diff options
| author |   Dan Robertson <dan@dlrobertson.com> | 2019-09-05 01:45:53 +0000 |
|---|---|---|
| committer |   Guenter Roeck <linux@roeck-us.net> | 2019-09-10 11:42:56 -0700 |
| commit | ffd96868ac5d4c22bba1ba2175d124cb2775f3f7 (patch) | |
| tree | 4b2b792cbca4348f17f33700d0410028cc9b71cd /Documentation/hwmon | |
| parent | hwmon: (shtc1) fix shtc1 and shtw1 id mask (diff) | |
| download | linux-dev-ffd96868ac5d4c22bba1ba2175d124cb2775f3f7.tar.xz linux-dev-ffd96868ac5d4c22bba1ba2175d124cb2775f3f7.zip | |
hwmon: (shtc1) add support for the SHTC3 sensor
Add support for the Sensirion SHTC3 humidity and temperature sensor to
the shtc1 module.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Link: https://lore.kernel.org/r/20190905014554.21658-2-dan@dlrobertson.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/shtc1.rst | 19 |
1 files changed, 14 insertions, 5 deletions
diff --git a/Documentation/hwmon/shtc1.rst b/Documentation/hwmon/shtc1.rst index aa116332ba26..9b0f1eee5bf2 100644 --- a/Documentation/hwmon/shtc1.rst +++ b/Documentation/hwmon/shtc1.rst @@ -19,7 +19,17 @@ Supported chips: Addresses scanned: none - Datasheet: Not publicly available + Datasheet: http://www.sensirion.com/file/datasheet_shtw1 + + + + * Sensirion SHTC3 + + Prefix: 'shtc3' + + Addresses scanned: none + + Datasheet: http://www.sensirion.com/file/datasheet_shtc3 @@ -30,10 +40,9 @@ Author: Description ----------- -This driver implements support for the Sensirion SHTC1 chip, a humidity and -temperature sensor. Temperature is measured in degrees celsius, relative -humidity is expressed as a percentage. Driver can be used as well for SHTW1 -chip, which has the same electrical interface. +This driver implements support for the Sensirion SHTC1, SHTW1, and SHTC3 +chips, a humidity and temperature sensor. Temperature is measured in degrees +celsius, relative humidity is expressed as a percentage. The device communicates with the I2C protocol. All sensors are set to I2C address 0x70. See Documentation/i2c/instantiating-devices for methods to |