-SSI
 
@@ -319,19 +252,7 @@ You can use TDM with SSI.
 This is example of TDM 6ch.
 Driver can automatically switches TDM <-> stereo mode in this case.
 
-	rsnd_tdm: sound {
-		compatible = "simple-audio-card";
-		...
-		simple-audio-card,cpu {
-			/* system can use TDM 6ch */
-			dai-tdm-slot-num = <6>;
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
-
+see "Example: simple sound card for TDM"
 
 =============================================
 Required properties:
@@ -346,6 +267,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
 				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
+				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -356,6 +278,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
 				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
 				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
+				    - "renesas,rcar_sound-r8a77995" (R-Car D3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
@@ -363,6 +286,9 @@ Required properties:
 - rcar_sound,ssi		: Should contain SSI feature.
 				  The number of SSI subnode should be same as HW.
 				  see below for detail.
+- rcar_sound,ssiu		: Should contain SSIU feature.
+				  The number of SSIU subnode should be same as HW.
+				  see below for detail.
 - rcar_sound,src		: Should contain SRC feature.
 				  The number of SRC subnode should be same as HW.
 				  see below for detail.
@@ -402,8 +328,13 @@ SSI subnode properties:
 - no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
 - dma				: Should contain Audio DMAC entry
 - dma-names			: SSI  case "rx"  (=playback), "tx"  (=capture)
+				  Deprecated: see SSIU subnode properties
 				  SSIU case "rxu" (=playback), "txu" (=capture)
 
+SSIU subnode properties:
+- dma				: Should contain Audio DMAC entry
+- dma-names			: "rx" (=playback), "tx" (=capture)
+
 SRC subnode properties:
 - dma				: Should contain Audio DMAC entry
 - dma-names			: "rx" (=playback), "tx" (=capture)
@@ -532,56 +463,55 @@ rcar_sound: sound@ec500000 {
 		};
 	};
 
+	rcar_sound,ssiu {
+		ssiu00: ssiu-0 {
+			dmas = <&audma0 0x15>, <&audma1 0x16>;
+			dma-names = "rx", "tx";
+		};
+		ssiu01: ssiu-1 {
+			dmas = <&audma0 0x35>, <&audma1 0x36>;
+			dma-names = "rx", "tx";
+		};
+
+		...
+
+		ssiu95: ssiu-49 {
+			dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+			dma-names = "rx", "tx";
+		};
+		ssiu96: ssiu-50 {
+			dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+			dma-names = "rx", "tx";
+		};
+		ssiu97: ssiu-51 {
+			dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+			dma-names = "rx", "tx";
+		};
+	};
+
 	rcar_sound,ssi {
 		ssi0: ssi-0 {
 			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x01>, <&audma1 0x02>;
+			dma-names = "rx", "tx";
 		};
 		ssi1: ssi-1 {
 			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi2: ssi-2 {
-			interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi3: ssi-3 {
-			interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi4: ssi-4 {
-			interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi5: ssi-5 {
-			interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi6: ssi-6 {
-			interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi7: ssi-7 {
-			interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x03>, <&audma1 0x04>;
+			dma-names = "rx", "tx";
 		};
+
+		...
+
 		ssi8: ssi-8 {
 			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x11>, <&audma1 0x12>;
+			dma-names = "rx", "tx";
 		};
 		ssi9: ssi-9 {
 			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x13>, <&audma1 0x14>;
+			dma-names = "rx", "tx";
 		};
 	};
 
@@ -647,25 +577,174 @@ Example: simple sound card
 };
 
 =============================================
+Example: simple sound card for Asynchronous mode
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	/*
+	 * SRC Asynchronous mode setting
+	 * Playback:
+	 * All input data will be converted to 48kHz
+	 * Capture:
+	 * Inputed 48kHz data will be converted to
+	 * system specified Hz
+	 */
+	simple-audio-card,convert-rate = <48000>;
+	...
+	simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+=============================================
+Example: simple sound card for channel convert
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	/*
+	 * CTU setting
+	 * All input data will be converted to 2ch
+	 * as output data
+	 */
+	simple-audio-card,convert-channels = <2>;
+	...
+	simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+=============================================
+Example: simple sound card for MIXer
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	simple-audio-card,cpu@0 {
+		sound-dai = <&rcar_sound 0>;
+	};
+	simple-audio-card,cpu@1 {
+		sound-dai = <&rcar_sound 1>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+&rcar_sound {
+	...
+	rcar_sound,dai {
+		dai0 {
+			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+		};
+		dai1 {
+			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+		};
+	};
+};
+
+=============================================
 Example: simple sound card for TDM
 =============================================
 
-	rsnd_tdm: sound {
-		compatible = "simple-audio-card";
+rsnd_tdm: sound {
+	compatible = "simple-audio-card";
 
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&sndcodec>;
+	simple-audio-card,frame-master = <&sndcodec>;
 
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-			dai-tdm-slot-num = <6>;
+	sndcpu: simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+		dai-tdm-slot-num = <6>;
+	};
+
+	sndcodec: simple-audio-card,codec {
+		sound-dai = <&xxx>;
+	};
+};
+
+=============================================
+Example: simple sound card for TDM Split
+=============================================
+
+sound_card: sound {
+	compatible = "audio-graph-scu-card";
+	prefix = "xxxx";
+	routing = "xxxx Playback", "DAI0 Playback",
+		  "xxxx Playback", "DAI1 Playback",
+		  "xxxx Playback", "DAI2 Playback",
+		  "xxxx Playback", "DAI3 Playback";
+	convert-channels = <8>; /* TDM Split */
+
+	dais = <&rsnd_port0     /* playback ch1/ch2 */
+		&rsnd_port1     /* playback ch3/ch4 */
+		&rsnd_port2     /* playback ch5/ch6 */
+		&rsnd_port3     /* playback ch7/ch8 */
+		>;
+};
+
+audio-codec {
+	...
+	port {
+		codec_0: endpoint@1 {
+			remote-endpoint = <&rsnd_ep0>;
+		};
+		codec_1: endpoint@2 {
+			remote-endpoint = <&rsnd_ep1>;
+		};
+		codec_2: endpoint@3 {
+			remote-endpoint = <&rsnd_ep2>;
+		};
+		codec_3: endpoint@4 {
+			remote-endpoint = <&rsnd_ep3>;
 		};
+	};
+};
 
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&xxx>;
+&rcar_sound {
+	...
+	ports {
+		rsnd_port0: port@0 {
+			rsnd_ep0: endpoint {
+				remote-endpoint = <&codec_0>;
+				...
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		rsnd_port1: port@1 {
+			rsnd_ep1: endpoint {
+				remote-endpoint = <&codec_1>;
+				...
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		rsnd_port2: port@2 {
+			rsnd_ep2: endpoint {
+				remote-endpoint = <&codec_2>;
+				...
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		rsnd_port3: port@3 {
+			rsnd_ep3: endpoint {
+				remote-endpoint = <&codec_3>;
+				...
+				playback = <&ssiu33 &ssi3>;
+			};
 		};
 	};
+};
 
 =============================================
 Example: simple sound card for Multi channel