aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2018-12-20 16:47:10 -0800
committerDavid S. Miller <davem@davemloft.net>2018-12-20 16:47:10 -0800
commite69fbf31ca2cf6d6a2afedd0f8b30dcd10e76049 (patch)
tree2e4bc36c18d11be125f6b27ddca4f31c01c63863 /Documentation/devicetree/bindings
parentlinux/netlink.h: drop unnecessary extern prefix (diff)
parentMerge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git (diff)
downloadlinux-dev-e69fbf31ca2cf6d6a2afedd0f8b30dcd10e76049.tar.xz
linux-dev-e69fbf31ca2cf6d6a2afedd0f8b30dcd10e76049.zip
Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 Last set of patches for 4.21. mt76 is still in very active development and having some refactoring as well as new features. But also other drivers got few new features and fixes. Major changes: ath10k * add amsdu support for QCA6174 monitor mode * report tx rate using the new ieee80211_tx_rate_update() API * wcn3990 support is not experimental anymore iwlwifi * support for FW version 43 for 9000 and 22000 series brcmfmac * add support for CYW43012 SDIO chipset * add the raw 4354 PCIe device ID for unprogrammed Cypress boards mwifiex * add NL80211_STA_INFO_RX_BITRATE support mt76 * use the same firmware for mt76x2e and mt76x2u * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt74
1 files changed, 49 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 2196d1ab3c8c..ae661e65354e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -21,10 +21,22 @@ can be provided per device.
SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
-Optional properties:
- reg: Address and length of the register set for the device.
- reg-names: Must include the list of following reg names,
"membase"
+- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
+ compatible target.
+ reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
+ compatible target.
+ Must contain interrupt-names property per entry for
+ "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
+
+- interrupt-names: Must include the entries for MSI interrupt
+ names ("msi0" to "msi15") and legacy interrupt
+ name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
+ compatible targets.
+
+Optional properties:
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reseti.txt for details.
- reset-names: Must include the list of following reset names,
@@ -37,12 +49,9 @@ Optional properties:
- clocks: List of clock specifiers, must contain an entry for each required
entry in clock-names.
- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
- "wifi_wcss_rtc".
-- interrupts: List of interrupt lines. Must contain an entry
- for each entry in the interrupt-names property.
-- interrupt-names: Must include the entries for MSI interrupt
- names ("msi0" to "msi15") and legacy interrupt
- name ("legacy"),
+ "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
+ "cxo_ref_clk_pin" for "qcom,wcn3990-wifi"
+ compatible target.
- qcom,msi_addr: MSI interrupt address.
- qcom,msi_base: Base value to add before writing MSI data into
MSI address register.
@@ -55,14 +64,25 @@ Optional properties:
- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
the length can vary between hw versions.
- <supply-name>-supply: handle to the regulator device tree node
- optional "supply-name" is "vdd-0.8-cx-mx".
+ optional "supply-name" are "vdd-0.8-cx-mx",
+ "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
- memory-region:
Usage: optional
Value type: <phandle>
Definition: reference to the reserved-memory for the msa region
used by the wifi firmware running in Q6.
+- iommus:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+- ext-fem-name:
+ Usage: Optional
+ Value type: string
+ Definition: Name of external front end module used. Some valid FEM names
+ for example: "microsemi-lx5586", "sky85703-11"
+ and "sky85803" etc.
-Example (to supply the calibration data alone):
+Example (to supply PCI based wifi block details):
In this example, the node is defined as child node of the PCI controller.
@@ -74,10 +94,10 @@ pci {
#address-cells = <3>;
device_type = "pci";
- ath10k@0,0 {
+ wifi@0,0 {
reg = <0 0 0 0 0>;
- device_type = "pci";
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+ ext-fem-name = "microsemi-lx5586";
};
};
};
@@ -138,21 +158,25 @@ wifi@18000000 {
compatible = "qcom,wcn3990-wifi";
reg = <0x18800000 0x800000>;
reg-names = "membase";
- clocks = <&clock_gcc clk_aggre2_noc_clk>;
- clock-names = "smmu_aggre2_noc_clk"
+ clocks = <&clock_gcc clk_rf_clk2_pin>;
+ clock-names = "cxo_ref_clk_pin";
interrupts =
- <0 130 0 /* CE0 */ >,
- <0 131 0 /* CE1 */ >,
- <0 132 0 /* CE2 */ >,
- <0 133 0 /* CE3 */ >,
- <0 134 0 /* CE4 */ >,
- <0 135 0 /* CE5 */ >,
- <0 136 0 /* CE6 */ >,
- <0 137 0 /* CE7 */ >,
- <0 138 0 /* CE8 */ >,
- <0 139 0 /* CE9 */ >,
- <0 140 0 /* CE10 */ >,
- <0 141 0 /* CE11 */ >;
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
memory-region = <&wifi_msa_mem>;
+ iommus = <&apps_smmu 0x0040 0x1>;
};