path: root/Documentation
diff options
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 12:03:34 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 12:03:34 -0800
commitb859e7d13bcc18b56faa7e2f78db5ba8ab874a15 (patch)
tree2762ac481bc2b2a472832473b888fff3d7d9b9d4 /Documentation
parentMerge tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac (diff)
parentMerge remote-tracking branches 'spi/topic/spidev' and 'spi/topic/txx9' into spi-next (diff)
Merge tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "Not a huge amount going on this release, mainly new drivers (there's a couple more waiting that didn't quite make the cut for this release too): - An interface for querying if the current transfer is the last in a message, allowing controllers that need special handling for the final transfer to use the core message parsing. - Support for Amlogic Meson SPIFC, Imagination Technologies SFPI, Intel Quark X1000 and Samsung Exynos 7 controllers" * tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (38 commits) spi/s3c64xx: Remove redundant runtime PM management spi: fsl-spi: remove unused variable assignment spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg() spi: core: Do not mangle error code from kthread_run() spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use spi: fsl-(e)spi: migrate to generic master queueing spi/txx9: Deletion of an unnecessary check before the function call "clk_disable" spi: cadence: Fix 3-to-8 mux mode spi: cadence: Init HW after reading devicetree attributes spi: meson: Select REGMAP_MMIO spi: s3c64xx: add support for exynos7 SPI controller spi: spi-pxa2xx: SPI support for Intel Quark X1000 spi: meson: meson_spifc_setup_speed() can be static spi: spi-pxa2xx: Add helpers for regiseters' accessing spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list spi: atmel: introduce probe deferring spi: atmel: remove compat for non DT board when requesting dma chan spi: meson: Add support for Amlogic Meson SPIFC spi: meson: Add device tree bindings documentation for SPIFC spi: core: Add spi_transfer_is_last() helper ...
Diffstat (limited to 'Documentation')
4 files changed, 64 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt
index 8a824be15754..a95603bcf6ff 100644
--- a/Documentation/devicetree/bindings/spi/spi-gpio.txt
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt
@@ -8,8 +8,10 @@ Required properties:
- gpio-sck: GPIO spec for the SCK line to use
- gpio-miso: GPIO spec for the MISO line to use
- gpio-mosi: GPIO spec for the MOSI line to use
- - cs-gpios: GPIOs to use for chipselect lines
- - num-chipselects: number of chipselect lines
+ - cs-gpios: GPIOs to use for chipselect lines.
+ Not needed if num-chipselects = <0>.
+ - num-chipselects: Number of chipselect lines. Should be <0> if a single device
+ with no chip select is connected.
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
new file mode 100644
index 000000000000..c7dd50fb8eb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -0,0 +1,37 @@
+IMG Synchronous Peripheral Flash Interface (SPFI) controller
+Required properties:
+- compatible: Must be "img,spfi".
+- reg: Must contain the base address and length of the SPFI registers.
+- interrupts: Must contain the SPFI interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - spfi: SPI operating clock
+ - sys: SPI system interface clock
+- dmas: Must contain an entry for each entry in dma-names.
+ See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+ - rx
+ - tx
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+Optional properties:
+- img,supports-quad-mode: Should be set if the interface supports quad mode
+ SPI transfers.
+spi@18100f00 {
+ compatible = "img,spfi";
+ reg = <0x18100f00 0x100>;
+ interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&spi_clk>, <&system_clk>;
+ clock-names = "spfi", "sys";
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt
new file mode 100644
index 000000000000..bb52a86f3365
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-meson.txt
@@ -0,0 +1,22 @@
+Amlogic Meson SPI controllers
+* SPIFC (SPI Flash Controller)
+The Meson SPIFC is a controller optimized for communication with SPI
+NOR memories, without DMA support and a 64-byte unified transmit /
+receive buffer.
+Required properties:
+ - compatible: should be "amlogic,meson6-spifc"
+ - reg: physical base address and length of the controller registers
+ - clocks: phandle of the input clock for the baud rate generator
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+ spi@c1108c80 {
+ compatible = "amlogic,meson6-spifc";
+ reg = <0xc1108c80 0x80>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 1e8a8578148f..6dbdeb3c361a 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -9,7 +9,7 @@ Required SoC Specific Properties:
- samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- samsung,s3c6410-spi: for s3c6410 platforms
- samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- - samsung,exynos4210-spi: for exynos4 and exynos5 platforms
+ - samsung,exynos7-spi: for exynos7 platforms
- reg: physical base address of the controller and length of memory mapped