aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-12-28 20:00:21 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-12-28 20:00:21 -0800
commit24dc83635ffe3c93d8122099a83ee228c9b7e4f7 (patch)
tree4fafa40785d591a735c78ec3bbee7a05b944c1be /Documentation/devicetree
parentMerge tag 'drm-next-2018-12-27' of git://anongit.freedesktop.org/drm/drm (diff)
parentgpio: sama5d2-piobu: Depend on OF_GPIO (diff)
downloadlinux-dev-24dc83635ffe3c93d8122099a83ee228c9b7e4f7.tar.xz
linux-dev-24dc83635ffe3c93d8122099a83ee228c9b7e4f7.zip
Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt12
-rw-r--r--Documentation/devicetree/bindings/gpio/cdns,gpio.txt43
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-vf610.txt6
-rw-r--r--Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt38
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt4
6 files changed, 92 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 4b96608ad692..14f319f694b7 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -158,14 +158,24 @@ Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
+embeds secure memories that can be scrambled.
+
+The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+Note that they maintain their voltage during Backup/Self-refresh.
required properties:
- compatible: Should be "atmel,<chip>-secumod", "syscon".
<chip> can be "sama5d2".
- reg: Should contain registers location and length
+- gpio-controller: Marks the port as GPIO controller.
+- #gpio-cells: There are 2. The pin number is the
+ first, the second represents additional
+ parameters such as GPIO_ACTIVE_HIGH/LOW.
+
secumod@fc040000 {
compatible = "atmel,sama5d2-secumod", "syscon";
reg = <0xfc040000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
new file mode 100644
index 000000000000..706ef00f5c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
@@ -0,0 +1,43 @@
+Cadence GPIO controller bindings
+
+Required properties:
+- compatible: should be "cdns,gpio-r1p02".
+- reg: the register base address and size.
+- #gpio-cells: should be 2.
+ * first cell is the GPIO number.
+ * second cell specifies the GPIO flags, as defined in
+ <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
+ and GPIO_ACTIVE_LOW flags are supported.
+- gpio-controller: marks the device as a GPIO controller.
+- clocks: should contain one entry referencing the peripheral clock driving
+ the GPIO controller.
+
+Optional properties:
+- ngpios: integer number of gpio lines supported by this controller, up to 32.
+- interrupts: interrupt specifier for the controllers interrupt.
+- interrupt-controller: marks the device as an interrupt controller. When
+ defined, interrupts, interrupt-parent and #interrupt-cells
+ are required.
+- interrupt-cells: should be 2.
+ * first cell is the GPIO number you want to use as an IRQ source.
+ * second cell specifies the IRQ type, as defined in
+ <dt-bindings/interrupt-controller/irq.h>.
+ Currently only level sensitive IRQs are supported.
+
+
+Example:
+ gpio0: gpio-controller@fd060000 {
+ compatible = "cdns,gpio-r1p02";
+ reg =<0xfd060000 0x1000>;
+
+ clocks = <&gpio_clk>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
index 0ccbae44019c..ae254aadee35 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
@@ -24,6 +24,12 @@ Required properties for GPIO node:
4 = active high level-sensitive.
8 = active low level-sensitive.
+Optional properties:
+-clocks: Must contain an entry for each entry in clock-names.
+ See common clock-bindings.txt for details.
+-clock-names: A list of clock names. For imx7ulp, it must contain
+ "gpio", "port".
+
Note: Each GPIO port should have an alias correctly numbered in "aliases"
node.
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
index eb7cdd69e10b..627efc78ecf2 100644
--- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -3,12 +3,24 @@ NXP LPC18xx/43xx GPIO controller Device Tree Bindings
Required properties:
- compatible : Should be "nxp,lpc1850-gpio"
-- reg : Address and length of the register set for the device
-- clocks : Clock specifier (see clock bindings for details)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two
- - First cell is the GPIO line number
- - Second cell is used to specify polarity
+- reg : List of addresses and lengths of the GPIO controller
+ register sets
+- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
+ "gpio-gpoup1-ic"
+- clocks : Phandle and clock specifier pair for GPIO controller
+- resets : Phandle and reset specifier pair for GPIO controller
+- gpio-controller : Marks the device node as a GPIO controller
+- #gpio-cells : Should be two:
+ - The first cell is the GPIO line number
+ - The second cell is used to specify polarity
+- interrupt-controller : Marks the device node as an interrupt controller
+- #interrupt-cells : Should be two:
+ - The first cell is an interrupt number within
+ 0..9 range, for GPIO pin interrupts it is equal
+ to 'nxp,gpio-pin-interrupt' property value of
+ GPIO pin configuration, 8 is for GPIO GROUP0
+ interrupt, 9 is for GPIO GROUP1 interrupt
+ - The second cell is used to specify interrupt type
Optional properties:
- gpio-ranges : Mapping between GPIO and pinctrl
@@ -19,21 +31,29 @@ Example:
gpio: gpio@400f4000 {
compatible = "nxp,lpc1850-gpio";
- reg = <0x400f4000 0x4000>;
+ reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+ <0x40088000 0x1000>, <0x40089000 0x1000>;
+ reg-names = "gpio", "gpio-pin-ic",
+ "gpio-group0-ic", "gpio-gpoup1-ic";
clocks = <&ccu1 CLK_CPU_GPIO>;
+ resets = <&rgu 28>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
...
<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
};
gpio_joystick {
- compatible = "gpio-keys-polled";
+ compatible = "gpio-keys";
...
- button@0 {
+ button0 {
...
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
};
};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 2889bbcd7416..f3f2c468c1b6 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -8,6 +8,7 @@ Required Properties:
- "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
- "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
- "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
+ - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller.
- "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
- "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
- "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
index 7276b50c3506..839dd32ffe11 100644
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
@@ -43,7 +43,7 @@ gpio: gpio@20000 {
#address-cells = <1>;
#size-cells = <0>;
- porta: gpio-controller@0 {
+ porta: gpio@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -55,7 +55,7 @@ gpio: gpio@20000 {
interrupts = <0>;
};
- portb: gpio-controller@1 {
+ portb: gpio@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;