Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of new char/misc driver drivers and features for
  4.12-rc1.

  There's lots of new drivers added this time around, new firmware
  drivers from Google, more auxdisplay drivers, extcon drivers, fpga
  drivers, and a bunch of other driver updates. Nothing major, except if
  you happen to have the hardware for these drivers, and then you will
  be happy :)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  firmware: google memconsole: Fix return value check in platform_memconsole_init()
  firmware: Google VPD: Fix return value check in vpd_platform_init()
  goldfish_pipe: fix build warning about using too much stack.
  goldfish_pipe: An implementation of more parallel pipe
  fpga fr br: update supported version numbers
  fpga: region: release FPGA region reference in error path
  fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
  mei: drop the TODO from samples
  firmware: Google VPD sysfs driver
  firmware: Google VPD: import lib_vpd source files
  misc: lkdtm: Add volatile to intentional NULL pointer reference
  eeprom: idt_89hpesx: Add OF device ID table
  misc: ds1682: Add OF device ID table
  misc: tsl2550: Add OF device ID table
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Use kernel common min() implementation
  uio_mf624: Align memory regions to page size and set correct offsets
  uio_mf624: Refactor memory info initialization
  uio: Allow handling of non page-aligned memory regions
  hangcheck-timer: Fix typo in comment
  ...

9 files changed, 188 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
new file mode 100644
index 000000000000..2aa24b889923
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
@@ -0,0 +1,45 @@
+DT bindings for the Hitachi HD44780 Character LCD Controller
+
+The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs
+that can display one or more lines of text. It exposes an M6800 bus interface,
+which can be used in either 4-bit or 8-bit mode.
+
+Required properties:
+  - compatible: Must contain "hit,hd44780",
+  - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers,
+    referring to the GPIO pins connected to the data signal lines DB0-DB7
+    (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface,
+  - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin
+    connected to the "E" (Enable) signal line of the LCD Controller's bus
+    interface,
+  - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin
+    connected to the "RS" (Register Select) signal line of the LCD Controller's
+    bus interface,
+  - display-height-chars: Height of the display, in character cells,
+  - display-width-chars: Width of the display, in character cells.
+
+Optional properties:
+  - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin
+    connected to the "RW" (Read/Write) signal line of the LCD Controller's bus
+    interface,
+  - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin
+    used for enabling the LCD's backlight,
+  - internal-buffer-width: Internal buffer width (default is 40 for displays
+    with 1 or 2 lines, and display-width-chars for displays with more than 2
+    lines).
+
+Example:
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+
+		data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+			     <&hc595 1 GPIO_ACTIVE_HIGH>,
+			     <&hc595 2 GPIO_ACTIVE_HIGH>,
+			     <&hc595 3 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
diff --git a/Documentation/devicetree/bindings/firmware/coreboot.txt b/Documentation/devicetree/bindings/firmware/coreboot.txt
new file mode 100644
index 000000000000..4c955703cea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/coreboot.txt
@@ -0,0 +1,33 @@
+COREBOOT firmware information
+
+The device tree node to communicate the location of coreboot's memory-resident
+bookkeeping structures to the kernel. Since coreboot itself cannot boot a
+device-tree-based kernel (yet), this node needs to be inserted by a
+second-stage bootloader (a coreboot "payload").
+
+Required properties:
+ - compatible: Should be "coreboot"
+ - reg: Address and length of the following two memory regions, in order:
+	1.) The coreboot table. This is a list of variable-sized descriptors
+	that contain various compile- and run-time generated firmware
+	parameters. It is identified by the magic string "LBIO" in its first
+	four bytes.
+	See coreboot's src/commonlib/include/commonlib/coreboot_tables.h for
+	details.
+	2.) The CBMEM area. This is a downward-growing memory region used by
+	coreboot to dynamically allocate data structures that remain resident.
+	It may or may not include the coreboot table as one of its members. It
+	is identified by a root node descriptor with the magic number
+	0xc0389481 that resides in the topmost 8 bytes of the area.
+	See coreboot's src/include/imd.h for details.
+
+Example:
+	firmware {
+		ranges;
+
+		coreboot {
+			compatible = "coreboot";
+			reg = <0xfdfea000 0x264>,
+			      <0xfdfea000 0x16000>;
+		}
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt
new file mode 100644
index 000000000000..52a294cf2730
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt
@@ -0,0 +1,12 @@
+Altera Arria10 Partial Reconfiguration IP
+
+Required properties:
+- compatible : should contain "altr,a10-pr-ip"
+- reg        : base address and size for memory mapped io.
+
+Example:
+
+	fpga_mgr: fpga-mgr@ff20c000 {
+		compatible = "altr,a10-pr-ip";
+		reg = <0xff20c000 0x10>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 3b32ba15a717..81bf3adba24b 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -186,6 +186,7 @@ Optional properties:
 	otherwise full reconfiguration is done.
 - external-fpga-config : boolean, set if the FPGA has already been configured
 	prior to OS boot up.
+- encrypted-fpga-config : boolean, set if the bitstream is encrypted
 - region-unfreeze-timeout-us : The maximum time in microseconds to wait for
 	bridges to successfully become enabled after the region has been
 	programmed.
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
new file mode 100644
index 000000000000..4dc412437b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
@@ -0,0 +1,21 @@
+Lattice iCE40 FPGA Manager
+
+Required properties:
+- compatible:		Should contain "lattice,ice40-fpga-mgr"
+- reg:			SPI chip select
+- spi-max-frequency:	Maximum SPI frequency (>=1000000, <=25000000)
+- cdone-gpios:		GPIO input connected to CDONE pin
+- reset-gpios:		Active-low GPIO output connected to CRESET_B pin. Note
+			that unless the GPIO is held low during startup, the
+			FPGA will enter Master SPI mode and drive SCK with a
+			clock signal potentially jamming other devices on the
+			bus until the firmware is loaded.
+
+Example:
+	fpga: fpga@0 {
+		compatible = "lattice,ice40-fpga-mgr";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
new file mode 100644
index 000000000000..9766f7472f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
@@ -0,0 +1,44 @@
+Xilinx Slave Serial SPI FPGA Manager
+
+Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
+what is referred to as "slave serial" interface.
+The slave serial link is not technically SPI, and might require extra
+circuits in order to play nicely with other SPI slaves on the same bus.
+
+See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+
+Required properties:
+- compatible: should contain "xlnx,fpga-slave-serial"
+- reg: spi chip select of the FPGA
+- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
+- done-gpios: config status pin (referred to as DONE in the manual)
+
+Example for full FPGA configuration:
+
+	fpga-region0 {
+		compatible = "fpga-region";
+		fpga-mgr = <&fpga_mgr_spi>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+	};
+
+	spi1: spi@10680 {
+		compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+		pinctrl-0 = <&spi0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		interrupts = <92>;
+		clocks = <&coreclk 0>;
+		status = "okay";
+
+		fpga_mgr_spi: fpga-mgr@0 {
+			compatible = "xlnx,fpga-slave-serial";
+			spi-max-frequency = <60000000>;
+			spi-cpha;
+			reg = <0>;
+			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index d543ed3f5363..ef06d061913c 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -1,7 +1,11 @@
 Allwinner sunxi-sid
 
 Required properties:
-- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
+- compatible: Should be one of the following:
+  "allwinner,sun4i-a10-sid"
+  "allwinner,sun7i-a20-sid"
+  "allwinner,sun8i-h3-sid"
+
 - reg: Should contain registers location and length
 
 = Data cells =
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.txt b/Documentation/devicetree/bindings/nvmem/imx-iim.txt
new file mode 100644
index 000000000000..1978c5bcd96d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.txt
@@ -0,0 +1,22 @@
+Freescale i.MX IC Identification Module (IIM) device tree bindings
+
+This binding represents the IC Identification Module (IIM) found on
+i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
+
+Required properties:
+- compatible: should be one of
+	"fsl,imx25-iim", "fsl,imx27-iim",
+	"fsl,imx31-iim", "fsl,imx35-iim",
+	"fsl,imx51-iim", "fsl,imx53-iim",
+- reg: Should contain the register base and length.
+- interrupts: Should contain the interrupt for the IIM
+- clocks: Should contain a phandle pointing to the gated peripheral clock.
+
+Example:
+
+	iim: iim@63f98000 {
+		compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+		reg = <0x63f98000 0x4000>;
+		interrupts = <69>;
+                clocks = <&clks IMX5_CLK_IIM_GATE>;
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 966a72ecc6bd..70d791b03ea1 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -9,14 +9,19 @@ Required properties:
 	"fsl,imx6sl-ocotp" (i.MX6SL), or
 	"fsl,imx6sx-ocotp" (i.MX6SX),
 	"fsl,imx6ul-ocotp" (i.MX6UL),
+	"fsl,imx7d-ocotp" (i.MX7D/S),
 	followed by "syscon".
 - reg: Should contain the register base and length.
 - clocks: Should contain a phandle pointing to the gated peripheral clock.
 
+Optional properties:
+- read-only: disable write access
+
 Example:
 
 	ocotp: ocotp@021bc000 {
 		compatible = "fsl,imx6q-ocotp", "syscon";
 		reg = <0x021bc000 0x4000>;
 		clocks = <&clks IMX6QDL_CLK_IIM>;
+		read-only;
 	};