aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-12-25 13:00:14 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-12-25 13:00:14 -0800
commit5813540b584c3b1a507d1c61896bec164cad0905 (patch)
tree439207beec829d15176aee7c0fd3838b024f1c94 /Documentation/devicetree/bindings
parentMerge tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd (diff)
parentmedia: cx23885: only reset DMA on problematic CPUs (diff)
downloadlinux-dev-5813540b584c3b1a507d1c61896bec164cad0905.tar.xz
linux-dev-5813540b584c3b1a507d1c61896bec164cad0905.zip
Merge tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: "First set of media patches contains: - Three new platform drivers: aspeed-video seco-sed and sun5i-csi; - One new sensor driver: imx214; - Support for Xbox DVD Movie Playback kit remote controller; - Removal of the legacy friio driver. The functionalities were ported to another driver, already merged; - New staging driver: Rockchip VPU; - Added license text or SPDX tags to all media documentation files; - Usual set of cleanup, fixes and enhancements" * tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits) media: cx23885: only reset DMA on problematic CPUs media: ddbridge: Move asm includes after linux ones media: drxk_hard: check if parameter is not NULL media: docs: fix some GPL licensing ambiguity at the text media: platform: Add Aspeed Video Engine driver media: dt-bindings: media: Add Aspeed Video Engine binding documentation media: vimc: fix start stream when link is disabled media: v4l2-device: Link subdevices to their parent devices if available media: siano: Use kmemdup instead of duplicating its function media: rockchip vpu: remove some unused vars media: cedrus: don't initialize pointers with zero media: cetrus: return an error if alloc fails media: cedrus: Add device-tree compatible and variant for A64 support media: cedrus: Add device-tree compatible and variant for H5 support media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5 media: video-i2c: check if chip struct has set_power function media: video-i2c: support runtime PM media: staging: media: imx: Use of_node_name_eq for node name comparisons media: v4l2-subdev: document controls need _FL_HAS_DEVNODE media: vivid: Improve timestamping ...
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/media/aspeed-video.txt26
-rw-r--r--Documentation/devicetree/bindings/media/cedrus.txt2
-rw-r--r--Documentation/devicetree/bindings/media/i2c/mt9m111.txt13
-rw-r--r--Documentation/devicetree/bindings/media/i2c/sony,imx214.txt53
-rw-r--r--Documentation/devicetree/bindings/media/qcom,venus.txt14
-rw-r--r--Documentation/devicetree/bindings/media/rcar_vin.txt2
-rw-r--r--Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt2
-rw-r--r--Documentation/devicetree/bindings/media/rockchip-vpu.txt29
-rw-r--r--Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt4
-rw-r--r--Documentation/devicetree/bindings/media/sun6i-csi.txt59
10 files changed, 199 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt
new file mode 100644
index 000000000000..78b464ae2672
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/aspeed-video.txt
@@ -0,0 +1,26 @@
+* Device tree bindings for Aspeed Video Engine
+
+The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can
+capture and compress video data from digital or analog sources.
+
+Required properties:
+ - compatible: "aspeed,ast2400-video-engine" or
+ "aspeed,ast2500-video-engine"
+ - reg: contains the offset and length of the VE memory region
+ - clocks: clock specifiers for the syscon clocks associated with
+ the VE (ordering must match the clock-names property)
+ - clock-names: "vclk" and "eclk"
+ - resets: reset specifier for the syscon reset associated with
+ the VE
+ - interrupts: the interrupt associated with the VE on this platform
+
+Example:
+
+video-engine@1e700000 {
+ compatible = "aspeed,ast2500-video-engine";
+ reg = <0x1e700000 0x20000>;
+ clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>;
+ clock-names = "vclk", "eclk";
+ resets = <&syscon ASPEED_RESET_VIDEO>;
+ interrupts = <7>;
+};
diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt
index a089a0c1ff05..b3c0635dcd0e 100644
--- a/Documentation/devicetree/bindings/media/cedrus.txt
+++ b/Documentation/devicetree/bindings/media/cedrus.txt
@@ -11,6 +11,8 @@ Required properties:
- "allwinner,sun7i-a20-video-engine"
- "allwinner,sun8i-a33-video-engine"
- "allwinner,sun8i-h3-video-engine"
+ - "allwinner,sun50i-a64-video-engine"
+ - "allwinner,sun50i-h5-video-engine"
- reg : register base and length of VE;
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property;
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
index 6b910036b57e..d0bed6fa901a 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -9,8 +9,14 @@ Required Properties:
- clocks: reference to the master clock.
- clock-names: shall be "mclk".
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Optional endpoint properties:
+- pclk-sample: For information see ../video-interfaces.txt. The value is set to
+ 0 if it isn't specified.
Example:
@@ -21,11 +27,10 @@ Example:
clocks = <&mclk>;
clock-names = "mclk";
- remote = <&pxa_camera>;
port {
mt9m111_1: endpoint {
- bus-width = <8>;
remote-endpoint = <&pxa_camera>;
+ pclk-sample = <1>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
new file mode 100644
index 000000000000..f11f28a5fda4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
@@ -0,0 +1,53 @@
+* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
+
+The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+an active array size of 4224H x 3200V. It is programmable through an I2C
+interface.
+Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
+throughput of 1.2Gbps/lane.
+
+
+Required Properties:
+- compatible: Shall be "sony,imx214".
+- reg: I2C bus address of the device. Depending on how the sensor is wired,
+ it shall be <0x10> or <0x1a>;
+- enable-gpios: GPIO descriptor for the enable pin.
+- vdddo-supply: Chip digital IO regulator (1.8V).
+- vdda-supply: Chip analog regulator (2.7V).
+- vddd-supply: Chip digital core regulator (1.12V).
+- clocks: Reference to the xclk clock.
+- clock-frequency: Frequency of the xclk clock.
+
+Optional Properties:
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+The imx214 device node shall contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+
+ camera-sensor@1a {
+ compatible = "sony,imx214";
+ reg = <0x1a>;
+ vdddo-supply = <&pm8994_lvs1>;
+ vddd-supply = <&camera_vddd_1v12>;
+ vdda-supply = <&pm8994_l17>;
+ lens-focus = <&ad5820>;
+ enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+ clocks = <&mmcc CAMSS_MCLK0_CLK>;
+ clock-frequency = <24000000>;
+ port {
+ imx214_ep: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <480000000>;
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
index 00d0d1bf7647..b602c4c025e7 100644
--- a/Documentation/devicetree/bindings/media/qcom,venus.txt
+++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
@@ -53,7 +53,8 @@
* Subnodes
The Venus video-codec node must contain two subnodes representing
-video-decoder and video-encoder.
+video-decoder and video-encoder, and one optional firmware subnode.
+Firmware subnode is needed when the platform does not have TrustZone.
Every of video-encoder or video-decoder subnode should have:
@@ -79,6 +80,13 @@ Every of video-encoder or video-decoder subnode should have:
power domain which is responsible for collapsing
and restoring power to the subcore.
+The firmware subnode must have:
+
+- iommus:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+
* An Example
video-codec@1d00000 {
compatible = "qcom,msm8916-venus";
@@ -105,4 +113,8 @@ Every of video-encoder or video-decoder subnode should have:
clock-names = "core";
power-domains = <&mmcc VENUS_CORE1_GDSC>;
};
+
+ video-firmware {
+ iommus = <&apps_iommu 0x10b2 0x0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index d329a4e8ac58..0dd84a183ca7 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -24,6 +24,8 @@ on Gen3 platforms to a CSI-2 receiver.
- "renesas,vin-r8a7796" for the R8A7796 device
- "renesas,vin-r8a77965" for the R8A77965 device
- "renesas,vin-r8a77970" for the R8A77970 device
+ - "renesas,vin-r8a77980" for the R8A77980 device
+ - "renesas,vin-r8a77990" for the R8A77990 device
- "renesas,vin-r8a77995" for the R8A77995 device
- "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
device.
diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
index 2d385b65b275..541d936b62e8 100644
--- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
+++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
@@ -12,6 +12,8 @@ Mandatory properties
- "renesas,r8a7796-csi2" for the R8A7796 device.
- "renesas,r8a77965-csi2" for the R8A77965 device.
- "renesas,r8a77970-csi2" for the R8A77970 device.
+ - "renesas,r8a77980-csi2" for the R8A77980 device.
+ - "renesas,r8a77990-csi2" for the R8A77990 device.
- reg: the register base and size for the device registers
- interrupts: the interrupt for the device
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
new file mode 100644
index 000000000000..35dc464ad7c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
@@ -0,0 +1,29 @@
+device-tree bindings for rockchip VPU codec
+
+Rockchip (Video Processing Unit) present in various Rockchip platforms,
+such as RK3288 and RK3399.
+
+Required properties:
+- compatible: value should be one of the following
+ "rockchip,rk3288-vpu";
+ "rockchip,rk3399-vpu";
+- interrupts: encoding and decoding interrupt specifiers
+- interrupt-names: should be "vepu" and "vdpu"
+- clocks: phandle to VPU aclk, hclk clocks
+- clock-names: should be "aclk" and "hclk"
+- power-domains: phandle to power domain node
+- iommus: phandle to a iommu node
+
+Example:
+SoC-specific DT entry:
+ vpu: video-codec@ff9a0000 {
+ compatible = "rockchip,rk3288-vpu";
+ reg = <0x0 0xff9a0000 0x0 0x800>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power RK3288_PD_VIDEO>;
+ iommus = <&vpu_mmu>;
+ };
diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
index fc5aa263abe5..98a72c0b3c64 100644
--- a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
+++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
@@ -5,6 +5,10 @@ Required properties:
- reg: SPI chip select number for the device.
- spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz).
+Optional properties:
+- vcc-supply: Optional phandle to the vcc regulator to power the adapter,
+ as described in the file ../regulator/regulator.txt
+
Example:
cxd2880@0 {
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
new file mode 100644
index 000000000000..d4ab34f2240c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -0,0 +1,59 @@
+Allwinner V3s Camera Sensor Interface
+-------------------------------------
+
+Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
+
+Required properties:
+ - compatible: value must be one of:
+ * "allwinner,sun6i-a31-csi"
+ * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi"
+ * "allwinner,sun8i-v3s-csi"
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the CSI
+ * bus: the CSI interface clock
+ * mod: the CSI module clock
+ * ram: the CSI DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset line driving the CSI
+
+The CSI node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node properties for CSI
+---------------------------------
+See the video-interfaces.txt for a detailed description of these properties.
+- remote-endpoint : (required) a phandle to the bus receiver's endpoint
+ node
+- bus-width: : (required) must be 8, 10, 12 or 16
+- pclk-sample : (optional) (default: sample on falling edge)
+- hsync-active : (required; parallel-only)
+- vsync-active : (required; parallel-only)
+
+Example:
+
+csi1: csi@1cb4000 {
+ compatible = "allwinner,sun8i-v3s-csi";
+ reg = <0x01cb4000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI1_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+
+ port {
+ /* Parallel bus endpoint */
+ csi1_ep: endpoint {
+ remote-endpoint = <&adv7611_ep>;
+ bus-width = <16>;
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};