aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-09 14:57:37 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-09 14:57:37 -0800
commit6da314122ddc11936c6f054753bbb956a499d020 (patch)
tree029269bba41ceccb7faa2283bd4af716e571b468 /Documentation/devicetree/bindings
parentMerge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc (diff)
parentARM: dts: rk3288: add arm,cpu-registers-not-fw-configured (diff)
downloadlinux-dev-6da314122ddc11936c6f054753bbb956a499d020.tar.xz
linux-dev-6da314122ddc11936c6f054753bbb956a499d020.zip
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Arnd Bergmann: "The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: - AMLogic Meson8 - ARM Realview in DT mode - Allwinner A80 - Broadcom BCM47081 - Broadcom Cygnus - Freescale LS1021A - Freescale Vybrid 500 series - Mediatek MT6592, MT8127, MT8135 - STMicroelectronics STiH410 - Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: - ARM RealView PB1176 - Altera SOCFPGA Arria 10 - Asus RT-N18U (BCM47081) - Buffalo WZR-1750DHP (BCM4708) - Buffalo WZR-600DHP2 (BCM47081) - Cygnus Enterprise Phone (BCM911360_ENTPHN) - D-Link DIR-665 - Google Spring - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) - IGEPv2 Rev. F (TI OMAP AM/DM37x) - LS1021A QDS Board - LS1021A TWR Board - LeMaker Banana Pi - MarsBoard RK3066 - MediaTek MT8127 Moose Board - MediaTek MT8135 evaluation board - Mele M3 - Merrii A80 Optimus Board - Netgear R6300 V2 (BCM4708) - Nomadik STN8815NHK - NovaTech OrionLXm - Olimex A20-OLinuXino-LIME2 - Raspberry Pi Model B+ - STiH410 B2120 - Samsung Monk board - Samsung Rinato board - Synology DS213j - Synology DS414 - TBS2910 Matrix ARM mini PC - TI AM5728 BeagleBoard-X15 - Toradex Colibri VF50 on Colibri Evaluation Board - Zynq ZYBO Development Board Other notable changes include: - exynos: cleanup of existing dts files - mvebu: improved pinctrl support for Armada 370/XP - nomadik: restructuring dts files - omap: added CAN bus support - shmobile: added clock support for some SoCs - shmobile: added sound support for some SoCs - sirf: reset controller support - sunxi: continuing the relicensing under dual GPL/MIT - sunxi: lots of new on-chip device support - sunxi: working simplefb support (long awaited) - various: provide stdout-path property for earlycon" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits) ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 ARM: BCM5301X: Add DT for Asus RT-N18U ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP ARM: BCM5301X: Add DT for Netgear R6300 V2 ARM: BCM5301X: Add buttons for Netgear R6250 ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 ARM: dts: rockchip: add label property for leds on Radxa Rock ARM: BCM5301X: Add LEDs for Netgear R6250 V1 ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file ARM: dts: add sysreg phandle to i2c device nodes for exynos ARM: dts: Remove unused bootargs from exynos3250-rinato ARM: dts: add board dts file for Exynos3250-based Monk board ...
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/arm/arm-boards65
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/cygnus.txt31
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt38
-rw-r--r--Documentation/devicetree/bindings/arm/gic.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,berlin.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/samsung-boards.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/ste-nomadik.txt6
-rw-r--r--Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/vf610-clock.txt15
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,mtu2.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,tmu.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
18 files changed, 248 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index c554ed3d44fb..556c8665fdbf 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -92,3 +92,68 @@ Required nodes:
- core-module: the root node to the Versatile platforms must have
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+ /* RealView Emulation Baseboard */
+ compatible = "arm,realview-eb";
+ /* RealView Platform Baseboard for ARM1176JZF-S */
+ compatible = "arm,realview-pb1176";
+ /* RealView Platform Baseboard for ARM11 MPCore */
+ compatible = "arm,realview-pb11mp";
+ /* RealView Platform Baseboard for Cortex A-8 */
+ compatible = "arm,realview-pba8";
+ /* RealView Platform Baseboard Explore for Cortex A-9 */
+ compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+ node that contain the SoC-specific devices, withe the compatible
+ string set to one of these tuples:
+ "arm,realview-eb-soc", "simple-bus"
+ "arm,realview-pb1176-soc", "simple-bus"
+ "arm,realview-pb11mp-soc", "simple-bus"
+ "arm,realview-pba8-soc", "simple-bus"
+ "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+ system controller node pointing to the control registers,
+ with the compatible string set to one of these tuples:
+ "arm,realview-eb-syscon", "syscon"
+ "arm,realview-pb1176-syscon", "syscon"
+ "arm,realview-pb11mp-syscon", "syscon"
+ "arm,realview-pba8-syscon", "syscon"
+ "arm,realview-pbx-syscon", "syscon"
+
+ Required properties for the system controller:
+ - regs: the location and size of the system controller registers,
+ one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176 with device tree";
+ compatible = "arm,realview-pb1176";
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+ };
+
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
new file mode 100644
index 000000000000..4c77169bb534
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
@@ -0,0 +1,31 @@
+Broadcom Cygnus device tree bindings
+------------------------------------
+
+
+Boards with Cygnus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM11300
+compatible = "brcm,bcm11300", "brcm,cygnus";
+
+BCM11320
+compatible = "brcm,bcm11320", "brcm,cygnus";
+
+BCM11350
+compatible = "brcm,bcm11350", "brcm,cygnus";
+
+BCM11360
+compatible = "brcm,bcm11360", "brcm,cygnus";
+
+BCM58300
+compatible = "brcm,bcm58300", "brcm,cygnus";
+
+BCM58302
+compatible = "brcm,bcm58302", "brcm,cygnus";
+
+BCM58303
+compatible = "brcm,bcm58303", "brcm,cygnus";
+
+BCM58305
+compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e935d7d4ac43..4e8b7df7fc62 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -74,3 +74,41 @@ Required root node properties:
i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
+
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+ - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+ SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-scfg"
+ - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
+
+Freescale DCFG
+ DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-dcfg"
+ - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c7d2fa156678..b38608af66db 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -17,6 +17,7 @@ Main node required properties:
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
"brcm,brahma-b15-gic"
+ "arm,arm1176jzf-devchip-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 904de5781f44..a99eb9eb14c0 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -106,11 +106,21 @@ Required subnode-properties:
- groups: a list of strings describing the group names.
- function: a string describing the function used to mux the groups.
+* Reset controller binding
+
+A reset controller is part of the chip control registers set. The chip control
+node also provides the reset. The register set is not at the same offset between
+Berlin SoCs.
+
+Required property:
+- #reset-cells: must be set to 2
+
Example:
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>, <&externaldev 0>;
clock-names = "refclk", "video_ext0";
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index fa252261dfaf..3be40139cfbb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,10 +1,14 @@
-Mediatek MT6589 Platforms Device Tree Bindings
+MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
-Boards with a SoC of the Mediatek MT6589 shall have the following property:
+Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
Required root node property:
-compatible: must contain "mediatek,mt6589"
+compatible: Must contain one of
+ "mediatek,mt6589"
+ "mediatek,mt6592"
+ "mediatek,mt8127"
+ "mediatek,mt8135"
Supported boards:
@@ -12,3 +16,12 @@ Supported boards:
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+- Evaluation board for MT6592:
+ Required root node properties:
+ - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- MTK mt8127 tablet moose EVB:
+ Required root node properties:
+ - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+- MTK mt8135 tablet EVB:
+ Required root node properties:
+ - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ddd9bcdf889c..4f6a82cef1d1 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -132,6 +132,9 @@ Boards:
- AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+- AM335X OrionLXm : Substation Automation Platform
+ compatible = "novatech,am335x-lxm", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 857f12636eb2..eaa3d1a0eb05 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,10 @@
Rockchip platforms device tree bindings
---------------------------------------
+- MarsBoard RK3066 board:
+ Required root node properties:
+ - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
- bq Curie 2 tablet:
Required root node properties:
- compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
index 2168ed31e1b0..43589d2466a7 100644
--- a/Documentation/devicetree/bindings/arm/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -1,11 +1,20 @@
-* Samsung's Exynos4210 based SMDKV310 evaluation board
-
-SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+* Samsung's Exynos SoC based boards
Required root node properties:
- compatible = should be one or more of the following.
- (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
- (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
+ - "samsung,monk" - for Exynos3250-based Samsung Simband board.
+ - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
+ - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
+ - "samsung,trats" - for Exynos4210-based Tizen Reference board.
+ - "samsung,universal_c210" - for Exynos4210-based Samsung board.
+ - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
+ - "samsung,trats2" - for Exynos4412-based Tizen Reference board.
+ - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
+ - "samsung,xyref5260" - for Exynos5260-based Samsung board.
+ - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
+ - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
+ - "samsung,sd5v1" - for Exynos5440-based Samsung board.
+ - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
Optional:
- firmware node, specifying presence and type of secure firmware:
diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
index 6256ec31666d..2fdff5a806cf 100644
--- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt
+++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
@@ -10,6 +10,12 @@ Required root node property: src
Boards with the Nomadik SoC include:
+Nomadik NHK-15 board manufactured by ST Microelectronics:
+
+Required root node property:
+
+compatible="st,nomadik-nhk-15";
+
S8815 "MiniKit" manufactured by Calao Systems:
Required root node property:
diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
new file mode 100644
index 000000000000..00d26edec8bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
@@ -0,0 +1,34 @@
+Broadcom Cygnus Clocks
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Currently various "fixed" clocks are declared for peripheral drivers that use
+the common clock framework to reference their core clocks. Proper support of
+these clocks will be added later
+
+Device tree example:
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
index c80863d344ac..63f9f1ac3439 100644
--- a/Documentation/devicetree/bindings/clock/vf610-clock.txt
+++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt
@@ -5,6 +5,19 @@ Required properties:
- reg: Address and length of the register set
- #clock-cells: Should be <1>
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+ given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+- clock-names: list of names of clocks which are exteral input clocks to the
+ given clock controller.
+
+Input clocks for top clock controller:
+ - sxosc (external crystal oscillator 32KHz, recommended)
+ - fxosc (external crystal oscillator 24MHz, recommended)
+ - audio_ext
+ - enet_ext
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
for the full list of VF610 clock IDs.
@@ -15,6 +28,8 @@ clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
};
uart1: serial@40028000 {
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index 1405ed071bb4..e4c4d47f8137 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -25,7 +25,7 @@ Required child node properties:
- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
"xlnx,axi-vdma-s2mm-channel".
- interrupts: Should contain per channel VDMA interrupts.
-- xlnx,data-width: Should contain the stream data width, take values
+- xlnx,datawidth: Should contain the stream data width, take values
{32,64...1024}.
Optional child node properties:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index 278de8e64bbf..89b3250f049b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -32,6 +32,7 @@ Optional properties:
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
specified, the default value in Hz is 100000.
+ - samsung,sysreg-phandle - handle to syscon used to control the system registers
Example:
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index fbde415078e6..605dcca5dbec 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,6 +56,8 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
isl,isl12057 Intersil ISL12057 I2C RTC Chip
+isil,isl29028 (deprecated, use isl)
+isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
index d9a8d5af1a21..ba0a34d97eb8 100644
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
clock inputs and programmable compare match.
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index 7db89fb25444..cd5f20bf2582 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Timer Unit (TMU)
+* Renesas R-Mobile/R-Car Timer Unit (TMU)
The TMU is a 32-bit timer/counter with configurable clock inputs and
programmable compare match.
@@ -9,6 +9,8 @@ are independent. The TMU hardware supports up to three channels.
Required Properties:
- compatible: must contain one or more of the following:
+ - "renesas,tmu-r8a7740" for the r8a7740 TMU
+ - "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
- "renesas,tmu" for any TMU.
This is a fallback for the above renesas,tmu-* entries
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ecaf2035c2fe..0d354625299c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -41,6 +41,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
digi Digi International Inc.
+digilent Diglent, Inc.
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
@@ -78,6 +79,7 @@ innolux Innolux Corporation
intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
+isil Intersil (deprecated, use isl)
isl Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
@@ -150,6 +152,7 @@ st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
+tbs TBS Technologies
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility