[NET]: Remove comx driver docs.

The drivers have already been removed 3.5 years ago.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 369 deletions

diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
deleted file mode 100644
index c82c0cf981b4..000000000000
--- a/Documentation/networking/slicecom.txt
+++ /dev/null
@@ -1,369 +0,0 @@
-
-SliceCOM adapter user's documentation - for the 0.51 driver version
-
-Written by Bartók István <bartoki@itc.hu>
-
-English translation: Lakatos György <gyuri@itc.hu>
-Mon Dec 11 15:28:42 CET 2000
-
-Last modified: Wed Aug 29 17:25:37 CEST 2001
-
------------------------------------------------------------------
-
-Usage:
-
-Compiling the kernel:
-
-Code maturity level options
-	[*] Prompt for development and/or incomplete code/drivers
-
-Network device support
-	Wan interfaces
-		<M> MultiGate (COMX) synchronous
-			<M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW)
-			<M> Support for HDLC and syncPPP...
-
-
-Loading the modules:
-
-modprobe comx
-
-modprobe comx-proto-ppp		# module for  Cisco-HDLC and SyncPPP protocols
-
-modprobe comx-hw-munich		# the module logs information by the kernel
-				# about the detected boards
-
-
-Configuring the board:
-
-# This interface will use the Cisco-HDLC line protocol,
-# the timeslices assigned are 1,2 (128 KiBit line speed)
-# (the first data timeslice in the G.703 frame is no. 1)
-#
-mkdir /proc/comx/comx0.1/
-echo slicecom	>/proc/comx/comx0.1/boardtype
-echo hdlc	>/proc/comx/comx0.1/protocol
-echo 1 2	>/proc/comx/comx0.1/timeslots
-
-
-# This interface uses SyncPPP line protocol, the assigned 
-# is no. 3 (64 KiBit line speed)
-#
-mkdir /proc/comx/comx0.2/
-echo slicecom	>/proc/comx/comx0.2/boardtype
-echo ppp	>/proc/comx/comx0.2/protocol
-echo 3		>/proc/comx/comx0.2/timeslots
-
-...
-
-ifconfig comx0.1 up
-ifconfig comx0.2 up
-
------------------------------------------------------------------
-
-The COMX interfaces use a 10 packet transmit queue by default, however WAN
-networks sometimes use bigger values (20 to 100), to utilize the line better
-by large traffic (though the line delay increases because of more packets
-join the queue).
-
-# ifconfig comx0 txqueuelen 50
-
-This option is only supported by the ifconfig command of the later 
-distributions, which came with 2.2 kernels, such as RedHat 6.1 or Debian 2.2.
-
-You can download a newer netbase packet from 
-http://www.debian.org/~rcw/2.2/netbase/ for Debian 2.1, which has a new
-ifconfig. You can get further information about using 2.2 kernel with
-Debian 2.1 from http://www.debian.org/releases/stable/running-kernel-2.2
-
------------------------------------------------------------------
-
-The SliceCom LEDs:
-
-red	- on, if the interface is unconfigured, or it gets Remote Alarm-s
-green	- on, if the board finds frame-sync in the received signal 	
-
-A bit more detailed:
-
-red:	green:	meaning:
-
--	-	no frame-sync, no signal received, or signal SNAFU.
--	on	"Everything is OK"
-on	on	Reception is ok, but the remote end sends Remote Alarm
-on	-	The interface is unconfigured
-
------------------------------------------------------------------
-
-A more detailed description of the hardware setting options:
-
-The general and the protocol layer options described in the 'comx.txt' file
-apply to the SliceCom as well, I only summarize the SliceCom hardware specific
-settings below.
-
-The '/proc/comx' configuring interface:
-
-An interface directory should be created for every timeslot group with
-'mkdir', e,g: 'comx0', 'comx1' etc. The timeslots can be assigned here to the
-specific interface. The Cisco-like naming convention (serial3:1 - first
-timeslot group of the 3rd. board) can't be used here, because these mean IP
-aliasing in Linux.
-
-You can give any meaningful name to keep the configuration clear; 
-e.g: 'comx0.1', 'comx0.2', 'comx1.1', comx1.2', if you have two boards
-with two interfaces each.
-
-Settings, which apply to the board:
-
-Neither 'io' nor 'irq' settings required, the driver uses the resources
-given by the PCI BIOS.
-
-comx0/boardnum	- board number of the SliceCom in the PC (using the 'natural'
-		PCI order) as listed in '/proc/pci' or the output of the
-	 	'lspci' command, generally the slots nearer to the motherboard
-		PCI driver chips have the lower numbers.
-		
-		Default: 0 (the counting starts with 0)
-
-Though the options below are to be set on a single interface, they apply to the
-whole board. The restriction, to use them on 'UP' interfaces, is because the 
-command sequence below could lead to unpredictable results.
-
-	# echo 0        >boardnum
-	# echo internal >clock_source
-	# echo 1        >boardnum
-
-The sequence would set the clock source of board 0.
-
-These settings will persist after all the interfaces are cleared, but are
-cleared when the driver module is unloaded and loaded again.
-
-comx0/clock_source - source of the transmit clock
-	Usage:
-
-	# echo line     >/proc/comx/comx0/clock_source
-	# echo internal >/proc/comx/comx0/clock_source
-
-	line	- The Tx clock is being decoded if the input data stream,
-		if no clock seen on the input, then the board will use it's
-		own clock generator.
-
-	internal - The Tx clock is supplied by the builtin clock generator. 	
-
-	Default: line
-
-	Normally, the telecommunication company's end device (the HDSL
-	modem) provides the Tx clock, that's why 'line' is the default.
-
-comx0/framing	- Switching CRC4 off/on
-
-	CRC4: 16 PCM frames (The 32 64Kibit channels are multiplexed into a
-	PCM frame, nothing to do with HDLC frames) are divided into 2x8
-	groups, each group has a 4 bit CRC.
-
-	# echo crc4	>/proc/comx/comx0/framing
-	# echo no-crc4	>/proc/comx/comx0/framing
-
-	Default is 'crc4', the Hungarian MATAV lines behave like this. 
-	The traffic generally passes if this setting on both ends don't match.
-
-comx0/linecode	- Setting the line coding
-
-	# echo hdb3	>/proc/comx/comx0/linecode
-	# echo ami	>/proc/comx/comx0/linecode
-
-	Default a 'hdb3', MATAV lines use this.
-	
-	(AMI coding is rarely used with E1 lines). Frame sync may occur, if
-	this setting doesn't match the other end's, but CRC4 and data errors
-	will come, which will result in CRC errors on HDLC/SyncPPP level. 
-
-comx0/reg	- direct access to the board's MUNICH (reg) and FALC (lbireg)
-comx0/lbireg	circuit's registers  
-
-	# echo >reg 0x04 0x0	- write 0 to register 4
-	# echo >reg 0x104	- write the contents of register 4 with
-				printk() to syslog
-
-WARNING! These are only for development purposes, messing with this will
-	result much trouble!
-
-comx0/loopback - Places a loop to the board's G.703 signals
-
-	# echo none   >/proc/comx/comx0/loopback
-	# echo local  >/proc/comx/comx0/loopback
-	# echo remote >/proc/comx/comx0/loopback
-
-	none   - normal operation, no loop
-	local  - the board receives it's own output
-	remote - the board sends the received data to the remote side
-
-	Default: none
-
------------------------------------------------------------------
-
-Interface (channel group in Cisco terms) settings: 
-
-comx0/timeslots	- which timeslots belong to the given interface
-
-	Setting:
-
-	# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots
-
-	# cat /proc/comx/comx0/timeslots
-	1 2 5 6 7 8 
-	#
-
-	Finding a timeslot: 
-
-	# grep ' 4' /proc/comx/comx*/timeslots
-	/proc/comx/comx0/timeslots:1 3 4 5 6
-	#
-
-	The timeslots can be in any order, '1 2 3' is the same as '1 3 2'.
-
-	The interface has to be DOWN during the setting ('ifconfig comx0
-	down'), but the other interfaces could operate normally.
-
-	The driver checks if the assigned timeslots are vacant, if not, then
-	the setting won't be applied.
-
-	The timeslot values are treated as decimal numbers, not to misunderstand
-	values of 08, 09 form.
-
------------------------------------------------------------------
-
-Checking the interface and board status:
-
-- Lines beginning with ' ' (space) belong to the original output, the lines
-which begin with '//' are the comments.
-
- papaya:~$ cat /proc/comx/comx1/status
- Interface administrative status is UP, modem status is UP, protocol is UP
- Modem status changes: 0, Transmitter status is IDLE, tbusy: 0
- Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m)
-               (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m)
- Debug flags: none
- RX errors: len: 22, overrun: 1, crc: 0, aborts: 0
-            buffer overrun: 0, pbuffer overrun: 0
- TX errors: underrun: 0
- Line keepalive (value: 10) status UP [0]
-
-// The hardware specific part starts here:
- Controller status:
-         No alarms
-
-// Alarm: 
-//
-// No alarms - Everything OK
-//
-// LOS  - Loss Of Signal - No signal sensed on the input
-// AIS  - Alarm Indication Signal - The remote side sends '11111111'-s, 
-//	it tells, that there's an error condition, or it's not
-//	initialised.
-// AUXP - Auxiliary Pattern Indication - 01010101.. received.
-// LFA  - Loss of Frame Alignment - no frame sync received.
-// RRA  - Receive Remote Alarm - the remote end's OK, but signals error cond.
-// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync.
-// NMF  - No Multiframe alignment Found after 400 msec - no such alarm using
-//	no-crc4 or crc4 framing, see below.
-//
-// Other possible error messages:
-//
-// Transmit Line Short - the board felt, that it's output is short-circuited,
-// 	so it switched the transmission off. (The board can't definitely tell,
-//	that it's output is short-circuited.)
-
-// Chained list of the received packets, for debug purposes:
-
- Rx ring:
-         rafutott: 0
-         lastcheck: 50845731, jiffies: 51314281
-         base: 017b1858
-         rx_desc_ptr: 0
-         rx_desc_ptr: 017b1858
-         hw_curr_ptr: 017b1858
-         06040000 017b1868 017b1898 c016ff00
-         06040000 017b1878 017b1e9c c016ff00
-         46040000 017b1888 017b24a0 c016ff00
-         06040000 017b1858 017b2aa4 c016ff00
-
-// All the interfaces using the board: comx1, using the 1,2,...16 timeslots,
-// comx2, using timeslot 17, etc.
-
- Interfaces using this board: (channel-group, interface, timeslots)
-          0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-          1 comx2: 17
-          2 comx3: 18
-          3 comx4: 19
-          4 comx5: 20
-          5 comx6: 21
-          6 comx7: 22
-          7 comx8: 23
-          8 comx9: 24
-          9 comx10: 25
-         10 comx11: 26
-         11 comx12: 27
-         12 comx13: 28
-         13 comx14: 29
-         14 comx15: 30
-         15 comx16: 31
-
-// The number of events handled by the driver during an interrupt cycle:
-
- Interrupt work histogram:
- hist[ 0]:        0 hist[ 1]:        2 hist[ 2]:    18574 hist[ 3]:       79
- hist[ 4]:       14 hist[ 5]:        1 hist[ 6]:        0 hist[ 7]:        1
- hist[ 8]:        0 hist[ 9]:        7
-
-// The number of packets to send in the Tx ring, when a new one arrived:
-
- Tx ring histogram:
- hist[ 0]:     2329 hist[ 1]:        0 hist[ 2]:        0 hist[ 3]:        0
-
-// The error counters of the E1 interface, according to the RFC2495,
-// (similar to the Cisco "show controllers e1" command's output:
-// http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126)
-
-Data in current interval (91 seconds elapsed):
-   9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors
-   0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs
-Data in Interval 1 (15 minutes):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 4 intervals (1 hour):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 96 intervals (24 hours):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-
------------------------------------------------------------------
-
-Some unique options, (may get into the driver later):
-Treat them very carefully, these can cause much trouble!
-
-	modified CRC-4, for improved interworking of CRC-4 and non-CRC-4
-	devices: (see page 107 and g706 Annex B)
-		lbireg[ 0x1b ] |= 0x08
-		lbireg[ 0x1c ] |= 0xc0
-
-	- The NMF - 'No Multiframe alignment Found after 400 msec' alarm 
-	comes into account.
-
-	FALC - the line driver chip.
-	local loop - I hear my transmission back.
-	remote loop - I echo the remote transmission back.
-
-	Something useful for finding errors:
-	
-		- local loop for timeslot 1 in the FALC chip:
-
-	# echo >lbireg 0x1d 0x21
-
-		- Switching the loop off:
-
-	# echo >lbireg 0x1d 0x00