path: root/Documentation
diff options
authorVandana Kannan <vandana.kannan@intel.com>2014-11-24 13:37:39 +0530
committerDaniel Vetter <daniel.vetter@ffwll.ch>2015-04-16 09:20:15 +0200
commit5c6706e5644b608c2270f1d17c1b277901b3a121 (patch)
tree5e495aaf5dbf555d77b1561ec3d5fdf233b4d8fa /Documentation
parentdrm/i915/bxt: add display initialize/uninitialize sequence (CDCLK) (diff)
drm/i915/bxt: add display initialize/uninitialize sequence (PHY)
Add PHY specific display initialization sequence as per BSpec. Note that the PHY initialization/uninitialization are done at their current place only for simplicity, in a future patch - when more of the runtime PM features will be enabled - these will be moved to power well#1 and modeset encoder enabling/disabling hooks respectively. The call to uninitialize the PHY during system/runtime suspend will be added later in this patchset. v1: Added function definitions in header files v2: Imre's review comments addressed - Moved CDCLK related definitions to i915_reg.h - Removed defintions for CDCLK frequency - Split uninit_cdclk() by adding a phy_uninit function - Calculate freq and decimal based on input frequency - Program SSA precharge based on input frequency - Use wait_for 1ms instead 200us udelay for DE PLL locking - Removed initial value for divider, freq, decimal, ratio. - Replaced polling loops with wait_for - Parameterized latency optim setting - Fix the parts where DE PLL has to be disabled. - Call CDCLK selection from mode set v3: (imre) - add note about the plan to move the cdclk/phy init to a better place - take rps.hw_lock around pcode access - fix DDI PHY timeout value - squash in Vandana's "PORT_CL2CM_DW6_A BUN fix", "DDI PHY programming register defn", "Do ddi_phy_init always", - move PHY register macros next to the corresponding CHV/VLV macros - move DE PLL register macros here from another patch since they are used here first - add BXT_ prefix to CDCLK flags - s/COMMON_RESET/COMMON_RESET_DIS/ and clarify related code comments - fix incorrect read value for the RMW of BXT_PHY_CTL_FAMILY_DDI - fix using GT_DISPLAY_EDP_POWER_ON vs. GT_DISPLAY_DDI_POWER_ON when powering on DDI ports - fix incorrect port when setting BXT_PORT_TX_DW14_LN for DDI ports - add missing masking when programming CDCLK_FREQ_DECIMAL - add missing powering on for DDI-C port, rename OCL2_LDOFUSE_PWR_EN to OCL2_LDOFUSE_PWR_DIS to reduce confusion - add note about mismatch with bspec in the PORT_REF_DW6 fields - factor out PHY init code to a new function, so we can call it for PHY1 and PHY0, instead of open-coding the same v4: (ville) - split the CDCLK/PHY parts into two patches, update commit message accordingly - use the existing dpio_phy enum instead of adding a new one for the same purpose - flip the meaning of PHYs so that PHY_A is PHY1 and PHY_BC is PHY0 to better match CHV - s/BXT_PHY/_BXT_PHY/ - use _PIPE for _BXT_PHY instead of open-coding it - drop _0_2_0_GTTMMADR suffix from BXT_P_CR_GT_DISP_PWRON - define GT_DISPLAY_POWER_ON in a more standard way - make a note that the CHV ConfigDB also disagrees about GRC_CODE field definitions - fix lane optimization refactoring fumble from v3 - add per PHY uninit functions to match the init counterparts Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'Documentation')
0 files changed, 0 insertions, 0 deletions